Architectural Wood Veneers - High Quality Low Carbon Wood 005
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General information of low carbon wood
|
Raw material |
Sawdust, corn-straw and tailing, can be recycled after using. |
|
Technology |
Utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. |
|
Installation |
Stitching, wet-sticking and dry-fasten connecting |
|
Character |
Favorable corrosion resistance, non-ignitable, water-proof, UV-resistant, high resistance to fire, water and insects. |
|
Lead time |
30 days after receiving buyer's original L/C or Prepayment |
|
Package |
Seaworthy Export Standard Wooden Pallet |
|
Four breakthroughs |
Comprehensive utilization of natural resources: Be recyclable, using sawdust, corn-straw and tailing as materials. The product can be recycled after using. |
|
Low carbon and energy saving in the course of production: Adopting the independent individual property’s technology, utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. | |
|
Environmental and healthy in the course of construction and using: Synthesized by natural inorganic raw materials, nontoxic, odorless and non-radiative simple installation, which could save energy cost and reduce and waste emission, raise efficiency and reduce erection time. | |
|
From nature, beyond nature: Full realization of the natural texture, high resistance to fire, water and insects. Do not rot or fade after long time usage. Super self-cleaning needs low maintenance cost. Vivid color and appearance provides a wide space to designers. | |
|
Six advantages |
Lower more than 50% cost, enhance building's performance to price ratio. |
|
Cutting at will, Fixing easy, Shorting project time. | |
|
Good performance in resistance to elements, corrosion-resistant ,resistance to termite, fire resistance and water-resistant, far from distortion and discolorations in 30 years. | |
|
Well self-cleaning, low cost in later maintenance: Don't need professional maintenance in 30s(Cleaning with water only), saving much cost. | |
|
Customize the color, showing individuation: Beyond 400 kinds of colors, designers could exhibit their imagination. | |
|
Compound with natural inorganic materials: Without formaldehyde and toluol, sustained releasing negative oxygen ion, forming nature oxygen bar. | |
|
Special specifications are available on customers' requirements. | |
Specification of low carbon wood
Standard: 3000mm(L)×1200mm(W)×15mm(T)
Standard length: 3000mm
Standard width: 120mm,150mm,200mm,300mm(including 3mm kerf width)
Standard thickness: 15mm
Technical information of low carbon wood
|
Density |
1.26g/m3 |
Folding strength |
10Mpa |
|
Dry-shrinkage rate |
0.05% |
Elastic modulus |
7211Mpa |
|
Wet expansion rate |
0.17% |
Shear strength |
3.5Mpa |
|
Screw holding capability |
121N/mm |
Coefficient of heat conductivity |
0.69(W(m·k)) |
|
Frost resistance |
Thaw-freeze cycle after 30 times, no slip crack and peeling off | ||
|
Unpermeability |
No drop appearing on the bottom after 24 hours. | ||
|
Impact strength |
3.3KJ/m2 | ||
Products exhibition of low carbon wood
Low carbon wood sheets with thin grain
Low carbon wood sheets with thick grain
Project picture of low carbon wood
- Q: Veneer production process is this?
- The most effective way to improve the plasticity of wood is to adjust both the temperature and the moisture content at the same time to increase the temperature of the wood while increasing the moisture content of the wood
- Q: The following table lists the cooking criteria for several types of wood,
- The most widely used is the drum dryer. Comparison of thin wood, especially the thickness of less than 0.4mm of thin wood, must use a belt dryer.
- Q: Technology veneer and natural veneer distinction
- But it has a natural veneer than the advantages. That is not blistering. I think you should understand that. And its pattern of pattern.
- Q: What can the veneer be classified?
- according to the manufacturing method of classification Can be divided into sliced thin wood; peeling veneer; sawing thin wood; semi-circular peeling veneer. Often the use of slicing method
- Q: Wooden door with veneer ruled, pattern is produced by different cutting methods
- Rotary Cut - Install the logs in the center of the lathe, insert the knife at a slight angle, and then rotate the logs against the slicer to create a revolving veneer
- Q: The principle of veneer dyeing
- Dyed veneer production process by screening high-quality imported veneer, the use of high-tech processing technology to take off the veneer in the impurities and mineral lines
- Q: Often, the processing of natural vines is done by slicing the method.
- The program is reasonable not only the high rate of production, and the system is made of chopped thin wood, chord thin wood, the resulting high value of decorative products.
- Q: What is veneer, please explain in detail
- Veneer; veneer; hereinafter referred to as veneer) and its veneer decoration industry started in the last century 50's,
- Q: The Production process of cooking
- water temperature is best to maintain room temperature, and slowly warming, so as to avoid the thermal stress caused by wood cracking
- Q: What are the specifications for veneer?
- The price from a more than one square to several hundred and one square have, the general import of expensive than domestic
Send your message to us
Architectural Wood Veneers - High Quality Low Carbon Wood 005
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
