High Quality Low Carbon Oak Wood Veneers 003
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General information of low carbon wood
|
Raw material |
Sawdust, corn-straw and tailing, can be recycled after using. |
|
Technology |
Utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. |
|
Installation |
Stitching, wet-sticking and dry-fasten connecting |
|
Character |
Favorable corrosion resistance, non-ignitable, water-proof, UV-resistant, high resistance to fire, water and insects. |
|
Lead time |
30 days after receiving buyer's original L/C or Prepayment |
|
Package |
Seaworthy Export Standard Wooden Pallet |
|
Four breakthroughs |
Comprehensive utilization of natural resources: Be recyclable, using sawdust, corn-straw and tailing as materials. The product can be recycled after using. |
|
Low carbon and energy saving in the course of production: Adopting the independent individual property’s technology, utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. | |
|
Environmental and healthy in the course of construction and using: Synthesized by natural inorganic raw materials, nontoxic, odorless and non-radiative simple installation, which could save energy cost and reduce and waste emission, raise efficiency and reduce erection time. | |
|
From nature, beyond nature: Full realization of the natural texture, high resistance to fire, water and insects. Do not rot or fade after long time usage. Super self-cleaning needs low maintenance cost. Vivid color and appearance provides a wide space to designers. | |
|
Six advantages |
Lower more than 50% cost, enhance building's performance to price ratio. |
|
Cutting at will, Fixing easy, Shorting project time. | |
|
Good performance in resistance to elements, corrosion-resistant ,resistance to termite, fire resistance and water-resistant, far from distortion and discolorations in 30 years. | |
|
Well self-cleaning, low cost in later maintenance: Don't need professional maintenance in 30s(Cleaning with water only), saving much cost. | |
|
Customize the color, showing individuation: Beyond 400 kinds of colors, designers could exhibit their imagination. | |
|
Compound with natural inorganic materials: Without formaldehyde and toluol, sustained releasing negative oxygen ion, forming nature oxygen bar. | |
|
Special specifications are available on customers' requirements. | |
Specification of low carbon wood
Standard: 3000mm(L)×1200mm(W)×15mm(T)
Standard length: 3000mm
Standard width: 120mm,150mm,200mm,300mm(including 3mm kerf width)
Standard thickness: 15mm
Technical information of low carbon wood
|
Density |
1.26g/m3 |
Folding strength |
10Mpa |
|
Dry-shrinkage rate |
0.05% |
Elastic modulus |
7211Mpa |
|
Wet expansion rate |
0.17% |
Shear strength |
3.5Mpa |
|
Screw holding capability |
121N/mm |
Coefficient of heat conductivity |
0.69(W(m·k)) |
|
Frost resistance |
Thaw-freeze cycle after 30 times, no slip crack and peeling off | ||
|
Unpermeability |
No drop appearing on the bottom after 24 hours. | ||
|
Impact strength |
3.3KJ/m2 | ||
Products exhibition of low carbon wood
Low carbon wood sheets with thin grain
Low carbon wood sheets with thick grain
Project picture of low carbon wood
- Q: Often, the processing of natural vines is done by slicing the method. The process flow is as follows
- The use of these saws to produce veneer, the board rate is high, the quality of thin wood is better, chopper machine is more efficient.
- Q: A lot of Advantages of veneer
- Apply white glue to the surface of the applied wood. The veneer will be affixed to the surface of the wood, and plastic scraper along the veneer lines scrape out the bubble
- Q: Slicing of thin slices of wood
- after cooking treatment; the cooking process should be reduced to more than 40 ℃, it should slow down the heating rate
- Q: What is the veneer process?
- on the one hand the level of skilled workers Higher, on the other hand the use of low efficiency, longer heating time, and because the viscosity is not strong,
- Q: What can the veneer be classified?
- by type of classification Can be divided into natural thin wood; dyeing thin wood; combination of thin wood (technology veneer); splicing veneer; into thin velvet (non-woven veneer).
- Q: Often, the processing of natural vines is done by slicing the method.
- In the actual production, the diameter of less than 400mm of the logs are usually used Sawing program B, and the diameter of 400 ~ 800mm logs are used sawing D and E
- Q: What is veneer, please explain in detail
- Especially in the past 20 years, with China's furniture manufacturing and decoration industry jumping growth,
- Q: Veneer should pay attention to the different production processes
- But the technology veneer is widely recognized by the furniture industry still need time, science and technology on the wood of many misunderstandings, are the lack of factual basis, is the understanding of the errors.
- Q: The Production process of cooking
- First, the wooden side into the cooking pool, the tree species, wooden specifications should be carried out separately;
- Q: The Sliced ??veneer manufacturing process
- The width of the veneer is not less than the relevant requirement.
Send your message to us
High Quality Low Carbon Oak Wood Veneers 003
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
