High Performance Ceramic Fiber Board with Ceramic Filter Plate
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Low Heat Storage,low thermal conductivityExcellent compressive strength
Not fragile materials, excellent flexibility
CERAMIC FIBER BOARD
Product Series
1050Ceramic Fiber Board
1260Ceramic Fiber Board
Description
FUJI 1050/1260 Ceramic Fiber Board was processed by the advanced production line.which was adopted the full automatic control and the continuous- processing method.
FUJI 1050/1260 Ceramic Fiber Board have many typical characteristics.such as exact measurement.excellent toughness,excellent heat preservation and can be cut discretionally
The processing work is much advanced.which totally avoid the long production cycle and the low production capacity.
FUJI 1050/1260 Ceramic Fiber Board is divided in different series by the temperature.can be widely used as the back lining of industrial furnace and the hot surface of the low temperature furnace. It is one of the guarantees of reaching the energy conservation and the high quality.
Characteristic
Low Heat Storage,low thermal conductivity
Excellent compressive strength
Not fragile materials, excellent flexibility
Exact measurement,excellent flatness
Homogeneous structure, excellent machine-processed capability
Easily fixing specialty
Processed continuously,the fibers interweave shapely and excellent stability
Excellent chemical stability and thermal shock resistance
Application
Heat preservation and insulation materials as the back lines for the kilns in the field of cement building
Heat preservation materials as the back lines for the kilns in the field of ceramic
Heat preservation materials as the wall lines and back lines for the kilns in the field of metallurgy and petrochemical industry
Heat preservation materials as the wall lines and back lines for the Glass furnace.
Refractory and insulating materials for heat treatment equipment
The back lines of refractory brick for electrolytic reducing bath in aluminum factory
Materials of the wall lines and back lines of heat and pyroreaction equipment
- Q: The ceramic filter suddenly did not smoke, and later he was all right. What's the reason?
- How old the general ceramic filter suction main reason mud cake thickness is not much of a ceramic filter plate is different, because the ceramic filter backwash water, vacuum suction and nitrate are through the distribution valve, are often the same boat". See your description, you do not know the 5 line is about "5 disc or sideways 5 rows of ceramic plates, that is completely not suction or suction effect is poor, I hope to help you:
- Q: The ceramic filter plate is broken. What will happen to the vacuum pump?
- At this time, take the filtrate (this is not the first water slurry) will pollute the ceramic filter pipe, friction ring, filtrate pump, may damage the vacuum system, remaining in the pipeline in the pulp will recoil pressure under the action of pollution caused by the other ceramic plates, ceramic plates blocked him. Once the ceramic plate is broken (depending on the severity), it will make the vacuum distortion, resulting in ceramic filter suction effect worse or even no suction!
- Q: How many degrees does the ceramic filter melt?
- Spinel is basically over 1600-1700. It's not too acid proof.There are other materials such as silicon nitride. Ceramics can be more than 1300 degrees in temperature. So the material you are using now is unlikely to melt and melt, and you can change it into one of the top materials. Baidu, this stuff is all over the street.
- Q: Why should filter core be used in backwash of ceramic filter?
- The filter in the water filter of ceramic filter is used for filtering water.
- Q: Ceramic filter in vacuum pressure enough, the ceramic plate does not suck pulp, what is the reason for analysis?
- Ceramic filter plate.The ceramic filter plate does not match the blockage or selection of new plate porosity is generally around 40%, such as ceramic filter plate has hole blocking, the opening rate will become less, when the suction effect into 30% relatively new plate may be slightly worse, when the ceramic filter plate is used for a long time after the opening rate is 10% or less, then the ceramic filter plate suction effect will become very poor even suction. At this time, even if the vacuum suction is good, also do not suck sizing, you need to replace the new ceramic filter board.
- Q: What is the filtration accuracy of 50nm ceramic membrane?
- The filtration accuracy is the maximum particle size that the membrane can pass through.
- Q: What's the reason for high water content in filtration copper concentrate?
- Can the cleaning of ceramic plate meet the requirement?Such as cleaning of ceramic plate is not up to the requirements, plugging holes will increase the risk of ceramic plate, ceramic plate plug serious suction effect will become worse (filter cake moisture content increased, cake thickness reduction), cleaning of ceramic plate refers to washing and cleaning.Backwash to ensure that the water filter filter water pressure in the 0.1MPa or so, at least not less than 0.07MPa or less, it is necessary to consider before the filter water pressure is low or water filter element needs to be replaced.Joint cleaning to ensure that the ultrasonic can be no trouble, every time cleaning the amount of nitric acid up to standard. If the filtration effect is not ideal, the cleaning cycle can be washed from 45--60 every 8 hours, changed to 6--7 hours and cleaned for more than 1 hours.
- Q: What is the reason that the ceramic filter does not absorb mineral powder?
- There may be a fault filtrate pump, diaphragm pump damage, pump mechanical seal failure, a leak, two is no output or output to the liquid, the pressure is too low, the cleaning effect is not good, the pressure is too large, will cause damage and reduce the concentration of slurry filter plate.
- Q: What are the reasons for the program alarm of ceramic filter?
- If that is the ceramic filter tank body of the slurry concentration is diluted, has nothing to do with the ceramic filter itself, can think of ways to enter the ceramic filter tank before the slurry concentration increased, thereby improving the dewatering efficiency of ceramic filter.
- Q: What is the backwashing pressure of the ceramic filter?
- The working process of ceramic filter is: suction - drying - unloading - backwash - suction - drying - unloading - backwash...... In circulation, suction, the drying process is to make the slurry liquid by vacuum suction and capillary effect (usually water) through the filter media from the left, the filter cake on the filter medium (the two processes like syringe pumping), and then through the scraper discharge, after unloading, ceramic filter machine is complete a cycle in the absorption slurry, drying process, some fine particles may enter the filter medium or stacked on the surface (a lot of pipeline internal filtration medium ceramic filter plate), these small particles blockage will make the filter medium permeability and filtering effect of the loss from the poor, in order to reduce the possibility of blockage ceramic filter, will enter the backwash (this process is like a water jet injector). Ceramic filter backwash is through the pressure of water, these small particles plug discharge ceramic filter board.
Send your message to us
High Performance Ceramic Fiber Board with Ceramic Filter Plate
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches