Fiberglass Roving Yarn - E-Glass Fiber Assembled Roving for SMC
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 19040 Kgs kg
- Supply Capability:
- 500000 Kgs Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of E-Glass Fiber Assembled Roving For SMC
E-glass fiber assembled roving for SMC is typically used to produce automotive parts, doors, bathtubs, water tanks and sports apparatus.
Specification of E-Glass Fiber Assembled Roving For SMC
2400/4400/4800TEX
Product Properties of E-Glass Fiber Assembled Roving For SMC
1.Excellent anti-static property
2.Good choppablity
3.Excellent flowability
4.Good strand integrity, no fuzz and loose fiber
5.Excellent mechanical property
6.Good dispersion
Package of E-Glass Fiber Assembled Roving For SMC
The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows,
4 X 4 rolls/layer, 4 layer/pallet, 10 pallets
4 X 4 rolls/layer, 3 layer/pallet, 10 pallets.
Each layer is seperated with paperboard.Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage of E-Glass Fiber Assembled Roving For SMC
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃-35℃ and 35%-65% respecitively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
- Q: What are the main molding processing methods of plastics
- There are many methods of plastic forming. Six main forming methods are listed below: 1 injection molding and injection molding, extrusion molding. 2. extrusion molding, which is the main molding of thermoplastic plastic molding, 3 hollow blow molding, also known as the 4 compression molding also called compression molding. The upper and lower mold installation the template in the press on, the plastic material directly into the cavity, the mold is closed, full of plastic cavity in the heat and pressure, setting after plastic products. 5, injection molding and transfer molding. One of the main forming method is thermosetting plastics. It is feeding room, plastic pellets into mould in the heating, melting plastic under pressure through the pouring system of bottom mold transfer chamber fills the cavity, and then cure it. 6, solid molding molding plastics in melting temperature, in the molding process No obvious flow condition, for two times molding plastic sheet, such as vacuum molding, compression molding and air pressure molding, original for thin-walled parts molding, first used in the manufacture of thick wall parts. 7, other molding calendering, there are many casting plastic molding methods...
- Q: A chromic acid concentration and what kind of glass?reinforced?plastics should be used in chromic acid waste gas purification and recovery device.
- Rated condition is 2. * filtering grid should be cleaned regularly according to the degree of pollution. * according to different air volume. There are two types including vertical network format and horizontal network format. * Airflow direction of horizontal recycle collector is from right into the left, and chromic acid waste gas purification recoverer is mainly used for recycling and purifying chromic acid waste gas from electroplate chromate tank belt. * the bottom must be maintained at a level of 5 meters. *Face velocity passed through recoverer filter net must be maintained at 2 to 3 meters per second so that chromic acid can be expelled from bottom hole with efficency is over 90% and chromic acid liquid is recycled. * All air duct system before the recoverer is made from plastic plate. The chromic acid can be directly poured into the plating bath with the airflow direction cannot be reversed. The airflow direction of vertical collector is from bottom to top and it should be used together with BF4-72 type centrifugal ventilation machine. It can be cleaned once a month.
- Q: Is arbon fiber better than glass fiber reinforced plastic
- Lighter and more toughness.
- Q: What does glass fiber operating tools do ?
- wire drawing,drying, winding, fabric and so on.
- Q: Main characteristics of glass?reinforced?plastics grating
- long period of installation and use, aging resistance, free maintenance and so on. llightweight, glass fiber content of more than 30% (weight percent), beautiful. Glass?reinforced?plastics grating is based on unsaturated polyester resin (includes isophthalic,ethylene, phenolic aldehyde, bisphenol A) and is made up of glass fiber roving( wind or pultrusion, middle-alkali or non-alkali). It is formed by weave and mould pressing in metal mould or by heating after hand lay-up with impact resistance, steadiness, skid?resistance, anticorrosion, fire?retardant and weather resistance. Moreover, this product with insulation and thermal insulation property is flat in appearance, good in quality and is easy to cut.
- Q: What is the difference between the glass and glass?reinforced?plastics?
- Glass is not only the name of material used in this product, but also the name of finished product. Glass?reinforced?plastics, the name of the material, is a heating fixed plastics compositing glass fiber with a variety of other material.
- Q: What can glass fiber do?
- Glass is kniwn for a brittle material . Interestingly, once the glass is heated after being drawn into a much thinner than a human hair fiber glass, it seems it completely changes their own nature, being soft like synthetic fiber, being tougher than the same thickness of the stainless steel wire.
- Q: Production process of glass fiber reinforced plastic
- Simple glass reinforced plastics are melted together again
- Q: How to produce 0.3 mm glass fiber Chopped strand? What kind of glass fiber yarn is better?
- with strong ability in grinding). And when producing the asbestos shingle, there should be a progress of mixing the materials. The short fibercan be morceled by chopping machine or manually. The reason for short fiberis is avoid all fiber winding and fiber grinding (the main component of glass fiber is silica, and offal of glass fiber used for asbestos shingle. It is low cost, and do not need any special requirements. For the current market.
1. Manufacturer Overview
| Location | Zhejiang, China |
| Year Established | 1969 |
| Annual Output Value | Above US$ 150 Million |
| Main Markets | overseas companies in Hongkong, Canada, South Africa, South Korea, India, Italy, Singapore, France and many other countries and regions. |
| Company Certifications | ISO9001;ISO14001 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 40%-50% |
| No.of Employees in Trade Department | 21-50 People |
| Language Spoken: | English |
| b) Factory Information | |
| Factory Size: | Above 5000,000 square meters |
| No. of Production Lines | Above 5 |
| Contract Manufacturing | |
| Product Price Range | Average |
Send your message to us
Fiberglass Roving Yarn - E-Glass Fiber Assembled Roving for SMC
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 19040 Kgs kg
- Supply Capability:
- 500000 Kgs Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
