Ferro Silicon Best Seller In South Korea CNBM
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 0 m.t.
- Supply Capability:
- 20000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Ferro Silicon Description
Ferro Silicon is a kind of ferroalloy which is composed of ferrum and silicon. Ferro Silicon uses coke, quartz
(or silica) as raw materials and is made by electric furnace. Because silicon and oxygen are easily compound
into SiO2, the ferrosilicon is often used as deoxidizer in steelmaking.
Specification
Brand | Chemical Composition (%) | ||||||||||
Si | Al | Ca | P | S | C | Fe | |||||
<= | |||||||||||
FeSi75-A | 74.0-80.0 | 1.5 | 1 | 0.035 | 0.02 | 0.2 | Balance | ||||
FeSi75-B | 72.0-80.0 | 1.5 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi72 | 72 | 1.5 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi70 | 70 | 1.5 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi65 | 65.0-72.0 | 2 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi45 | 40.0-47.0 | 2 | 2 | 0.04 | 0.02 | 0.2 | Balance | ||||
Ferro Silicon Application
1. Fesi 75% is often used as deoxidizer in steel- making.
2. Ferrosilicon also can be used as alloy elements join agent, which is widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel.
3. It can be used as a reductant in ferroalloy production and chemical industry.
4. In iron industry it can be used as inoculant and nodulizer.
Packaging & Shipping
1. Plastic bag(antiproof) +Iron barrel, all adjustable to customer's specific demands.
2. Shipment within 3 working days after production.
Ferro Silicon Size
0-3mm,3-10mm,10-100mm or as the customers’ requirements
Packing
25Kg/bag, 1MT/bag or as your requirements.
Picture
- Q:Hard alloy die polishing with what can be reached Ukraine black brightness
- Recycling all kinds of scrap carbide, waste alloy powder, alloy polished powder
- Q:What are the meanings of cemented carbide codes, such as YW, YS30, YN10?Which company made its own brand? What is the composition?
- Hard alloy is one of the people familiar with the tools and materials, it is very difficult to weld by hard metal carbides (we, Tie) of powder metallurgy with CO, MO and NI as sintering binder. Its mechanical, physical and mechanical properties depend mainly on the kinds of metal carbides, properties, quantities, grain sizes, types and components of binders.In cemented carbides, the proper addition of Tie increases the content of hard Tic, and the higher the hardness of the alloy. The more the content of cobalt in the bonding phase, the lower the hardness of the alloy. Therefore, the hardness of We-Tie-eo alloy is higher than that of We-eo alloy. The hardness of We-eo alloy can be increased by adding Tae or Nbc. The higher the hardness of the cemented carbide, the better the wear resistance, but the lower the strength (bending), and the addition of Tac will improve the blade strength, while strengthening the blade resistance to fragmentation and breakage, fatigue strength also increased. Generally, the higher the hardness, the lower the toughness. In China's Cemented Carbide standard YB850-75, most carbide grades are We-Co (YG) and We-Tie-Co (YT) two.Domestic hardness alloy grade control: GB, brand ISO, P10, P20, M10, M20, K01, K10, K20, K30, domestic uniform brand YT15, YT14, YT5, YW1, YW2, YG3, P30, YG6x, YG6, YG8
- Q:Is there any pollution in the production of cemented carbide?
- The main pollutants in the production of cemented carbide are dust, waste residue and waste water, and the biggest influence on the environment is soot. According to regulations, waste gas can be divided into two categories: particulate matter, exhaust gas and gaseous pollutants. The exhaust gas of ferroalloy plant comes from ore smelting furnace, refining electric furnace, roasting rotary kiln, multi layer mechanical baking furnace and aluminum metal smelting furnace. Ferroalloy plant exhaust emissions, dust concentration is high, 90% of exhaust gas is silicon dioxide, but also contains chlorine, nitrogen oxides, carbon monoxide, sulfur dioxide and so on. Waste residue and waste water are the most serious pollution of chromium compounds, and there are also pollution of nickel compounds.The State Economic and Trade Commission, the State Environmental Protection Administration and other departments also jointly issued "on accelerating the restructuring of China's ferroalloy industry views" (in the economic and trade industry [1999]633), from 1999 to 2005, to stop the new types of ferroalloy electric furnace (kiln) and blast furnace.
- Q:How much does carbide WC contain?
- For example, YT15, which represents average TiC=15%, is tungsten carbide cobalt carbide with the remainder of tungsten carbide and cobalt contentTungsten, titanium, tantalum (niobium) carbidesIs the main component of tungsten carbide, titanium carbide, tantalum carbide (or niobium carbide) and cobalt. The hard alloy and hard alloy general or universal hard alloy.
- Q:What does carbide K15-K20 refer to?
- generally used to process Cast Iron and non-ferrous metals15 represents its abrasion resistance or impact resistance,The smaller the value, the harder the hardness of the table is and the less resistant it is to the impact;
- Q:How are cemented carbides separated from the cutting tools?
- Brazing heating to melt after the pain, you can take off!
- Q:Make cutting dosage
- YT for steel, steel castings, aluminum parts, not shock resistance. YG is used for rough cast iron parts, cast iron parts, shock resistance and high temperature resistance.
- Q:The existing 60*60 standard cast iron plate, above 3 hard alloy welding specifications, probably in the 30*30, in which the appropriate welding method, know the friends willing to enlighten ah, thanks in advance.Some friends have said the binder is a copper brazing, the basic can be settled. As far as I know, many methods such as welding, high frequency welding, oxygen welding, I want to find a kind of welding method. The key is to understand the trouble with us, surface and surface welding
- Welding hard alloy is the most used for brazing, welding of copper wire.
- Q:Hello, what's your company? What do you do with carbide? Thank you in advance
- Pro, what do you mean by that question? We are the hard alloy recycling companies, focus on hard alloy recovery, Qingdao cemented carbide business network, with the recovery of hard alloy scrap, hard alloy die, tungsten steel scrap recycling
- Q:What are the advantages of carbide V-CUT knives and diamond V-CUT knives?
- The process is more complex and difficult to process. The accuracy is difficult to guarantee. The material is hard and brittle at the same time. When it collides, it breaks easily and breaks the teeth. But the abrasion resistance is good; the V-CUT knife produced is very goodThe advantages of carbide V-CUT knives are: high hardness, high strength, high wear resistance, long service life, and remarkable improvement in production efficiency.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Ferro Silicon Best Seller In South Korea CNBM
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 0 m.t.
- Supply Capability:
- 20000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords