Specification

1.Why we use aluminum?

In Europe aluminium experiences high rates of recycling, ranging from 42% of beverage cans, 85% of 

construction materials and 95% of transport vehicles.Recycled aluminium is known as secondary aluminium, but maintains the same physical properties as primary aluminium. Secondary aluminium is produced in a wide range of formats and is employed in 80% of alloy injections. Another important use is for extrusion.

White dross from primary aluminium production and from secondary recycling operations still contains useful quantities of aluminium that can be extracted industrially.The process produces aluminium billets, together with a highly complex waste material. This waste is difficult to manage. It reacts with water, releasing a mixture of gases (including, among others, hydrogen, acetylene, and ammonia), which spontaneously ignites on contact with air;contact with damp air results in the release of copious quantities of ammonia 

gas. Despite these difficulties, the waste has found use as a filler in asphalt and concrete.

2.Specification and Application

ALUMINIUM COIL

ALLOY: AA1***

       AA3***

       AA5***

       AA8***

TEMPER: H14 H16 H18 H22 H24 H26 H32 O/F

THICKNESS:0.03MM-10MM

WIDTH: 30MM-1700MM

COATING: PE(POLYESTER),PVDF,EPOXY or Mill Finished.

STANDARD: GB/T 17748-1999

3.Why you choose us?

Our company promise the best quality, best service and best price.Welcome you to visit our factory!

With thickness less than 0.012 mm size is related to the diameter of the work roll (thickness) of very thin aluminum foil, due to the elastic flattening mill roll, with single rolling method is very difficult, therefore receives rolling method is adopted, namely between the two pieces of aluminum foil with lubricant, then combined the method of rolling (also called pack rolling).Not only can pack rolling rolling out a single thin aluminum foil rolling can't production, can also reduce the number of broken belt