Ductile Iron wafer butterfly valves DN200
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 80000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
A butterfly valve consists of body ,stem ,disc , actuator (manual actuator, worm-gear actuator , aerodynamic actuator or electric actuator) , and wafer type butterfly valve can implement the process for turning on turning off and regulating the flow by the circumrotation of stem and disc that is droved by actuators.
1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.
- Q: Classification of telescopic butterfly valve
- 2) additional torque seal butterfly valve. The seal is produced by a torque that is applied to the valve shaft(2) pressure sealed butterfly valve. The pressure is greater than the pressure on the seat or plate(3) automatic sealing butterfly valve. The pressure of the seal is automatically generated by the pressure of the medium. (1) vacuum butterfly valve. Butterfly valve with lower working pressure than standard atmosphere.(2) low pressure butterfly valve. Butterfly valve with nominal pressure PN<1.6MPa.(3) medium pressure butterfly valve. Butterfly valve with nominal pressure PN 2.5--6.4MPa.(4) high pressure butterfly valve. Nominal pressure PN is 10. 0--80.0MPa butterfly valve.(5) ultra high pressure butterfly valve. Butterfly valve with nominal pressure PN>100MPa. (1) high temperature butterfly valve. T>450 C butterfly valve
- Q: How many kinds of butterfly valves are there?
- 1. according to the structure classification (1) Central sealing butterfly valve (2) single eccentric sealed butterfly valve (3) double eccentric sealed butterfly valve (4) three eccentric sealed butterfly valve2., according to the sealing material classification (1) soft sealing butterfly valve. (2) metal hard sealing butterfly valve.3. according to the form of sealing classification (1) forced sealing butterfly valve (2) pressure sealed butterfly valve.4. classification according to working pressure (1) vacuum butterfly valve. 2) low pressure butterfly valve. (3) medium pressure butterfly valve. (4) high pressure butterfly valve. (5) ultra high pressure butterfly valve.5. classification by working temperature (1) high temperature butterfly valve. (2) medium temperature butterfly valve. (3) normal temperature butterfly valve. (4) low temperature butterfly valve. (5) ultra low temperature butterfly valve.
- Q: What does butterfly valve nps12cl150d373f4-150lb stand for?
- NPS (Nominal, Pipe, Size) abbreviation. Refers to the connection (including flanged and welding end) of the nominal diameter, followed by a digital unit is American Standard inches, 12 inches.NPS12 labeling system.CL is the abbreviation for class, and LB150 means the pressure is 150 poundsD stands for butterfly valves3 is expressed in the form of a turbine drive7 means of connection: to clip3 means sealing: 3 eccentricF4: the sealing material is PTFE
- Q: How can I get the fire signal butterfly valve?
- 1, the signal butterfly drive by the worm gear drive shaft and butterfly plate rotation, realize the opening and closing and control flow. 2, rotating the handwheel worm gear to the disc to open and close and adjust the flow to the handwheel clockwise rotation for the valve closed. 3, worm gear is arranged in the box body micro switch has two forms: A, in the gear box body is provided with open and close direction two microswitches, respectively, when the valve fully open and close action, connected to the control room "valve open" valve off "light source, the quasi it shows the state of the valve switch. B, in the driving device is arranged in the box body the microswitch (disc position close to 0 degrees), when the butterfly plate from 0 degrees to 40 degrees when the position of a micro switch, the output valve closed signal, 40 degrees to 90 degrees when the position of another pair of normally closed output valve opening signal. A cam that adjusts the touch microswitch and shows the different positions of the disc.
- Q: Butterfly valve is the control valve?
- The flow characteristics of butterfly valves can be approximately equal percentage characteristics, with the positioner can do adjust, is mainly used in large caliber, straight stroke control valve more than 200 volume weight will be great, it suggests using the butterfly valve.
- Q: Does the pneumatic butterfly valve need electricity?
- Definitely need control, so be sure to have electricity. You can control the switch on and off. If necessary, this valve can contact me.
- Q: I went online to check where was the pcv valve for a 2001 ford focus, but I didn't find it. Does anyone have a picture? Thanks
- 2001 Ford Focus Pcv Valve
- Q: i was changing valve seals and two dropped i can see the head of the valve but a magnet wont pull them up i put air the spark plug hole too but no luck 1985 ford bronco II
- well depends .. how far the piston was down and if the valve is still in the valve guide. intake you may have to pull the intake and feed it up from the intake port .. exhaust .. pull the manifold and feed it back up from the exhaust port.. and last .. pull the head .. if the the valve is still in the guide and the piston is not at the top .. you may could turn the engine slowly by hand to the top the piston may push up the valve up . you may be able to pull the valve up then..
- Q: My quot;check engine soonquot; light came on yesterday and soon after that I took it to the nearest Midas to have the diagnostic test run on it - they stated I needed an ERG valve. I have no clue what it is and was told that it could run $160. - $300. for my 1900 Astro van. what is an ERG valve? I have noticed that my van has a low humming sound when I'm driving it.
- If initially the codes confirmed that the EGR valve grew to become into defective and grew to become into no longer replaced this might smash the o2 sensor. whilst the EGR is caught open simply by fact of carbon strengthen the engine is taking in extra air it is coming from the blistered gases out of the exhaust and re burning them interior the process the EGR. The O2 sensor will examine this gases passing interior the process the exhaust and point out a lean mix of gasoline and could sign the ECM to strengthen the gasoline to the engine nsequently after a time of employing with mistaken mixtures the o2 sensor will fail. My suggestion is to change the EGR and the O2 sensor then highway try the vehicle.then have the codes rechecked. additionally if the engine isn't working mushy this might reason the transmission to act up.verify that the vacuum hose is linked to the modulator valve on the decrease back of the transmission. some transmissions have a working laptop or computer on a separate circuit interior the device and if the engine isn't working solid computer will p.c.. up the incorrect sign and transmission won't shift properly.. solid good fortune oh and the vehicle ECM or computer isn't your difficulty.
- Q: Butterfly valve structure and working principle
- How it works: the disc is driven by the stem, and if it turns 90 degrees, it can be opened and closed once. By changing the deflection angle of the plate, the flow of the medium can be controlled. There are two kinds of butterfly valves commonly used: clip type butterfly valve and flanged butterfly valve.
Send your message to us
Ductile Iron wafer butterfly valves DN200
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 80000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords