Copper Mine ues High Chromium Alloyed Grinding Ball made in Chian and in Top Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25M.T. m.t.
- Supply Capability:
- 200000M.T./Year m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Feature of Copper Mine ues High Chromium Alloyed Grinding Ball made in Chian and in Top Quality
1) In general, grinding steel ball has high hardness: surface hardness to 58-65 HRC, volume hardness of 56-65 HRC
2) impact toughness high: impact toughness more than 12 J / cm2.
3) broken rate is low: the actual broken rate is not higher than 0.5%.
4) loss of grinding forged steel ball round rate is low.
2. Index analysis of Copper Mine ues High Chromium Alloyed Grinding Ball made in Chian and in Top Quality
Product | Brand | DIA | hardness | Breakage ratio of ball | Impact fatigue life of ball | Numbers time | Metallographic organization |
Special high chrome casting iron ball | Cr26 | 15-150MM | ≥58 | 0.5% | 6 | 15000 | M+C |
Special high chrome casting iron ball | Cr20 | 15-150MM | ≥58 | 0.5% | 6 | 15000 | M+C |
Special high chrome casting iron ball | Cr15 | 15-150MM | ≥58 | 0.5% | 5 | 15000 | M+C |
High chrome casting iron ball | Cr12 | 15-150MM | ≥58 | 0.5% | 4 | 15000 | M+C |
High chrome casting iron ball | Cr8 | 15-150MM | ≥58 | 0.5% | 3 | 15000 | M+C |
Middle chrome casting iron ball | Cr5 | 15-150MM | ≥47 | 0.5% | 2 | 12000 | P+C |
Low chrome casting iron ball | Cr2 | 15-150MM | ≥45 | 0.5% | 1 | 12000 | P+C |
Casting ball | QTB | 15-150MM | ≥50 | 0.5% | - | 12000 | - |
Casting ball | QTM | 15-150MM | ≥52 | 0.5% | - | 12000 | - |
3. Chemical Composition of Copper Mine ues High Chromium Alloyed Grinding Ball made in Chian and in Top Quality
Product | Brand | Chemical composition(%) | ||||||||
C | Si | Mn | Cr | Mo | Cu | Ni | P | S | ||
Special high chrome casting iron ball | Cr26 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >23.0-30.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
Special high chrome casting iron ball | Cr20 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >18.0-23.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
Special high chrome casting iron ball | Cr15 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >14.0-18.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
High chrome casting iron ball | Cr12 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >10.0-14.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
High chrome casting iron ball | Cr8 | 2.1-3.3 | ≤2.2 | 0.3-1.5 | 7.0-10.0 | 0-1.0 | 0-0.8 | - | ≤0.10 | ≤0.06 |
Middle chrome casting iron ball | Cr5 | 2.1-3.3 | ≤1.5 | 0.3-1.5 | 4.0-6.0 | 0-1.0 | 0-0.8 | - | ≤0.10 | ≤0.10 |
Low chrome casting iron ball | Cr2 | 2.1-3.6 | ≤1.5 | 0.3-1.5 | 1.0-3.0 | 0-1.0 | 0-0.8 | - | ≤0.10 | ≤0.10 |
Casting ball | QTB | 3.2-3.8 | 2.0-3.5 | 2.0-3.0 | - | - | - | - | ≤0.10 | ≤0.03 |
Casting ball | QTM | 3.2-3.8 | 2.0-3.5 | 2.0-3.0 | - | - | - | - | ≤0.10 | ≤0.03 |
- Q: Casting parts need to be subjected to the kind of heat treatment after the weldment is finished
- 1, gray cast iron: General graphite annealing, to be heat treatment annealing, surface hardening etc.; ductile iron can be various: annealing, normalizing, quenching and isothermal quenching, surface treatment, chemical heat treatment.2. Pouring liquid metal into the casting cavity which adapts to the shape of parts. After cooling and solidification, the casting method is called casting. Castings obtained by casting are called castings. Casting structure design: ensure the working performance and mechanical performance requirements, consider the technical requirements and performance of alloy casting casting casting structure, casting structure design is reasonable or not, the casting quality, productivity and cost has a great influence.3. Heat treatment is a metal hot working process in which the material is in solid state by means of heating, heat preservation and cooling to obtain desired microstructure and properties
- Q: How do casting parts remove stress?
- Annealing treatment, according to different casting annealing treatment, eliminate thermal stress, if need to restore hardness or increase hardness, and then quenching treatment
- Q: Casting parts by shot blasting, spray painting, baking after the formation of very small rust spots, how to solve ah?
- The first process is very important. Shot blasting must be thorough. The solution is to wipe the surface of the paint with a release. Re shot
- Q: the parts of the threaded hole is casting, casting the hole directly, and then tapping or casting, and then punch 10When the casting is ready, punch it again before tapping it Is the hole casting good or is it punched and tapped on the drilling machine after casting?
- Aluminum alloy die-casting parts or casting box and other parts of the threaded hole, in the case of processing conditions, it is best to use wire tapping or machine tool processing! Direct casting is not advocated.
- Q: How to distinguish the forging parts and casting parts accurately
- Distinguish from performance:The processing performance of forged parts is higher than that of the same material. The forging parts are compact and have good mechanical properties, but the casting parts may have sand holes, holes, shrinkage holes and other defects, and their mechanical properties are inferior to those of forgings. At the same time, forging processing can ensure the continuity of the metal fibrous tissue, fibrous tissue to forging and forging shape consistency, metal streamline integrity, can ensure the parts with mechanical properties and long service life good.
- Q: What is the difference between casting and stamping parts?
- Separation process is also called blanking, the purpose is to make the stamping parts along a certain contour line from the sheet metal separation, at the same time guarantee the quality requirements of the separation section. Stamping is a highly efficient production methods, the use of compound die, especially the multi station progressive die stamping process can be completed in a multi machine, realized by belt uncoiling, leveling, punching, forming and finishing automatic production. High production efficiency, good working conditions, low production costs, can produce hundreds of parts per minute.
- Q: When there is no flaw detection for large casting parts, is there any crack inside?
- According to the industry standards, within the scope of the standard requirements to determine whether the product is qualified
- Q: Younger brother is to do casting valve, precision casting parts, the valve internal sand serious, but the appearance is very standard, this is why, for God answers, thank you!
- Increase the refractoriness and looseness of core sand
- Q: What's the cause of the choking of the casting?,
- 3. when casting the environment is humid, sand mold has not removed the moisture, when the casting, the moisture instantaneous transforms into the steam, causes the blowhole
- Q: The difference between sheet metal and casting parts
- Sheet metal refers to the metal sheet (which can be bent straight board, etc.) generally uniform thickness, can obtain the required parts by stamping, molding, welding, splicing and other processing methods.
1. Manufacturer Overview
| Location | Shandong, China |
| Year Established | 1983 |
| Annual Output Value | Above US$100 Million |
| Main Markets | South Asia, South Asia, Central America, Western Europe, Eastern Asia, Mid East, Oceania, Africa |
| Company Certifications | ISO9001;IS014001 Certificate |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Qingdao Port |
| Export Percentage | |
| No.of Employees in Trade Department | 3-5 People |
| Language Spoken: | English；Chinese；Japanese；Korean |
| b) Factory Information | |
| Factory Size: | Above 20,000 square meters |
| No. of Production Lines | 8 |
| Contract Manufacturing | Grinding steel balls;Grinding steel cylpebs;Grinding media;Grinding meida ball |
| Product Price Range | Average |
Send your message to us
Copper Mine ues High Chromium Alloyed Grinding Ball made in Chian and in Top Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25M.T. m.t.
- Supply Capability:
- 200000M.T./Year m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
