Butterfly ValveElectric wafer lug type eccentric DN30
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 set
- Supply Capability:
- 80000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Manual Wafer Butterfly Valve Description:
A butterfly valve consists of body ,stem ,disc , actuator (manual actuator, wormgear actuator , aerodynamic actuator or electric actuator) , and wafer type butterfly valve can implement the process for turning on turning off and regulating the flow by the circumrotation of stem and disc that is droved by actuators.A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.
2.Main Features of the Manual Wafer Butterfly Valve
Design & Manufacture acc. to API 609,MSS SP-67,BS5155,BS EN593.
Face to Face acc. to DIN3202,API609,MSS SP-67,BS5155,BS EN558.
Top Flange acc. to ISO5211.
Pressure test acc. to API598,BS EN12266-1,DIN3230,BS5155.
Side Flange acc. to DIN2501,ANSI125/150,AS2129,BS4504,BS10D&E,JIS10K
Nominal bore mm | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | ||||
Valve core diameter mm | 10 | 12 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
Rated flux coefficient Kv | 1.2 | 2 | 3.2 | 5 | 8 | 12 | 20 | 32 | 50 | 80 | 120 | 200 | 280 | 450 | |
Nominal pressure Mpa | 1.6 4 6.4 | ||||||||||||||
Match DKJ actuator
| specification | DKZ-4100 | DKZ-4200 | DKZ-4300 | DKZ-5400 | DKZ-5500 | |||||||||
Differential pressure Mpa | 6.4 | 4.0 | 4.0 | 4.0 | 3.5 | 2.3 | 2.0 | 1.42 | 1.4 | 0.91 | 0.55 | 0.35 | 0.26 | 0.17 | |
Match introduced actuator | specification | A+Z64 | |||||||||||||
Differential pressure Mpa | 6.4 | 6.4 | 4.0 | 4.0 | 3.7 | 2.5 | 2.2 | 1.6 | 1.5 | 1.0 | 0.6 | 0.4 | 0.3 | 0.2 | |
Rated travel mm | 10 | 16 | 25 | 40 | 40 | ||||||||||
Flux characteristic | Equal percentage Beeline | ||||||||||||||
Function style | Volt on Volt off | ||||||||||||||
Temperature range | Normal temperature: -20 — +200 degree abstraction of heat: -60 — +450 degree |
3. Manual Wafer Butterfly Valve Images:
4.Manual Wafer Butterfly Valve Specification:
Size: | DN50-DN1000 |
End flange: | ANSI B 16.1,EN1092,AS2129 |
Face to face: | ANSI B 16.10 |
Top flange: | ISO 5211 |
Normal pressure: | PN1.0/1.6MPa(150/200PSI) |
Body: | CI/DI/WCB/ALB/CF8/CF8M |
Disc: | DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel |
Stem: | 410/416/304/431/17-4PH/316/monel |
Seat: | NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE |
Suitable temperature: | -10~120 |
Medium: | Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc. |
5.FAQ
1. What is manual wafer butterfly valve?
A: Wafer style is the more common of the two and is less expensive than the lug style. The wafer style butterfly valve is just about the standard. It ís so common that no one even bothers to use the word "wafer" when ordering a butterfly valve. It is taken for granted that if a butterfly valve is ordered, a wafer style will be received.
2. How about the Installation of the Wafer Style Butterfly Valve?
A: Butterfly valves are installed by inserting the valve between two flanges using bolts or studs and nuts to hold it all together. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. That benefit is received using the lug style valve.
3. What is the working principle of manual wafer butterfly valve?
A: A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
- Q: The difference between butterfly valve d71x_10s and d341s-10
- Before distinguishing between the two, you must first read the identification of the valve type:D stands for butterfly valves,3 means that the worm gear is connected and the drive does not indicate the handle7 and 4 indicate pipe to clamp connection, pipe flange connection, respectively1 means single eccentric, that is, the stem is not in the center of the butterfly plateThe former S indicates the material name of the valve body - plastic, X means sealing and the lining material is rubberThe latter S indicates the sealing lining material code ---- plastic, and the valve body is cast iron.10 means stress.
- Q: What is the effect of nylon coating on butterfly valve plate? Thank you
- Mainly media will not be contaminated by rust on the body, you should say that the central soft sealing butterfly valve, the central valve is generally cast steel or cast iron material, so useNylon coatingLining up. There are soft seals, sealing performance is relatively high
- Q: How does the pneumatic butterfly valve control the angle of opening?
- The angle of the rotating shaft is controlled so that the angle of the butterfly valve is controlled. You just have a good electrical locator
- Q: Should I connect the butterfly valve before and after the pump? Or gate valve?
- Personally believe that import and export butterfly valve or gate valve can be, or other valves. One principle, easy installation and easy maintenance.As for how much pressure can be selected according to the size of the pump flange to set the general small caliber pump are 1 and 1.6 pressure general, unless you are a super high pressure multi-stage pump, generally 1 flanges fully meet the requirements of pump working pressure is generally not too high, living above the water temperature will not exceed 40 C, so you choose the space is still very large.
- Q: Is the pressure test of the centerline butterfly valve checked or checked?
- Every factory factory must require pressure tests.
- Q: I was wondering if someone could tell me the manufacturing date on this aircraft engine valve.
- Wow Hannah! That's a cool find for sure! It appears to be possibly a valve for a radial aircraft engine as it looks very similar to ones i've seen used in Pratt+Whitney R3350's etc. It looks like it could probably date to the 1940's up thru the 1950's. Look for a Part Number stamped on the valve or on the box. After WW2 there were all kinds of manufacturers making parts for airplanes. Many were gobbled up by competitors, converted to manufacturing other products or went out of business altogether. However, a few did hang on....and I think this may be what has become of Thompson Aircraft today.... Thompson Aerospace, Inc 22431 Antonio Parkway B160-102 Rcho Sta Marg, CA 92688-2804
- Q: What is the working principle of the electric butterfly valve, and what's the difference between the butterfly valve and the butterfly valve?
- General large bore turbine.What is the difference between worm gear pair butterfly valve and center line worm gear butterfly valve?The structure is the same, but the model is different, the central line refers to the butterfly valve, an eccentric structure (371), the clip butterfly valve can do 371, you can do 373, etc.. In more detail, the clamp can be a midline type, 1 single eccentric, 2 double eccentric, 3 is 371372373 midline, then it can be flange connection, it can also be a pair of clamp connection
- Q: My bike has now 6200 miles on the odometer. The manual says that a valve adjustment should be performed every 6000 miles. But the bike runs fine. Can I just have the valve checked or should I have them adjusted even though the bike is fine? What will happen if I just keep riding it?
- In reality, lots of bikes go their entire lives without a valve adjustment. In my opinion that is a great way to ruin a bike though. They have a maintence schedule for a reason. If a valve isn't seating, it can hurt performance and the valve will not be able to transfer heat to the head. That can burn a valve and cause detonation. You have to check valves to adjust them, and the labor for just checking will be nearly the same or identical to doing the adjustments. I do all my own wrenching, so money isn't really an issue, but if I were you, I would just bite the bullet and take it in.
- Q: For example, the arrow above is from left to right, and the direction of my current is from right to left. Is that ok? I have a diameter of 700 of the hard seal butterfly valve is so installed, but it will leak water, it will not leak, very serious
- The direction of the arrow on the valve body refers to the direction of the medium.Also known as butterfly valve, control valve has a simple structure, can be used for low pressure pipeline valve switching control is closed parts (disc or disc) is a disk, around the valve axis to achieve the opening and closing a valve, the valve can be used to control the flow of air, water, steam steam, all kinds of corrosive medium, mud, oil, metals and radioactive liquid media and other types of fluid. On the pipeline, mainly from cutting and throttling. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation.
- Q: Butterfly valve, two-way pressure and one-way pressure what is the difference?
- One way sealing butterfly valve is the front of the butterfly valve. When it closes, it must face the direction of the medium. The medium flows only in one direction, and the arrow on the valve body indicates the direction of the flow direction of the medium. Attention should be paid to the flow direction of the medium during installation. Two way butterfly valve is butterfly plate can face or back to the media flow direction, installation without attention to medium flow direction, in the valve body also does not indicate the direction of the medium flow arrow. Two way sealing butterfly valve stem force is greater than one-way butterfly valve stem. Design, the same diameter, pressure butterfly valve, two-way sealing butterfly valve rod diameter than one-way sealing butterfly valve stem diameter.
Send your message to us
Butterfly ValveElectric wafer lug type eccentric DN30
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 set
- Supply Capability:
- 80000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches