All-Round Ring-Lock Scaffolding System
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Material: | Color: | Pipe: | |||
MOQ: | Using life: | Size: | |||
Surface treatment: | Standards: | Brand: |
Packaging & Delivery
Packaging Detail: | by steel pallet |
Delivery Detail: | 30 days upon prepayment |
Specifications
Ringlock Scaffolding
1)Material:Q195 Q235 Q345
2)Pipe:48.3*3.2mm/3.8mm
3)Safe,reliable
Ringlock is a modular scaffold system which can provide major savings in labor costs while meeting the demands for safety,ease of handling and reductions in maintenance.
Standard
Use: Standards are the vertical members of ringlock scaffolding. They provide the
vertical support for scaffolding.
RINGLOCK STANDARD | |
(48.3mm x 3.2mm, Q345, Hot Dipped Galvanized) | |
Description | Weight |
Ring-Lock Standard 500mm | 3.3kg |
Ring-Lock Standard 1000mm | 5.5kg |
Ring-Lock Standard 1500mm | 7.8kg |
Ring-Lock Standard 2000mm | 10.03kg |
Ring-Lock Standard 2500mm | 12.25kg |
Ring-Lock Standard 3000mm | 14.5kg |
Ring-Lock Standard 4000mm | 19.72kg |
ledger
Use: Ledgers are the horizontal members of Ringlock scaffolding. They provide
horizontal support for loads and planks. Ledgers can also be used as mid rail and top or hand guard rails.
RINGLOCK LEDGER | |
(48.3mm x 3.2mm, Q235, Hot Dipped Galvanized) | |
Description | Weight |
Ring-Lock Ledger 1000mm | 4.80 |
Ring-Lock Ledger 1500mm | 6.50kg |
Ring-Lock Ledger 2000mm | 8.38kg |
Ring-Lock Ledger 2500mm | 10.54kg |
Ring-Lock Ledger 3000mm | 12.36kg |
Diagonal Brace
Use: The diagonal brace to make the overall stability of the scaffolding stronger.
(48.3mm x 2.5mm, Q235, Hot Dipped Galvanized) | |
Description | Weight |
Ring-Lock Diagonal <1000,2000>mm | 10.06kg |
Ring-Lock Diagonal <1500,2000>mm | 10.95kg |
Ring-Lock Diagonal <2000,2000>mm | 12.13kg |
Every size we can produce for you.
Ringlock scaffold features:
Quick erection: Ringlock scaffold are all pre-measured and just a hammer is required when erection.
Versatility: The revolutionary node point- rosette provides up to 8 connections in one plane, allowing the system scaffold highly adaptable for straight as well as curved structures, such as ship yards, power generation stations, petrochemical plants.
Low maintenance: The dip galvanized finish will greatly last the life of the products, no paint required, no more rust or corrosion, even they can be stored externally.
Safety: The reliable wedge connections prevent ledgers and diagonal braces from any kind of loosening, The rigid, right fit of all connections with concentric derivation of loads guarantees safety even at great heights.
Reasonable customer requirement is acceptable
- Q:A 56.0kg painter is on a uniform 23.5kg scaffold supported from above by ropes . There is a 5.0kg pail of paint to one side, as shown. How close to the end can he approach safely?
- Torques left, about right rope. Scaffold is 6m long. 23.5/6 = 3.91667kg per metre. 3.91667 x 5m = 19.58335kg/m. 5kg x 3m = 15kg/m. Total = 34.58335kg/m torque. Torque right. 1 x 3.19667 = 3.91667kg/m. Subtract right from left, = 34.58335 - 3.91667 = 30.6667kg/m can be applied by the painter. 30.6667/ 56 = .548 metre, the painter can move to the right of the right rope.
- Q:is it safe to get an industrial/scaffold and weaving piercing at the same time?
- It's not SUPER dangerous, but I wouldn't recommend getting them at the same time.
- Q:Bowl buckle scaffold height more than the number of meters is required to set the level of scissors
- Scaffolding design. To meet the needs of the project, and identify its use, the maximum static load, dynamic load and horizontal stress; the design parameters selected and fittings, shall not be lower than the current national and industry related safety technical standards.4 scaffolding in the construction of the need to change the original structure, Gago (wide), to its use, etc., must be verified by the technical department, and the approval.
- Q:Tell me how much the shear strength can reach MPa, thank you
- The rail is made of steel plate, the load is 0.11kN/m, the safety net load is 0.0050kN/m2. Under the foot of the small cross bar on the top of the big bar, and a small bar between the main node. Basic wind pressure 0.35kN/m2, height variation coefficient 1.2500, shape coefficient of 1.1280. The standard value of bearing capacity of foundation is 190kN/m2, the basal area is 0.250m2, and the coefficient of bearing capacity is 1.
- Q:I have already got a cartilage piercing, and I was considering getting a scaffold bar. I don't mind pain, but soon as it was in an unusual place, I was just a little bit curious.
- Well it is different for everyone, but generally....yes.
- Q:at what age can you get a scaffold/industrial piercing in england without parental consent?
- there actually are no laws in the UK about piercings other than the genitals and female nipples (you have to be 16 to get pierced in any of those locations) it is up to individual studios on what age they don't require parental consent. the best thing to do would be to contact your local shop.
- Q:Basically iv had my scaffold for around 2 years, it is completely healed. About six months ago i had to take the single bar out and put two separate bars in, i went to the shop i had it done at and they sold me two clear labret bars, at the time i did not realise that these were much thinner than my normal bar and because after time they became brittle and discoloured i changed them to two metal eyebrow bars as a short term solution, i need some advice on what to do regards changing back to a single scaffold bar, i would like to freely be able to change between a single bar and two bars/hoop, but im sure it would cause too much damage to my ear and too much pain to keep stretching it to a scaffold bar to then let it go down and stretch it again i will be needing a single bar at weekends not in the week, what should i do?
- What you should do is stop drinking bong water.
- Q:Scaffolding construction specification is what? Do you know?
- Load requirements of the scaffolding: masonry works per square meter 2700N, decorative works per square meter 2000N, scaffolding per square meter 2500N,Scaffolding scaffolding per square meter 1000N, special circumstances to be determined by calculation.4, left foot hand eye regulation: a single exclusive console scaffold should be set foot on the wall as a small bar in the eye, the fulcrum, pay attention to not allow foot hand eye parts: adobe walls, soil nailing wall, hollow brick, brick cavity wall, independent column, half brick wall and 180 thick brick the wall brick lintel and a beam into a 60 degree angle of the triangle, windows and doors on both sides of brick and 1 3/4
- Q:The role of scaffolding and the basic requirements for scaffolding
- 1, to have enough firmness and stability, to ensure that during the construction of the specified load and climate conditions, no deformation, tilt and shaking2, to have enough area to meet the requirements of material, transportation, operation and walking3, the structure should be simple, erection, demolition and handling to facilitate
- Q:How to calculate the amount of steel pipe in the bowl buckle scaffold formwork system? What is the good software or experience of the eldest brother?
- According to the bearing capacity of the vertical bar, according to the gravity of the beam and slab, the stress analysis of the horizontal member is carried out
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
All-Round Ring-Lock Scaffolding System
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords