Air Vent Valve of Standard Control Brass Automatic
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:If the valve in the pipeline throttle, such as open and open 50%, the valve before and after the pressure of how to calculate, how the flow changes?
- Well, it's not easy. And you do not give the specific structure of the valve, so there is no way to talk about the calculation. The simplest way is to install the pressure gauge and the flow meter on both ends of the valve, and read the data directly.
- Q:What does the valve specification "3/4CL150" mean?
- Size: DN20 pressure rating: 150 pounds American Standard
- Q:How to suppress the valve?
- Valve pressure is generally divided into 2 parts. One is shell pressure test, one is sealing test pressureShell pressure test is 1.5 times the pressure of the valve. For example, the pressure on your valve is 16 pressure. Then the shell test pressure will reach 24 pressureThe pressure on the seal is 1.1 times the pressure of the valve. For example, the pressure on your valve is 16 pressure. Then the pressure test on the seal will reach 17.6 pressure. That's all right.
- Q:Z11H/Y forged steel gate valves H/Y what does that mean?SZ45H S what do you mean?Blow 2Z41YGY-40P, what do you think?What does NKZ61H vacuum valve NK mean?What does DS/Z64H water seal valve DS mean?Specific valve number how to see ah, detailed information, thank you!
- Structure of code structure of code seal vertical plate type single eccentric sealing type 0 single eccentric center 5 vertical plate 1 6 2 7 three double eccentric double eccentric eccentric 3 three eccentric 7 linkage 4 linkage 9 structure of code structure of code lifting straight through 1 swing single type 4 vertical more than and 2 petal angle 5 type 3 dual valve type 6 butterfly valve 7 Table 9 check valve structure of code the sealing surface and lining material code, in accordance with the provisions of table 10. Table 10 the sealing surface of the valve seat sealing surface or liner material code or liner material code sealing surface or lining material code or code of lining material tin based bearing alloy seal (Babbitt) B Monel M alloy T enamel C nylon plastic rubber X N steel boriding nitriding steel D P hard alloy Y fluorine plastic lining F lead Q ceramic G austenitic stainless steel R Cr13 stainless steel H S note: the plastic body directly processed seat sealing surface material code with "W". When the sealing surface of the sealing material is not the same, the material name is indicated by the material with low hardness. The value of the nominal pressure of 10 times, according to the number of MPa (1MPa=106Pa). The valve body material code represented by the letter, in accordance with the provisions of table 11. Table 11 the valve body material body material material code code code C chromium nickel molybdenum stainless steel R Cr13 stainless steel H S plastic steel chromium molybdenum copper and copper alloy I T malleable cast iron titanium and titanium alloys K A L Aluminum Alloy CrMoV V Cr Ni stainless steel P Z gray cast iron ductile iron Q. In the original standard of nominal pressure equal to or less than 1.6MPa gray cast iron and the nominal pressure is greater than or equal to 2.5MPa carbon steel valve omitted the code.
- Q:Is there any difference between the valve and the water valve?
- Oil valve with water valve is that the oil valve is over the oil, and the valve is over water, the type of fluid is not the same.Valve (Famen) is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.Valves used in fluid control systems, from the simplest stop valve to a very complex automatic control system used in a variety of valves, a wide range of varieties and specifications. Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow. The valve according to the material is divided into cast iron valves, cast steel valves, stainless steel valves (201, 304, 316), chrome molybdenum steel, chromium molybdenum vanadium steel valves, valve, dual phase steel valves, plastic valves, non-standard customized valve material etc..
- Q:Why is copper used in cryogenic valves?
- Contact with water does not corrode easily。he influence of temperature on copper is smaller than that of steel. Especially in the valve stem, there is also the important gear part, copper!
- Q:What do the D373W and D373H of the valve mean?
- Butterfly valve, worm drive for the folder inclined plate, H alloy steel lining, W for the valve body directly processing sealing surface.
- Q:Why is the valve on the pipeline not the same size as the pipe, and how much of a crude pipe can be given? Thank youI'm sorry, I didn't make it clear that when doing pipe work in the factory, for example, 60 of the pipe, and in this pipeline to install the valve to choose DN50, and so on.
- The valves on the pipe should be of the same size, which saves costs and reduces head loss.
- Q:What are the specifications of the valves PN25, DN50?
- Upstairs professional level can be seen very solid.... Clap your hands... Popular speaking, that is, the valve bore is 50, resistance to pressure is below 25, is no problem.
- Q:What valve is the YQZ45X-16Q?
- Specifically, YQ usually is the enterprise code, Z valve, 4 representative flange, 5 representatives of the dark bar, X (soft) rubber seal (gate coated with rubber material), nominal pressure 16 representative (PN) 1.6Mpa, Q on behalf of the valve body is made of ductile cast iron. If you add the valve bore (DN), it will be more detailed.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Air Vent Valve of Standard Control Brass Automatic
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
