Air Evacuation Valve DN508 with Solar Water Heater Exhaust Valves /73mm of Solar Water Heater Parts
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q: How to find all kinds of mysterious valves of human body?
- Many cell signal channels have been found, and if you can find each signal, the channel will be almost the same. That's the mysterious valve you want, but it's hard.
- Q: Why is copper used in cryogenic valves?
- Copper, which is rarely available, is easily deformed at low temperatures and is much more WCB or WCC.Below -46 degrees C, SA352, LCB.LCC
- Q: Is there any problem with connecting the geothermal valves with other geothermal pipes?
- Material is the same, the fuse will not cause shrinkage when you can use
- Q: What is the valve?
- Is the switch, switch on the pipeline and can walk on water, air, oil and so on go. A lot of categories, you can control the on-off, control pressure safety valve, as well as a lot of filtering valves.
- Q: I used to do pumps, and now feel the future of the valve better, looking for a valve to do proxy, but my own economic strength is not good, I do not know if there is no possible to do?
- Many of them are now in Fujian valve valve agent many manufacturers are now seeking cooperation in the valve and pump after all or many different places to the other industries also need a process to proxy depends on your targeted customer base is better than the brand also has the advantage of brand price comparison
- Q: The general signal valve installation, or other valve installation is not installed with the groove flange clamp hoop Yucca or direct way? What's the convenient way to install the following diagram? I don't understand. Neither groove, flange nor hoop. Thank you, sir!
- For clip type, the two flanges on the pipe are drawn with studs, and the middle is the butterfly valve
- Q: What is the difference between a stop valve (a power station valve) and other valves?
- Compared with other valve products, the valve is characterized by high temperature and high pressure. If the pressure is lower than that of the universal valve, it is also lower than the common valve. Because of its performance, technical characteristics and special working conditions, the products can not be replaced by other products.The utility model is suitable for cutting off or connecting the pipeline medium on the pipelines of various systems of the fire power plant. Applicable medium: non corrosive media such as water and steam. Compared with other valve products, the valve is characterized by high temperature and high pressure and unique self sealing design. The higher the pressure, the more reliable the seal is. Because of its performance, technical characteristics and special working conditions, the products can not be replaced by other products.
- Q: How can the material be checked by valve approach? What experiments do you need?
- (8) the throttle valve does not test the tightness of the closing parts, but the strength test and the tightness test of the stuffing and the gasket shall be carried out.(9) the pressure test, the valve closing force only allows a person's normal physical strength to close; not augmented with tools like leverage (except torque wrench), when the hand wheel diameter is greater than the wait at 320mm, allowing two common off.(10) with a sealed valve, should be taken out of packing for sealing test, sealed after the official closed, check whether leakage. When gas is used as a test, check the water in the stuffing box. When sealing test is carried out, the upper seal is not allowed to be in the tight position.(11) when the valve with drive device is tested and its tightness is tested, the sealing test shall be carried out by using the driving device to close the valve. For manual drive units, seal test shall also be done with the actuating closing valve.(12) the by-pass valve installed on the main valve after the strength test and the sealing test. The strength and tightness test of the main valve is carried out. The main valve should be opened when the closing member is opened.(13) iron valve strength test, the application of Pratia tapping valve and valve cover, check whether there is any leakage.(14) the valve test, in addition to the provisions of the plug valve to allow sealing surface oiling, other valves are not allowed in the sealing surface of the oil test.(15) when the valve pressure test, the blind plate on the valve pressure should not be too large, so as to avoid deformation of the valve, affecting the test results (cast iron valve if pressed too tight, will be damaged).(16) after the valve test pressure, should promptly remove the water and clean the valve, should also be prepared for the test record.
- Q: Name: valve actuatorFunction: control valve switch by controlling air flow sizeIntended classification commodity code: 8412310090 (other linear acting pneumatic power unit, pressure cylinder)Shanghai Pudong Airport customs change classification: 84123900 (other pneumatic power unit)Commodity code information given by China Customs official network: 8412310090 (actuator, valve parts, valve actuation, pneumatic)Our goods encoding 8412310090 is classified to the Shanghai Pudong Airport customs dismissed, there are no friends of this commodity encoding on the official website of the detailed specifications defined, I Secretary in accordance with the valve function into 8412310090 encoding. Thank you
- 84798990 straight stroke valve actuator84798990 angle stroke valve actuator84798990.90 all intelligent electric valve actuator84818010 valve actuator84819010 valve actuator85371090 electric valve actuatorFor the past 3 years, the shipment code, but not the same as yours, for reference
- Q: How are the types of valves classified?
- Valve (Famen) is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.classificationFunction and use(1) cut off categories: such as gate valve, globe valve, plug valve, ball valve, butterfly valve, needle valve, diaphragm valve and so on. Cut off valve, also known as closed-circuit valve, stop valve, whose role is to connect or cut off the pipeline medium.Check valves, also known as check valves or non-return valves, check valves belong to an automatic valve, its role is to prevent the pipeline medium backflow, to prevent the pump and drive motor reversal, as well as the leakage of container media. Pump water off the bottom valve check valve also belongs to class.The function of the relief valve is to prevent the medium pressure in the pipeline or device from exceeding the required value so as to achieve the purpose of safety protection.Control valve, throttle valve and pressure reducing valve, its role is to regulate the media pressure, flow and other parameters.(2) vacuum type: such as vacuum ball valve, vacuum flapper valve, vacuum air charging valve, pneumatic vacuum valve, etc.. Its function is to change the direction of the air flow in the vacuum system, adjust the air flow rate, cut off or connect the vacuum system of the pipeline, and the component is called the vacuum valve.(3) special uses such as pigging valves, vent valves, drain valves, exhaust valves, filters, etc.. The exhaust valve is an essential auxiliary component in the pipeline system. It is widely used in boilers, air conditioners, petroleum, natural gas, water supply and drainage pipelines. Often installed in the commanding heights or elbows, etc., to exclude excess gas pipeline, pipe road to improve the use of efficiency and reduce energy consumption.
Send your message to us
Air Evacuation Valve DN508 with Solar Water Heater Exhaust Valves /73mm of Solar Water Heater Parts
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
