Air Vent Valve with High Quality Standard Control Brass Automatic
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q: Proportional valve why than other small pipeline valves
- 3.7 machinesGraphical representation of numbers, names, symbols3.7.1 motors include synchronous or asynchronous and micro AC and DC motors3.7.2 generator3.7.3 centrifugal liquid pump, liquid from open end, closed end3.7.4 piston pump liquid from the open end, closed end3.7.5 pump water from the mouth into the mouth closed3.7.6 vacuum pump gas from the open end, closed endThe 3.7.7 screw and the small end of the turbo compressor represent compressed gasThe small end of the 3.7.8 piston compressor represents compressed gasThe small end of the 3.7.9 membrane compressor represents compressed gas3.7.10 turbine low pressure gas expansion after the big endian representation3.7.11 said the main piston expander after expansion of low pressure gas3.7.12 turbo expander small end said high-pressure low end big endian representation3.7.13 motor brake expander small end said high-pressure low end big endian representationThe heat exchanger or Freon evaporator for 3.7.14 water and freon refrigeration unit
- Q: Valve connections - two how do different connections work?
- The inlet and outlet of valve are respectively connected in two different ways: one end adopts flange connection, the other end adopts thread or socket.
- Q: Why is copper used in cryogenic valves?
- The rigidity of copper is better, and the friction parts are not easy to produce adhesion. The influence of temperature on copper is smaller than that of steel. Especially in the valve stem, there is also the important gear part, copper!
- Q: What is called protective valve, and other valves what is the difference?
- Protection valve should be in the air defense valve, can be copper gate valve. (according to the specific use of civil air defense requirements, design institute does not count).2, while the protection valve should be a locking device with the valve, not the general valve can be replaced.
- Q: What valve is the YQZ45X-16Q?
- Specifically, YQ usually is the enterprise code, Z valve, 4 representative flange, 5 representatives of the dark bar, X (soft) rubber seal (gate coated with rubber material), nominal pressure 16 representative (PN) 1.6Mpa, Q on behalf of the valve body is made of ductile cast iron. If you add the valve bore (DN), it will be more detailed.
- Q: Tell me the exact address, or the phone number in the market. Where is the industrial zone (the valve) in Hefei? Please help, thank you
- On the valve network to find the best, you can find the valve business in Anhui
- Q: Yongde jiekelong valves and valves of the good faith
- Fujian Xiamen huashenghong Sanitary drainage fittings. Furniture guide rail, hardware, Taiwan locomotive. All of the above are the strongest domestic brands, high quality, stable performance, durable, buy a lifetime warranty, quality products. Domestic airport, water cube, bird's nest are using the above brand accessories.
- Q: Excuse me American Standard pressure test valve GB standards are much ~ is how much valve pressure can play much pressure? Thank you
- The standard is different, the test is not the same, what kind of valve you, a domestic valve only do stress testing, in fact, the pressure can generally be guaranteed, many are bad at high temperature or life testing above
- Q: Why can't the clip type check valve be directly connected with the pipe mouth or other valves?
- The clip type check valve is made up of two discs to prevent backflow.If the clip check valve is connected to the other valve, the disc may touch the valve and cause the check valve not to be fully opened or closed. This is a preliminary analysis of "enter the valve", for reference only!
- Q: What is the diameter of a general pipe valve?
- The relation between the common mark and the nominal diameter:1, plastic pipes (U-PVC, water pipes, PPR tubes): Phi 20-DNl5, Phi 25-DN20, Phi 32-DN25, Phi 40-DN32, Phi 50-DN40, Phi 63-DN50, Phi 75-DN65, Phi 90-DN80, Phi 11O-DNl00, Phi 160-DNl1502, seamless pipe: DN15- 22mm DN20- 27mm DN25- phi, Phi Phi Phi Phi 34mm, DN32- 42mm DN40- 48mm DN50- 60mm DN65-, Phi Phi 76 (73) mm, DN80- 89mm DN100- 108mm DN125- phi, Phi Phi 133mm, Phi 159mm, Phi DN150- DN200- 219mm, DN250- 273mm3, DN15---1/2--- four; DN 20---3/4--- six; DN 25---1, DN 32--1 1/4 -- an inch; inch two; DN 40---1 1/2 DN 50--- - an inch and a half; 2 - two inch DN 65---; 2 1/2, two and a half inches; DN 80--- 3 - three inch two; DN 100--- 4 - four inches; DN 125-- 5 - DN 150--- 6 - five inch; six inch 8---- eight inch 200--- DN;
Send your message to us
Air Vent Valve with High Quality Standard Control Brass Automatic
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
