Air Evacuation Valve SUFA with Solar Water Heater Exhaust Valves /73mm of Solar Water Heater Parts
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:What does valve DN50/80 mean?
- DN50/80 refers to the size of the valve. That is, the circulation diameter is 50mm/80mm.
- Q:What are the main equipments for valve production?
- I know these gate valves, globe valves, plug valves, ball valves, butterfly valves, needle valves, diaphragm valves, check valves, and throttle valves
- Q:and today the boss told me that I would like to do a valve of the commodity inspection information, and nothing else to me, which master taught meI am a professional intern, our company is doing the valve outlet, today my boss asked me to do a valve inspection data, what other data are not for me, which foreign trade master teach me ah, depressed ah ah ah???
- First of all, you have to check the HS encoding of your product.The corresponding HS code will have a regulatory condition followed by different regulatory conditions that mean different procedures (or certificates), such as what you call "B".What aspects must be examined in commodity inspection?Different products to implement different inspection and quarantine methods, the general is to do a customs clearance on the OK. The products you mentioned above may not need to do customs clearance (see what kind of valve you are, so you'd better check the conditions again)Is commodity inspection agent or business enterprise? Do you need to check every export?Generally not many agents are on the line, and if the HS regulatory conditions have to do customs clearance, then each time to do.Is there any standard or basis for inspection? Where can I find out the knowledge in this area?
- Q:What courses in the University involve valves?
- Pressure vessel design, the valve is essentially a pressure to withstand the container. The valve can be understood fundamentally.
- Q:What valve is the DN 25?
- This is only the aperture of the valve. It does not represent the form of the valve.
- Q:How much is the 150LB of the valve?
- Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow.
- Q:Why is copper used in cryogenic valves?
- Copper, which is rarely available, is easily deformed at low temperatures and is much more WCB or WCC.Below -46 degrees C, SA352, LCB.LCC
- Q:What does "DN15" mean? What does "PN 16" mean?
- Valve nominal diameter 15mm, valve nominal pressure 1.6MPa
- Q:What do O and S mean on the valve?
- Generally used in process valves, operating conditions required to open and close, especially in the case of pneumatic actuators installed, the loss of power and gas supply valve when the state
- Q:What kind of valves are best used for sand drain valves?
- Suzhou ATW Valve Co. Ltd production of sealing ball valve, Suzhou ATW Valve Co., according to the condition of solid particles, long-term research and in practice, and achieved good results in the condition of solid particles. You can try!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Air Evacuation Valve SUFA with Solar Water Heater Exhaust Valves /73mm of Solar Water Heater Parts
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords