Air Evacuation Valve with Solar Water Heater Exhaust Valves and Solar Water Heater Parts
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Packaging & Delivery
Packaging Detail: | standard export packing, steel pallets, wooden pallets, customers required |
Delivery Detail: | 10 Days |
Air Evacuation Valve Specifications
1. good structure
2. pressure and impact
3. stability performance
Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.
2.Product Introduction
Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer ring, valve lid, Valve base.
Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard
3.Working Principle
1.Static status: Once you set up a pressure range. Normally, pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.
2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.
3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.
4.Features
1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.
5.Our Services
Private Customized:
We design different Pressure Relief Valve according to specific requirement.
Customers’ Guidance:
Please leave the following info in inquiry
1. What’s the raw material ( carbon steel or stainless steel )
2. What’s the entrance diameter( 508 mm /273 mm or customized)
Because with these factors, we are able to give you a fast answer.
- Q:What valves are needed on the construction site?
- Order valves1, according to the use of place, use, and understand the relevant laws and regulations, specifications, standards, policies, approval may be used after the selection of valves suitable for various requirements;2, confirm the working conditions of valve, applicable medium, working pressure and medium temperature;3, determine the nominal diameter corresponding to the pipe: DN (mm), NPT, NPS (");4, determine the way to connect with the pipe: flange type, internal (external) thread type, welding type, clamp type, clamp type, card sleeve type, etc.;5, determine the valve operation mode of driving: manual, worm gear drive, pneumatic, electric, hydraulic, electromagnetic, electro hydraulic, etc.;6, confirm the types of valves: gate valve, globe valve, throttle valve, plunger valve, ball valve, butterfly valve, diaphragm valve, plug valve, check valve, safety valve, drain valve, pressure reducing valve and other special valves;7, determine the use of valves: switching type, adjustment type, safety type and so on;8, determine the valve shell and internal parts of the material: carbon steel, alloy steel, stainless steel, ductile iron, gray cast iron, copper alloy, aluminum alloy, plastic and so on;9, determine the valve sealing performance requirements, sealing level or sealing leakage;10, determine the valve coating requirements, packaging requirements, transportation requirements;11, special needs of the valve should also be determined: structure length, valve height, appearance size, flow resistance, emission capacity, flow characteristics, protection level, explosion-proof performance and other parameters;12, determine the valve installation position and posture.
- Q:The total valve of my natural gas was closed by the attitude I tried. Now I can't open it. I need to use gas. Who knows how to drive it? What skills do I have? I'm talking about the main valve.
- General domestic weather is more ball valve, counterclockwise turn 90 degrees can.
- Q:If the valve in the pipeline throttle, such as open and open 50%, the valve before and after the pressure of how to calculate, how the flow changes?
- the preset pressure after the valve, thus maintaining the dynamic pressure balance valve, and non compressible medium, mainly for the purpose of regulating the flow, especially in the petrochemical industry, power industry, if the specific calculation of a valve is more difficult, but a lot of data will provide the valve valve opening and flow of the corresponding graph, the landlord is really interested in learning more, can go to the Xinhua Bookstore to find the valve selection manual valve related content, which will introduce calculation method.
- Q:How to better maintain the valve?
- How to maintain the valve?Enter the same as other mechanical products, but also the need for maintenance. This work well, can extend the service life of the valve, the following will introduce the valve maintenanceStorage and maintenanceThe maintenance of the purpose is to keep the valve in the custody of the damage, or lower quality. In fact, improper storage is one of the important reasons for valve damageThe valve custody, should be arranged in good order, a small valve on the shelves, large valves can be neatly arranged in the warehouse on the ground, not arbitrary lumber pile, do not let the flange face contact with the ground. This is not only for beauty, mainly to protect the valve, not to touch badBecause the storage and handling properly, hand wheel broken, crooked stem touch the fixed nut hand wheel and stem loosening loss and so on, these should avoid unnecessary losses.We temporarily on the short-term use of the valve, should remove the asbestos packing, in order to avoid electrochemical corrosion damage to the valve stem.I just entered the library on the valve, to conduct inspections, such as during transport into the water or dirt to wipe clean, re storedThe import and export of valves to use wax paper or plastic sheet sealed to prevent dirt insideThe valves on the machined surface rust in the atmosphere should be coated with anti rust oil, protectI placed outside the valve, must be covered with linoleum or tarpaulins like rain, dust items. Keep the storage of the valve clean and dry
- Q:What's the valve as a unit?
- Generally used as a unit of measurement
- Q:How about the quality of FITOK valves?
- Purely under the banner of what import, in fact, everyone knows, is the genuine domestic goods.
- Q:How does the valve rust die?
- Valve rust, and see what material, what type, the normal model iron, small, then change it directly. Large direct buy derusting lubricants, stainless steel just, then take the acid wash
- Q:and today the boss told me that I would like to do a valve of the commodity inspection information, and nothing else to me, which master taught meI am a professional intern, our company is doing the valve outlet, today my boss asked me to do a valve inspection data, what other data are not for me, which foreign trade master teach me ah, depressed ah ah ah???
- National commodity inspection; stainless steel products; plastic tableware; domestic porcelain; toys; wooden products; furniture; bicycles; baby carriages; shoes; clothing; lamps and lanterns; plates; household appliances; bamboo / Wood / rattan / willow / grass / banana / vine furniture etc.
- Q:1/2, what does 1/4 valve mean? I don't understand. What does this number mean? Have a valve to introduce me, do not copy a pile of online introduction, I want to concise
- 1/2 is 4 points caliber, =15mm 1/4 is 2 points, caliber concise
- Q:What does 1/2 mean in valve specification?
- 1/2 is American Standard, said 1/2. Equivalent to GB DN15, nominal diameter 15mm, indicating that the diameter of the pipe is 15mm. In the plumbing industry, it's called 4 points.Valve specifications in common use:Say: American Standard - GB4 points - 1/2 - DN156 points - 3/4 - DN201 inches - 1 - DN251 inches 2 - 1 and 1/4 - DN321 and a half - 1 and 1/2 - DN402 inches - 2 - DN50
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Air Evacuation Valve with Solar Water Heater Exhaust Valves and Solar Water Heater Parts
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords