Φ219～Φ711 CFOE mill roll forming machine
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Φ219～Φ711 CFOE mill roll forming machine
Φ219 Φ711 CFOE mill is the newest product in our company, which adoptsCFOE patent technology from our company. CFOE means continuous flexible formingand straight seam submerged arc welded pipe. There are special advantages inthe mill. The mill is continuous production, which is no need to change therollers in rough-forming section when the specification needs to be changed.Compared with ERW, the quality and energy consumption of CFOE is easier to becontrolled, and is welded better and low consumption. The welding seam of CFOEovercomes the shortages of long welding seam and difficult inspection on spiralwelding seam after inbuilt. Compared with UOE and JCOE, the investment cost andproduction cost are low.
The quality of CFOE welding seam is the best in allwelding seam technology. CFOE is the most reliable, and there is no circularinterface welding seam on the pipe, which is easy to weld, inspect, maintainand repair. The pipe produced by the mill just covers most pipes which are currentlyused by oil, gas casing. The mill also has a good market prospect. Annualproduction capacity is 50,000-100,000 tons.
If there are smalldifferences between CFOE cost and spiral welded pipe cost, nobody will buyspiral welded pipe on high grade pipeline. CFOE welded pipe will replace fullyspiral welded pipe in high grade pipeline, and have a good market prospect.
CFOE can be the complementmill for the JCOE mill. Because it is hard and uneconomical for UOE and JCOE toproduce the pipes within the diameter range of Φ219～Φ711. There are outstanding advantages such as less productioncost and high production capacity. Due to low production capacity and over highprice of JCOE mill, which create the serious competition problem, it can makeup middle and large diameter in JCOE.
1.Suitable material | Color steel sheet , galvanized steel sheet,aluminum sheet |
2.Installation Dimension (L*W*H): | 6.5m*1.5m*1.4m |
3.Main motor power | 3KW with Cycloidal reducer |
4.Hydraulic station power | 3KW |
5. Hydraulic oil pump | CB-E 310 |
6.Thickness of material | 0.3mm~1.0mm |
7.Diameter of principal axis | Φ70-90mm |
8.Material expand width | 1000mm |
9.Electric tension | 380V 3phase 50HZ or as the customer's requirements |
10.Material of roller | High grade 45# forged steel plated with hard chrome plating |
11.Controlling system | PLC |
12.Processing speed | 3-6m/min |
13.Processing precision within | 1.00mm (depend on design) |
14.Material of cutting blade | Cr12 mould steel with quenched treatment |
15.Kind of drive | 0.6 inch chain link bearing model 6210 |
16.Roller station | 8-20 Rollers |
17.Roller material | high grade 45#steel; Cr12 quenching |
18. Leak frame load-bearing | 4.6T |
- Q:What kind of material and what heat treatment are used for pressing roller (molding, feeding, cutting force, heavy load, heavy load) of sheet steel rolling machine?
- Non bonding wear of rolled material (especially stainless steel strip, etc.)
- Q:Improvement in rolling forming process
- Can not meet the slender rod, thin-walled tubes and other rigid parts of the processing.
- Q:What is the surface rolling forming machine process?
- Due to the rolling surface of metal plastic deformation, so that the surface microstructure of cold hardening and grain refinement, forming a dense fibrous, and the formation of residual stress, hardness and strength, so as to improve the surface wear resistance, corrosion resistance and compliance.
- Q:Introduction of roll forming process
- With the progress of technology and the development of production, more and more attention has been paid to the roll forming process.
- Q:A roll forming machine, rolling out of the length is always not up to a fixed size, not too small, that is, more than that, what is the cause?
- According to my experience, there should be a problem with the boot encoder (also known as the digital wheel). Thank you. I hope I can help you.
- Q:Process mould for rolling forming process
- Rolling forming is more complicated and requires higher than rolling thread. The die design is based on the different shapes of the workpiece, the design of the rolling plate into a cross section or a few sections, can use synchronous type; also can use grading type.
- Q:Material and equipment for roll forming process
- Rolling process is a cold forging process, which can be used for rolling and forming a lot of materials. Among them, low carbon steel is a material commonly used in rolling forming, and non-ferrous metal is more suitable for roll forming.
- Q:What is rolling forming processing?
- Ironing the surface of the workpiece with a raised micro wave crest to fill the concave micro troughs, thus changing the distribution of the peaks on the surface, and obtaining smaller surface roughness values.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Φ219～Φ711 CFOE mill roll forming machine
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
