Plastic Tubes - 2024 New PPR Pipes and Fittings for Home Water Conveyance
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 20000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Brief Introduction：
The comprehensive technical performance and economic indicator of PP-R are much better than galvanized pipe, UPVC pipe, polyethylene-aluminum compound pipe, PE-X (cross-linked polyethylene) and polybutylene pipe etc. For this reason PP-R is the leading products and widely used for feed-water piping in developed countries in Europe and America.
German Standard DIN8077 and DIN8078.
Nowadays PPR pipes win more attention and have been used all over the whole world more widely with its excellent sanitization performance, high heat resistance, compression resistance, corrosion resistance, pliability and seismic performance which make PP-R the real environmental friendly pipe.
Specifications：
Standard: DIN8077/8078
Material: R200P from Korea
Size: DN20-63
Color: Green, White, Grey, Blue
Product Applications:
1.Distribution for cool and hot water
2.Duct for drinkable water system
3.Pipes for kinds of high-temperature and low-temperature heating system
4.Pipes for heating and cooling settings in solar energy system
5.Connecting pipe for air conditioner
Main Product Feature：
Large drum hub to maximize cable life
Self-activating automatic brake hold the load securely when crank handle is released
With cable or strap
Safety guard cover available
Widely used in the double beam bridge crane and gantry crane
Easy to install and high quality
Compact structure and reasonable design
Could be mounted on t he ground or wall!
Double drum!!
Advantages：
1, High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
2, Heat insulation and Saving Energy: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty or contaminated by bacterium.
3, Corrosion Resistant: resist chemical matters or electron chemical corrosion.
4, Lower Installation Costs: light weight and good hot-melt performance can reduce installation costs by as much as 50% over metal piping system.
5, Long Life: more than 50 years under normal conditions.
6, Recycled and Environment-friendly.
Product Description:
Pressure | Size(mm) | Pressure | Size(mm) |
PN1.25MPA | 20*2.0 |
PN1.6MPA | 20*2.3 |
25*2.3 | 25*2.8 | ||
32*2.9 | 32*3.6 | ||
40*3.7 | 40*4.5 | ||
50*4.6 | 50*5.6 | ||
63*5.8 | 63*7.1 | ||
75*6.8 | 75*8.4 | ||
90*8.2 | 90*10.1 | ||
110*10.0 | 110*12.3 |
Product Show:
Our Factory:
- Q:Are plastic tubes resistant to discoloration from oils and greases?
- Yes, plastic tubes are generally resistant to discoloration from oils and greases.
- Q:Are plastic tubes suitable for shipping and transportation?
- Yes, plastic tubes are suitable for shipping and transportation. They are lightweight, durable, and can protect the contents inside from damage during transit. Additionally, plastic tubes can be sealed tightly to prevent any leakage or contamination.
- Q:I have a hole ins a plastic tube that contains water how do I seal the hole?
- You need to give more information: 1. What type of plastic hose (acrylic, PVC, etc.)? 2. Can the affected area be drained temporarily for repairs? 3. What is the hose hooked to (both ends)? 4. Any additonal pertinent info that may help us to help you.
- Q:How are plastic tubes sealed?
- Plastic tubes are typically sealed through various methods such as heat sealing, ultrasonic sealing, or using adhesive or screw-on caps.
- Q:Am I even safe to drive to the mechanic or should I just two it? Holy crap, that could have been there for months for all I know since I last checked.
- That is the air intake hose between the air filter and the throttle body. It is allowing unfiltered air into the engine which will accelerate wear and contaminate delicate sensors.
- Q:What is the minimum diameter of plastic tubes?
- The minimum diameter of plastic tubes can vary depending on the specific application and manufacturing process, but it is typically around 1 millimeter (mm) or smaller.
- Q:I have seen one in a music video but i dont know what it called it makes the the voice sound electronic i think???
- the pianos with the big tubes coming out the top? .. i belive your talking about a organ...
- Q:We currently use round bottom glass test tubes on our automation but suffer a large dead volume. We are looking to find a supplier of low dead volume glass/plastic test tubes to trial
- That's an unusual question. MANY years ago (50 or so) when we used to run a lot of pregnancy tests by utilizing Leopard Frogs, we used to use V-bottomed test tubes to spin down the sediment. Frankly, that's pretty much the only example I can remember where we used them. But I would think that they are still around. I would suggest you contact a laboratory supply house or two or three, and ask them. They are much more likely to be able to give you an answer than us geeks on the Yahoo medicine board. The stuff I used 50 years ago might not be around anymore.
- Q:You've seen cans of Pet or Carnation Evaporated Milk in stores, right? Why would anyone buy milk that evaporated, how can the stores get away with selling it? Can't people buy milk that's still around that you can see? This Crazy Glue that is so strong it holds a man up in mid air who wears a steel hat that's glued to a steel beam. Remember that ad? How is it the glue doesn't stick to the inside of the plastic tube it comes in?
- The answer to the milk is easy, that is the process that the milk goes through before it is put into the can, FYI Evaporated milk has been around for many generations and was and still used in baking [ask you parents how long a generation is] As for the glue it does not stick to the container because there is no air in the container. Leave the cap off and it will like any other glue get hard.
- Q:How do you prevent plastic tubes from bending?
- One way to prevent plastic tubes from bending is by reinforcing them with materials such as metal or fiberglass. This adds strength and rigidity to the tubes, making them less likely to bend under pressure. Additionally, using thicker-walled tubes or increasing their diameter can also help prevent bending.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Plastic Tubes - 2024 New PPR Pipes and Fittings for Home Water Conveyance
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 20000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
