12/15/18 Micron Metalized BOPP Film For Lamination
- Ref Price:
-
- Loading Port:
- Ningbo Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1*20'FCL m.t.
- Supply Capability:
- 700 Metric Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description Of 12/15/18 Micron Metalized BOPP Film For Lamination:
1 metallized layer have good adhesion, well proportioned, high brightness
2 good barrier function
3 Excellent printing properties
Technical Data Of 12/15/18 Micron Metalized BOPP Film For Lamination
12um,15um,18um,Thickness of Aluminum layer 400A,we can produce on customer’s request.
Thickness of film | Thickness of aluminum layer | Width | Diameter | Core size | |||
12-50μm | 300-400Å | ≤2320mm | ≤800mm | 76mm(3″)152mm(6″) | |||
Specification :12um,15um,18um,Thickness of Aluminum layer 400A,we can produce on customer’s request. | |||||||
Typical product performance： | |||||||
Item | Unit | Standard value | Test method | ||||
Thickness of film | μm | 20 | ASTM D-374 | ||||
Tensile Strength | MD | Mpa | 130 | ASTM D-882 | |||
TD | 268 | ||||||
Elongation | MD | % | 165 | ASTM D-882 | |||
TD | 50 | ||||||
Heat Shrinkage (120℃，2min) | MD | % | 3.8 | ASTM D-1204 | |||
TD | 1.2 | ||||||
Heat seal strength | N/15mm | 4.2 |
| ||||
Wetting Tension | mN/m | 38 | ASTM D-2578 | ||||
Friction Coefficient | —— | 0.35 | ASTM D-1894 | ||||
Haze | % | 0.9 | ASTM D-1003 | ||||
Glossiness | % | —— | ASTM D-2457 | ||||
Thickness of Aluminum Layer | Å | 380 |
| ||||
(Square resistance)Ω/□ | 1.53 | GB/T 15717 | |||||
(Optical density )O.D | 1.9 | X·Rite361 | |||||
(Light transmittance)VLT | 1 | ASTM D 1746 | |||||
Equality Tolerance of Metallizing Layer | % | ±10 | GB/T 15717 | ||||
Application Of 12/15/18 Micron Metalized BOPP Film For Lamination
VMBOPP is made of bopp metallized with aluminum under vacuum environment at a high temperature, it is widely used in the industry of packaging,decoration, label, adhesive, gift packing and others
Pictures Of 12/15/18 Micron Metalized BOPP Film For Lamination
- Q:Waterproof electrode, waterproof welding
- 3, the more the more welding when the weld, the better the location, until the leak attributed to a little. At this time according to the size of the overflow pressure can be used in different ways: 1, with a tap into the cone of the welding plug, such as holes, temporarily blocked the hole, and then welding. 2, if the hole small, but the water more urgent. At this time may wish to elongate the arc, the use of electric home hot hole around the baked, the use of peripheral metal heat expansion, temporary swelling of the pores or simply hammer the hole immediately after the welding. Require this spot welding to be quick and accurate. When the droplets will be blocked after the hole, immediately off the arc. Action to be fast, so that the droplets have been blocked quickly cooled and completed welding. If the arc is too slow, then the back of the droplets have been re-melting, re-blowing under pressure. To be a little at the hole after the cooling, according to the need for re-welding.
- Q:What is the impact of TPO waterproofing membrane welding performance?
- Factors affecting the welding performance of TPO coil mainly in the following areas: 1. Material melting point and welding window;
- Q:Surfacing isolation layer is the application of what, how to achieve surfacing isolation layer weld.
- The surfacing isolation layer is mainly used to separate the main surfacing layer from the base metal, especially when the surfacing layer is welded directly to the base material. It is usually used with the third component, but with the surfacing layer and Base metal can be a good fusion of metal welding consumables, in the surfacing surface of the first welding a layer, and then on this basis and then need to re-welding the metal.
1. Manufacturer Overview |
|
|---|---|
| Location | Zhejiang, China |
| Year Established | 1996 |
| Annual Output Value | Above 1.0 Billion RMB |
| Main Markets | Europe; North America; Middle East; Southeast Asia |
| Company Certifications | ISO 9001 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Ningbo; Shanghai |
| Export Percentage | 30% - 40% |
| No.of Employees in Trade Department | 6-10 People |
| Language Spoken: | English; Chinese |
| b)Factory Information | |
| Factory Size: | Above 20000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Negotiated |
Send your message to us
12/15/18 Micron Metalized BOPP Film For Lamination
- Ref Price:
-
- Loading Port:
- Ningbo Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1*20'FCL m.t.
- Supply Capability:
- 700 Metric Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
