20 Microns Transparent BOPP Film
- Ref Price:
-
- Loading Port:
- Guangzhou Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 2 TONS m.t.
- Supply Capability:
- 100000 Tons Per Year m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of BOPP Film
BOPP protection film gloss and matte(basic film +EVA )ISO 9001: 2000 & SGS TEST JAPANESE TECHNOLOGY
First class in China
(1)Advantages :
Enhances the finished products' value through high transparent and supper gloss finish; prevents lamination from being pressed, bubbled and desquamate; protects from harmful substances and waterproof, making long life storage for the printings.
2) Available in various paper and inks, and suitable for lamination even with powder paper. After being treated with corona on the surface, it is good for spot UV and hot stamping.
3) Excellent cost saving as mixing of adhesive, coating and drying processes are not required. The operation doesn't ask for special technique and the film can be used in dry and wet laminator.
4) Environmental friendly, pollution-free working environment and recycle. No hazardous to health and secure to use as no toxic gases or volatile content is emitted.
(2)using conditions:
Compound temperature: 80-110(185-230F)
Compound presure :5-25mpa
Compound speed: 5-60m/min
(3)Application:
Laminated with printing object including books, magazines, pictures, catalogs, posters, leaflets;
shopping bags, outside coating for wrapping box for food, medicine, cosmetic,
gift packing, Costly Brochures,Catalogues ,Menu Cards,Mark sheet,Maps ,,Publicity Material etc .
(4)Certification & Quality:
ISO 9001: 2000 (Certifcate No.: Q09080185; Date of issure: 25 Jan, 2008) ;
SGS Quality Certification (free of Heavy Metal including Cadmium, Lead, Mercury, Hexavalent Chromium, Pbdes, No.: GZ0704056368/CHEM
TDS of the BOPP protection film:
BOPP protection film is most used in food ,tobacco packing and book printing ,let the surface is beautiful .
Specification Of BOPP Thermal Lamination Film | ||||||
Item | thickness(mic) | Ration/yield | resistance | |||
Type | total | tolerance | g/m2 | G/25MM | ||
17 | (+/-) 1.5mic | 15.68 | 560 | |||
Glossy | 22 | 20.37 | 570 | |||
25 | 22.65 | 580 | ||||
17 | 14.81 | 580 | ||||
Matt | 23 | 19.89 | 580 | |||
27 | 24.19 | 620 | ||||
Width | 200mm---1860mm (+/- 5mm) | |||||
length | 2000M, 3000M, 4000M, 6000M,9000M,12000M(200M,300M for 1'' core) | |||||
Paper core | (25.4mm)1'', (76mm)3'', 6'' | |||||
Connector | is less than 2 | |||||
corona treatment | Double side Surface tension | |||||
surface tension | BOPP side is more than 38dyne; EVA side is more than 52dyne | |||||
Application Manual | ||||||
Compound temperature | 80-110 C(185-230F) | |||||
Compound pressure | 5-25mpa | |||||
compound speed | 5-60m/min | |||||
(6)Notes:
This information given is based upon our knowledge and experience; and is given in good faith. It does not represent a guarantee or legal warranty for specific properties or for suitability for a specific use. Furthermore, we reserve the right for the technical innovation of the product
Information for production and package:
- Q:Will iron make any pollution when it is melted again?
- Plastic products are plastic particles or plastic powder heating melting molding. As to whether plastic bags are harmful to the human body, it depends on whether the raw materials and additives used to make plastic bags are harmful to human body
- Q:What is the corona treatment of plastic film?
- Process circuit form:The first form is in the production line of the film, which is commonly referred to as heat film treatment, which is the most common form of treatment. Because the polymer molecules have not yet completed the crystallization of the processing, and therefore the processing effect is strong, but generally only applies to immediately re processing (such as printing, coating or composite) film processing. The processing device is arranged behind the film cooling setting section and prior to the coiling device.The second form is on the film reprocessing line, which is commonly referred to as cold film treatment, and the quality of this process is also related to the experience of the film. If the film deposited after a long storage time, a large number of precipitated additives attached to the surface of the film, the quality of treatment will become worse. In this way, it should be noted whether the spark will cause the possibility of fire on the solvent used. The processing device is provided prior to the printing (or coating or compounding) device.The third form is the combination of the above two forms, which is first processed on the film production line, and then processed second times on the re processing line of the film. It is suitable for the first time to deal with poor quality, or after the first treatment, the storage time has been long, and the treatment effect has been dissipated by many films.
- Q:What kind of plastic film is a little sticky and can be affixed to the label perfectly? What is it like a sticker?
- I'm afraid you don't have that. The mucosa is not expensive. When you run out of it, throw it away and change it again.
- Q:Why should farmers cover plastic film when sowing in the spring?
- The film mulching can improve the soil and ground temperature and moisture status, to improve the soil temperature, soil water content, improve soil properties and improve soil nutrient status and fertilizer utilization rate, improve light conditions, reduce weeds and pests.
- Q:What are the LLDPE plastic films and what are the main uses?
- The properties of the resin are generally reflected in the melt index and density. The melt index reflects the average molecular weight of the resin and is mainly controlled by the reaction temperature. The average molecular weight has nothing to do with the molecular weight distribution (MWD). The influence of catalyst selection on MWD.The density is determined by the concentration of the comonomer in the polyethylene chain. The monomer density is used to control the number of short branches (whose length depends on the type of comonomer used) to control the resin density. The higher the concentration of comonomer, the lower the resin density.Structurally, LLDPE differs from LDPE in the number and type of branched chains, while high pressure LDPE has long branched chains, while linear LDPE has only short branched chains.Structurally, LLDPE differs only from HDPE in the number of short branches. HDPE has fewer short branched chains and therefore is of higher density.The physical properties of LLDPE are controlled by its molecular weight, MWD, and density.
- Q:What are the plastic film types and scope of use?
- Nylon film is a very tough film, good transparency, good gloss, tensile strength, high tensile strength, but also has good heat resistance, cold resistance, oil resistance and organic solvent resistance, wear resistance, puncture resistance and excellent, relatively soft, excellent oxygen barrier, but the water vapor barrier is poor, moisture absorption, moisture permeability is larger, the heat sealing is poor, suitable for packaging rigid items, such as greasy food, meat, fried food, vacuum packing food, cooking food etc..
- Q:How to remove the plastic film on the steel door?
- If it's a new door, just tear it down directly.
- Q:Rigid plastic film problems
- Many PE film data, there are many PE film and printing bag friends, many of them are in the forefront of the operator, responsible for technology. Liquid has many PE particles, including low density, metallocene, linear and so on
- Q:Is the foundation covered with film or damp proof powder?
- 1, I do not know what is the principle of moistureproof powder?. It is estimated that it is additive. But not added to mortar, doubt the function.2, the film will be better, but the follow-up construction is easy to damage, durability is limited, it is better to do a waterproof.3, on the foundation moistureproof, equal to did not do. It is no use crossing a block of water in the middle of the pool. Damp proof should be done below ground level.4, I don't think the film is better than the traditional damp proof layer. Can the height on the ground, construction (brick), can play a role of natural moisture barrier; or on the ground part of the wall construction waterproof isolation layer.
- Q:Can the plastic film on the lens of the swimming mirror be removed?
- This film is useless, you can tear off, this film is in use when anti mirror grinding, so it is useless. Because the goggles around the water cooler, the air inside the goggles easily in the goggles on the inner wall is condensed into water and fog.
1. Manufacturer Overview |
|
|---|---|
| Location | Zhejiang, China |
| Year Established | 2009 |
| Annual Output Value | Above US$ 10 Million |
| Main Markets | North America; South America; Eastern Europe; Southeast Asia; Africa; Oceania; Mid East;Eastern Asia; Western Europe; Central America; |
| Company Certifications | ISO 9001:2000 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Wenzhou Port |
| Export Percentage | 81% - 90% |
| No.of Employees in Trade Department | Above 10 People |
| Language Spoken: | English; Chinese; |
| b)Factory Information | |
| Factory Size: | Above 10,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | Design Service Offered; Buyer Label Offered |
| Product Price Range | High;Average |
Send your message to us
20 Microns Transparent BOPP Film
- Ref Price:
-
- Loading Port:
- Guangzhou Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 2 TONS m.t.
- Supply Capability:
- 100000 Tons Per Year m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
