18/20/25/30 Micron Silver Metalized CPP Film With High Quality
- Ref Price:
-
- Loading Port:
- Ningbo Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 3 Metric Tons m.t.
- Supply Capability:
- 700 Metric Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification Of Heat Sealing Property Metalized CPP Film From China
Thickness of film | Thickness of aluminum layer | Width | Diameter | Core size |
18，20，25，30μm | 350-380Å | ≤2320mm | ≤800mm | 76mm(3″)152mm(6″) |
Features Of Heat Sealing Property Metalized CPP Film From China
1 Good adhesion, well proportioned,
2 Heat sealing property
3.The film with heat sealing property, which can be laminated with BOPP,PET using for convention, it is extensively using for packaging industry.
Technical Data Of Heat Sealing Property Metalized CPP Film From China
Item | Unit | Standard value | Test method | |
Thickness of film | μm | 25 | ASTM D-374 | |
Tensile Strength | MD | Mpa | 54 | ASTM D-882 |
TD | 33 | |||
Elongation | MD | % | 565 | ASTM D-882 |
TD | 612 | |||
Heat seal strength | N/15mm | 11.2 | ASTM D-882 | |
Wetting Tension | mN/m | 38 | ASTM D-2578 | |
Friction Coefficient | —— | 0.62 | ASTM D-1894 | |
Haze | % | 2.7 | ASTM D-1003 | |
Glossiness | % | —— | ASTM D-2457 | |
Thickness of Aluminum Layer | Å | 380 | ||
(Square resistance)Ω/□ | 2.7 | GB/T 15717 | ||
(Optical density )O.D | 1.9 | X·Rite361 | ||
(Light transmittance)VLT | 1 | ASTM D 1746 | ||
Equality Tolerance of Metallizing Layer | % | ±10 | GB/T 15717 | |
Combining Fastness Tolerance of Metallizing Layer | % | Aluminum fall off ﹤2 | 3Madhesive tape | |
Moisture vapor transmission rate | g/m2·24hr | 0.5 | ASTM E96 | |
Oxygen transmission rat (23℃,0%RH) | cm3/m2·1atm·24hr | 45 | ASTM D1434 | |
Pictures Of Heat Sealing Property Metalized CPP Film From China
- Q: What is the impact of TPO waterproofing membrane welding performance?
- Dow Chemical TPO and Basel TPO due to the different grades of production technology, raw material ratio is different from the formula system for the performance of the material melting point, polymerization, molecular weight distribution index, melt index, melt strength, weldability are not same. It is recommended that attention be given to the above factors in the course of the test
- Q: Waterproof electrode, waterproof welding
- 3, the more the more welding when the weld, the better the location, until the leak attributed to a little. At this time according to the size of the overflow pressure can be used in different ways: 1, with a tap into the cone of the welding plug, such as holes, temporarily blocked the hole, and then welding. 2, if the hole small, but the water more urgent. At this time may wish to elongate the arc, the use of electric home hot hole around the baked, the use of peripheral metal heat expansion, temporary swelling of the pores or simply hammer the hole immediately after the welding. Require this spot welding to be quick and accurate. When the droplets will be blocked after the hole, immediately off the arc. Action to be fast, so that the droplets have been blocked quickly cooled and completed welding. If the arc is too slow, then the back of the droplets have been re-melting, re-blowing under pressure. To be a little at the hole after the cooling, according to the need for re-welding.
- Q: Surfacing isolation layer is the application of what, how to achieve surfacing isolation layer weld.
- The surfacing isolation layer is mainly used to separate the main surfacing layer from the base metal, especially when the surfacing layer is welded directly to the base material. It is usually used with the third component, but with the surfacing layer and Base metal can be a good fusion of metal welding consumables, in the surfacing surface of the first welding a layer, and then on this basis and then need to re-welding the metal.
1. Manufacturer Overview
| Location | Zhejiang, China |
| Year Established | 1996 |
| Annual Output Value | Above 1.0 Billion RMB |
| Main Markets | Europe; North America; Middle East; Southeast Asia |
| Company Certifications | ISO 9001 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Ningbo; Shanghai |
| Export Percentage | 30% - 40% |
| No.of Employees in Trade Department | 6-10 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 20000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Negotiated |
Send your message to us
18/20/25/30 Micron Silver Metalized CPP Film With High Quality
- Ref Price:
-
- Loading Port:
- Ningbo Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 3 Metric Tons m.t.
- Supply Capability:
- 700 Metric Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
