Woven belt with normal edge, Woven belt with Kevlar edge, Needle belt with reinforced edge
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths.
Corrugator belts Inwoven Aramid Edge -Features
Suitable as top belt with high speed (above 150 m/min) production
Heat and super tear resistance
Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime.
Particularly for frequent changes of board width
Mostly used for all Corrugating Production Lines.
Corrugator belts Inwoven Aramid Edge- Specification
Product | Corrugator Belt Inwoven Aramid Edge |
Thickness | 8mm-10mm |
Width range | 1000mm - 3200mm |
Length | 80 meters |
Heat-resistance | 240℃ (the kevlar edge upto 350℃) |
Tensile strength | 70Mpa |
Coefficient of friction | ≥ 0.40µ |
Weight per unit | (7.5±0.3)kg/㎡ |
Air-permeability 40mm water Column | 2.0m³/㎡ min |
Seam | Hot JAW lacing/Clipper with rubber coated |
Edge | 100mm or 200mm inwoven aramid edge reinforcement (kevlar) |
Suitable position | Top belt |
Lifetime | 50-70 million meter |
Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise | |
Corrugator Belts with Silicone Coating Technical Parameters
Product | High Speed Corrugator Belt |
Thickness | 9mm |
Width range | 1400mm - 3200mm |
Length | 80 meters |
Heat-resistance | 240ºC (the kevlar edge upto 350ºC) |
Tensile strength | 70Mpa |
Coefficient of friction | ≥ 0.40µ |
Weight per unit | (7.5±0.3)kg/m2 |
Air-permeability 40mm water Column | 2.0m³/m2/min |
Seam | Hot JAW lacing/Clipper with rubber coated |
Edge | 100mm -400mm inwoven aramid edge reinforcement (kevlar) |
Suitable position | Top belt,Bottom belt,Upper belt ,Lower belt |
- Q: Hello, I just do packaging machinery, foreign trade, I do not know how to search customers ah.For example, our products have machines that can pack candy and cookies. Do you want to search for candy or biscuit manufacturers and then recommend them to our products? These candy manufacturers search through the Internet to recommend, the effect is good?
- If you have your own website here, through the optimization and promotion, to promote their products out, the customer concern, love content search, when people search through GG to see your home site, you may consult. There are many ways
- Q: The role of packaging equipment in packaging equipment
- Packaging is the necessary condition for products to enter the circulation field, and the main means of packaging is the use of packaging machinery. With the development of the times and the progress of technology, packaging equipment is playing a more and more important role in the field of packaging. The main functions of packaging equipment are as follows:
- Q: What's the best place to use the pillow type packing machine?
- This device is now relatively mature technology, but each manufacturer's design is still a little different
- Q: How much is the tableware wrapping machine?What's the price of the tableware wrapping machine?
- Tableware packing machine? Should the packing of the tableware be contracted? Tak Cheung packing machinery, automatic heat shrinkable tableware packing machine can be considered
- Q: How is the production and characteristics of ceramic wall tiles different from the size and performance of molding?
- What is the production process of ceramic wall and floor tiles? What are the characteristics of the powders produced by spray drying?The tiles and other ceramic raw materials is similar to inorganic non-metallic materials (mainly silicate) as the main raw material, through accurate mixing processing, according to certain technology and shape the final firing. Significant features of the product shape are the rule of Fu Banzhuang, and most of the semi dry pressing method, and therefore suitable for automatic production line of raw materials 4 ingredients of crude, water, 4 fine granulation molding - burning glaze, glaze firing and assembly of I (paving) pick - packagingThere are different granulation methods in different production processes. The former is to dehydrate the mud and then dip it into the mud or directly with mud cake. The equipment has small investment, easy installation, operation and maintenance, irregular particle shape, uneven thickness and poor flowability. The I drying tower of the spray drying machine directly prepared the slurry into powder, which has high powder making efficiency and good powder flowability, and is the most ideal automatic powder powder making system at present. When the powder made from spray drying tower is pressed to wall and floor tile, the billet handle can be increased by about 30%.
- Q: What is the delay time of the packer's cross sealing?
- The sealing time is how long the delay is when the sealing dies are joined together.
- Q: What's the fastest packing machine?
- 3 ideal speed of the package can reach 70 packs, that is, 70*3 = 210., and now there are 4 packages abroad. But the bags are small.
- Q: Energy saving reform of packaging machine
- Due to the adoption of variable frequency speed regulation, the chain drive is greatly reduced, the stability and reliability of the operation of the machine are improved, and the noise of the machine operation is reduced. It guarantees the high efficiency, low loss and automatic detection of the packaging machine. It has both a beautiful and fashionable appearance, and a healthy and smart mind.Although the transmission system used in food packaging machine is relatively simple, it has higher requirements for the dynamic performance of the transmission. The system requires fast dynamic follow-up performance and high stability speed accuracy. Therefore, we must consider the dynamic technical indicators of inverters, and select high-performance inverter to meet the requirements.
- Q: Will the Internet be too passive? Telephone marketing, what kind of food can be found in the factory, such as the phone, people basically do not need, and all have. Does the salesman run the market? How do you run? Thanks for the direction...
- (especially the telephone communication, stop talking no worries) I think you should understand the specific situation, your target customers first, for example: mechanical models currently in use and the time of purchase, production efficiency, what will be improved after the replacement, can recover the cost of even a few years, these are all what you should do in advance homework.
- Q: Calendering, extrusion, blow molding, pressing, plastic (vacuum forming) and what is the rotational molding
- Plastic forming and processing methodPlastic molding is an engineering technology, involves the plastic into all kinds of plastic products in the process. The transformation process tends to happen in one or more of the following conditions, such as polymer rheology and physical and chemical properties of the change.
Send your message to us
Woven belt with normal edge, Woven belt with Kevlar edge, Needle belt with reinforced edge
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
