Tower Crane TC7135 Construction Equipment Building Machinery Distributor Sales
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 5 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Tower Crane TC7135 Description:
1.CMAX Tower Crane TC7135 is one of the main product of CNBM company, which have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition.
2. Tower Crane TC7135 can adopts standard section hydraulic lifting and connecting, and can decide the crane height according to the actual height of the building, and at the same time the lifting capacity will not be affected.
3. Tower Crane TC7135 has high working speed, good speed-adjusting performance, steady operation and high efficiency. Three-speed motor and mono-speed ratio decelerator are applied in the lifting struction, which enables heavy load low speed and light load high speed.
4.Tower Crane TC7135 has complete set of safety devices, which can guarantee the safe and high efficienct operation of the equipment. The machine is equipped with lifting height limiter, dolly range-change limiter, moment limiter,weightlimiter,circumgyrating limiter,and so on.
5.Tower Crane TC7135 has scientific layout and beautiful appearance. The operator's room is set independently on one side, with good vision field. It creates a good working environment for the operato.
Tower Crane TC7135 Parameter:
Max. working range 71m, tip lifting weight 3.5T and Max. lifting weight 16T.
Hoisting mechanism fitted with three speed motor, stable braking and less shock when shifting.
Trolleying mechanism can provide two operation speeds.
Free standing height (m) 50
Max height with attachment (m) 200
Working range can be adjusted (m) 50、55、60、65、71
Min working range (m) 2.5
Max lifting capacity (t) 16
Tip load @ 50m (t) 3.5
Tower Crane TC7135 Packaging & Delivery:
40HQ container
20~25days after deposit
Tower Crane TC7135 Diagram:
Tower Crane TC7135 Technical Sheet:
Tower Crane TC7135 FAQ:
1.What is tower crane?
Tower crane is a modern form of balance crane that consist of the same basic parts. Fixed to the ground on a concrete foundation (and sometimes attached to the sides of structures as well), tower cranes often give the best combination of height and lifting capacity and are used in the construction site.
2. What is the meaning of the tower crane’s code?
Take Tower Crane TC7135 for example, the first two letters “TC” means Tower Crane, “71”means jib length is 71 meter, and the last two letter “35” means the tip load is :3.5 ton.
3. What is the principal to quote the right tower crane to the client?
First, we need to know clients’ requirements,for example, max lifting capacity, height, tip load and jib length.. Second, we need to know what the foundation requirement from the client is and Third if there are special needs. CNBM could suggest proposal according to clear data provided by the clients.
- Q: I have a vessel 40 feet off the ground in a platform, and the crane can get to within 30 feet of it (from the side). I'm more curious of the process for sizing them though.
- It okorder and view some of the product guides and review the performance data and load charts. It also depends on what type of support soil or foundation that is capable of supporting the crane.
- Q: what do you mean by a detente ball in the crane of a revolver?
- And this impacts the game of golf how? and what is a crane of a revolver.
- Q: What type of tower crane does not include tower crane in variable amplitude mode?
- Mobile tower crane: a tower crane with running device and can walk.
- Q: Is the working load of a crane the maximum weight it is able to lift?
- Usually there is a safety factor of 400% built into all engineered cranes. This is to account for unforeseen momentary spike loads, operator errors and component weaknesses ( (chipped tooth or poor forged parts or chains, etc) This is to take into account shock loads, for instance if you were picking up a bundle of steel bars and the load shifted and the bars dropped a foot or so the momentary load on the crane spikes. Working load is basically the load the crane is designed to run all day long at. If you run at the design load the crane is covered under the manufacturer's guarantee against defects and the maker is liable for problems or failures associated with the crane. But for example if the manufacturer can demonstrate you were picking up a 5 ton load on a regular basis with a crane rated at 3 tons, the manufacturer's liability is negated. Since you can counterweight any crane enough to theoretically lift anything, most of the cranes that have electric motors actually will stall if you lift much over the design weight. In other words in the above crane if you try to pick up 5 tons with a 3 ton crane, the motor will not have enough horsepower to pick up the weight and the motor will simply not lift it. The actual overload factor built into a crane is usually to contend with those shock loads and defective or weak components not seen.
- Q: How many meters does the tower crane installation height require expert proof?
- The installation, disassembly and jacking of tower cranes must be carried out by experts
- Q: because i have this huge sofa i need to get to 2nd floor but i cant coz the staircase is too small
- Talk to a lumber yard that has a boom truck. Ask them how much to do it. A boom truck will cost much less than a crane. A boom truck can reach 45 to 50 feet. In this economy they are looking for anything they can get. They will most likely do it. But when really busy they wont. But things are slow. Builder 30 years. A crane will cost about 250.00 of the first hour. with a one hour min.
- Q: I'm getting a tattoo of a paper crane in about 2 weeks because to me it symbolizes creativity and an artistic talent. I dont want it to look like any other paper crane tattoo though and I have been having issues coming up with a small design to add into the tattoo. I have always loved art but will unfortunately will not be continuing my education of it because it is very difficult to get a job in the art field.All in all, i'm looking for help for adding a design in the paper crane tattoo that will represent the artist that I am.
- Hey okorder / I reckon the Japanese tradition would really suit this style because of the crane is a Japanese form of art. I do give you permission to print out this piece and work with it as this is only a basic sketch and ive stuffed up a lot of the detail as I forgot it would be easier for you with just an outline also the top flower may need re-doing. I hoped I helped.
- Q: how a tower crane for a high rise building construction is erected?
- Depends on the type - if the building is not that tall, the tower crane could be built by any taller crane (either a mobile one or an existing one on the site). If the building is very tall, a self-erecting crane is usually used; this type has a sort of jack mechanism somewhere in the tower (usually near the bottom), so as it is needed, the existing tower can be lifted, and another tower section is inserted to raise the entire structure, repeating the process as needed as the structure the crane is building gets taller (thus, the crane is building itself as it goes along).
- Q: I'm not sure how to set this problem up. Any help would be greatly appreciated. Thank you :)
- We start using by defining mechanical Power: = P=Work/time What is the work here? We lift the box a given distance. Work=mgh Since we know the power of the crane, we can simply plug in the values and solve for t: t=mgh/P This is only true if the crane has a constant power, which seems to be the case LeSmartOne
- Q: I want to make a sculpture out of 1,000 paper cranes. I have sometime to work on it, but not months. Has anyone ever known someone to do this, or done this themselves? How much time should I allow for such a project?
- Do one and time it, then multiply by 1000. Subtract some time because you will get faster from experience.
Send your message to us
Tower Crane TC7135 Construction Equipment Building Machinery Distributor Sales
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 5 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
