Thickness 20mm Polycarbonate Sheet Polycarbonate Embossed Sheet
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
Material | 100% virgin bayer or sabic |
Color | Clear, Lake blue, Opal ,green,yellow, ect. |
Thickness | 1.2-15mm |
Max width | 2100mm(can be customized) |
Length | 5800mm,12000mm,11800mm,6000mm or can be customized. |
Warranty | Usually 10 year's quality guarantee which depends on the models you ordered. |
Product Description
Item Name | polycarbonate solid sheet | Specific gravity | 1.25 |
Material | polycarbonate | Application Temperature | -40 °C ~+120 °C |
regular Size | 1220*2440mm | Impact Strength | 850J/m |
regular Thickness | 1-15mm | Light transmission | 88% |
Color | transparent/clear | Heat Conductivity | 2.3-3.9 W/ m2°C |
Application scope of Polycarbonate solid sheet
1. roofing for swimming pool, shopping malls, commercial streets
2. sunshade for stadiums and bus stops, gazebo, open air carport
2. lighting canopy for corridors, passages and subway entries
3. flashing for bank ATMs, telephone box, gateways, garages
4. sound and heat insulation wall for expressways and houses
5. instead of glass, decorati
Characteristics of Polycarbonate solid sheet
1. Light Transmission:The light transmission reaches 12% to 82%, depending upon color and thickness. It will not get yellow, atomization, and poor transmittance. Light transmission loss only 6% after ten years.
2. Impact Resistance: Its impact strength is 250-300 times of ordinary glass, 30 times of acrylic plate with the equivalent thickness, and 2-20 times of tempered glass. It would not crack after falling down two meters with a 3KGhammer hit, known as "unbroken glass" and "ring of steel".
3. Light Weight: Only half weight of the glass, saving the costs of transportation, unloading, installation, and supporting frame
4. Fire Retardancy: Fire Retardancy grade B1 decided by the national GB8624-97 test, without fire drop nor poisonous gas. The flaming point is 580 ° C. It‘s features self-extinguishing away from fire, no toxic gases made when burned and it do not contribute to the spread of fire.
5. Weather Ability: It has good weather ability, can maintain excellent propertities in a wide temperature range from -40 ° C~120 ° C, short-term bearing temperature allow-100 ℃ ~ + 135 ℃. Low temperature brittleness of -100 ℃, high temperature softening temperature of 146 ℃.
- Q:Where the PC stamina board and the sun board sell more price is also cheaper
- Not the cheapest, only cheaper, but the life is slightly shorter.
- Q:What is the difference between sun panels and lighting panels?
- Construction and waterproofing As the FRP lighting board can be customized according to the needs of exactly the cross-section, so the installation only a small amount of self-tapping screws and silicone tape can be, so easy installation, fast and low cost, good water resistance. As the PC board is based on the main plate, with the corresponding PC and aluminum alloy parts, can play a good connection. And because the PC sunshine board technology, length and thickness can be customized according to customer requirements, is very conducive to the installation and construction of the project.
- Q:PC board greenhouses pc board generally use thick? What is the price? What about the current market price? Is the sun board a PC board?
- PC board greenhouse greenhouse generally refers to the sun board greenhouse shed, because the greenhouse shed with more use of PC sun panels, compared with the general 8-10MM, the cost of solid PC stamina cheaper than the price is calculated in accordance with ㎡, now The price of the market is about 40 square meters.
- Q:Sunshine board can be used in what areas
- Sunshine board model: Now the market is mainly two layers of sunshine board 4-12mm thick, 8-16mm honeycomb-type sun panels, 12-18mm meters-shaped sun panels, 18-30mm meters-shaped sun panels.
- Q:Which friends know how to remove the plastic film on the sun?
- In the PC sun panels and accessories installed when fixed, it is best to tear the protective film 30mm to 50mm, this is to avoid the accessories to suppress the protective film pressure. But should pay attention to is not too much to expose, or easy to install the operation because of scratching the sun plate.
- Q:Can the sun board cover the bedroom?
- is allowed. Insulation: Insulation performance is 40% to 60% higher than glass of the same thickness. Fire resistance: to GB8624 flame retardant level (B1 level) standard. Light weight: the proportion of only the general glass 1/12, and not easy to crush, handling installation time and effort, especially for tall buildings. Easy processing: bending radius up to 175 times the thickness of the plate, suitable for processing a variety of shapes. Greenhouse board energy saving: sun panels have lower than ordinary glass and other plastic thermal conductivity (K value), so that greatly reduce the heat loss, for heating equipment, construction, environmentally friendly materials. Greenhouse Anti-condensation: Under normal circumstances, when the outdoor temperature is 0 ℃, the indoor temperature is 23 ℃, as long as the indoor humidity is less than 80%, the surface of the material will not be condensed.
- Q:Sunny plate that is a transparent that I want to use the home screen 4mm thickness can be about how much a square
- The sunboard is hollow and not suitable for the screen. You can choose particle board or frosted board, with different colors can bring unneeded effect
- Q:What are the differences between plastic endurance boards and sun panels?
- PC board in two kinds - solid for the endurance board, hollow for the hollow board or sun panels.
- Q:How to correctly identify the quality of pc sunshine board and pc durability plate method
- Pull the protective film to see the sheet. Particles or bubbles are relatively small or relatively small, indicating that the recovery of raw materials, but is a good back to the material, this board is the middle grade plate. Such as bubbles and particles more or larger, indicating that the poor raw material, this board is a low-grade plate. If the civilian particles or particles rarely, that the quality of the sun plate is very good, is ten years of quality.
- Q:What is the difference between PC stamina and PC sunboard?
- The easiest way to do this is to compare one or more of the sun panels with the stamina. The difference is obvious, from the structural distinction, PC sun panels have a single layer, double, and even multi-layer and is hollow. PC Nai Liban is single layer solid. From the weight of the distinction, because the sun is hollow, the material is relatively small, so the same thickness and area of the endurance plate much heavier than the sun.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Thickness 20mm Polycarbonate Sheet Polycarbonate Embossed Sheet
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
