Stainless Steel Sanitary Fitting Plane End Reducer 42x28mm M Profile 304
- Loading Port:
- Huangpu
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
WELCOME to visit our stainless steel pipeline products here(^_^)
Press fitting system joins pipe without welding or bolting. The components fit by crimping through the use of a special pressing tool. An O-ring that is inserted in the fitting ends of the pipe ensures a leak-proof connection. Press fitting system is the trend of pipeline industry. It is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc.
For the size, now we have 3 series:
1. Out diameters: 16.0, 20.0, 25.4, 32.0, 40.0, 50.8, 63.5, 76.1, 88.9, 108.0 (GB/T 19228.2-2011)
2. Out diameters: 15.88, 22.22, 28.58, 34.0, 42.7, 48.6, 76.1, 88.9, 101.6 (JIS G3448-1980)
3. Out diameters: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 (EN 10312:2002)
Technical information:
-- Material: Stainless steel 304 and 316L available.
-- Max working pressure 1.6MPa (equal to 232 psi), testing water pressure: 2.5MPa (equal to 362.5psi).
-- Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring),
-- Suit medium: Cold water, hot water, compressed air, gas, oil etc
The product features as below:
1, thin wall stainless steel pipe could last for 70 years, it is the same life time with normal buildings.
2, no smell, no rusty.
3, recycle material
4, avoid welding, avoid fire dangerous.
Contact us for more details!
- Q: I'm still in the process of getting used to an electric stove. I'm planning on frying meatballs in canola oil and I'm wondering what heat setting I should use. I need it to be hot enough to actually cook the ground beef but not too hot because our smoke detectors are super sensitive. Thanks!
- Whose owns the smoke detectors? Where are you? If you OWN the residence, you are probably not even required to HAVE smoke detectors. In that case, you can do anything you want tot them. If you rent an apartment, or the detectors are not in your residence, you could be guilty of destruction of property ans potential liable for any injuries resulting from the detectors not working.
- Q: When lightning strikes the ocean why don't all the fish die?
- cut out joint and replace with shark bitefittings.easy to install,they just slide on pipe.
- Q: G1/8 "pipe joint end special sealing WD-B02 is what mean
- The sealing effect is better than the traditional O ring. The elastomeric seals are used as axial static seals for threaded oil and screw ends, and the cross section remains almost constant at high pressure.
- Q: How long the battery last on the phone? Give me your reviews
- They might make you retake it if you were out there for a long time, but a few minutes really won't mean anything. You teachers should have instructed you not to talk at all while outside. They might do an investigation, but I doubt they would make you retake it unless many people complained.
- Q: okay. i just recently started masturbating. and i've only been using my finger but, once ur finger is in ur vagina, what do u do next? no rude comments, pleasethanks, and happy holidays!
- I go with Shannon on the blood tests. This sounds like equine ME which has affected our dressage horses at one time or another over the years. It is a post viral syndrome and can last YEARS if not treated. If he used to be a dressage horse then he used to have energy. Once you have seen to the bloods and if needed put him on a blood tonic like RedCell. you ought to see an improvement. Also check he has no stifle pain. We have a horse with stifle problems and he will not go forward. He is about to become a field decoration as the treatment only worked for three months, so early detection is key to the problem. If all vet checks are clear then ask someone to ride him for you to see if he is more responsive to a stronger/taller/more experienced rider or not. Finally, I wonder why he was not worked for 5 years?? That answer may well give you the reason for your horses lack of oomph.
- Q: Is the trachea connected directly to the inside and outside threads? I remember a sealing ring
- This problem is too abstract. There are several cases: 1:, if the pipe thread (G, NPT, BSP), only need to use raw tape or liquid TEFLON coated, tighten can be. 2: some joints are sealed by the cone. Sealed by a cone (of a ferrule); some have O rings, others are straight. You can find it on PARKER's product samples. 3: some joints are screwed with M thread. Seal by type O ring or copper gasket. Go to the FESTO, SMC site and find the M connector. 4: there are other types of fast joints. There are too many kinds.
- Q: just curious the difference between an alarm on/off button and a panic button?
- That music is talked approximately as Low via Flo Rida i've got faith. Starstrukk via 30H!3, merely Dance via woman Gaga, this isn't any longer My call via The ting Tings, Tik Tok via Ke$ha, warm and chilly via Katy Perry, secret via Micheal Jackson, right around via Flo Rida, party in the US via Miley Cyrus. Sorry this is all i'm able to think of roughly immediately. yet once you're making plans music for a college dance then please for each and all the folk that be attentive to solid music which would be going, do no longer in straightforward terms play stuff like Low. i be attentive to i does no longer pass to my college dances if there wasn't slightly Micheal, Madonna, and Gaga!
- Q: My ultimate favorite breed of horse is a Lusitano. im a HUGE dressage girl and really wants to (down the road) get a lusitano stud for dressage. yes there are plenty out there so finding one isnt the problem, neither is the price. i want a highly trained dressage horse. first of all are lusitano horses pretty hot?? and arent they known for the Roman nose?? i LOVE the ROMAN NOSE. any ways what do you think of the Lusitano?
- The water supply pipes are likely enclosed in the wall. You will have to cut a big enough hole through thr plaster to work on thr pipes. You should only have to tap into the hot water suppy and waste for a dishwasher. If you encounter galvanized pipes you will need pipe cutters and possibly threading tools to tap into the pipe? Check with Home Hardware or Home Depot for possible adaptors for tapping into galvanized pipe by just drilling a hole in them and clamping on a T connector. There are many new adaptors that make working on old plumbing simpler.
- Q: bullet travel in the water before it becomes harmless to the person in the water.
- what's a side cross? if you describe i can make
- Q: How was the pipe joint named?
- Use the end extension of the pipe for sealing without any other seals. The utility model has simple structure and is suitable for the connection of thin-wall pipe fittings, and is suitable for pipelines with low pressure of oil and gas as medium. The pressure is allowed to be used in table 41, table 27~41, GB5625.1 to 5653-1985Insert welded pipe jointThe length of the tube will need to be inserted into the pipe joints and pipe end until the connector end of the contact, the pipe and the pipe joint are welded together, can save over, but the pipe size is strictly applicable to oil and gas as the medium pipeline system table 43 ~ 49 JB3878-1985Cone seal welded pipe jointOne end of the connecting pipe is provided with an outer cone surface, and a O shape sealing ring is matched with the inner cone surface of the joint body, and is screwed with the screw thread. The working pressure is 16 ~ 31.5MPa, the temperature - 25 to 80 DEG C for oil as medium piping system table 50 ~ 62 JB/T6381 ~ 6385-1992Withhold hose connectorThe installation is convenient, but a tightening process is added. After the hose is damaged, the joint coat can not be reused, and it is made up of a steel wire braided hose. The utility model can be connected with a welding pipe joint sealed with a O ring. Pipeline system suitable for oil, water and gas as medium. Medium temperature: Oil: -30 ~ 80 degrees Celsius; air -30 to 50 degrees Celsius; water below 80 degrees JB/ZQ4427 ~ 4428-1986
Send your message to us
Stainless Steel Sanitary Fitting Plane End Reducer 42x28mm M Profile 304
- Loading Port:
- Huangpu
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords