Seal Seals O seals NR O ring NR O seal gasket NR seal NR gasket
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Silicone O Ring,Viton O Ring,Rubber O Ring
1.Mould:More 5000
2.Best price and high quality
3.Certificate:ISO9001-2000,TS16969
| NR O ring. Abbreviation:NR Common name:Nature Rubber ASTM D-2000 classification:AA Military(Mil-Std417) :RN Chemical Definition :polyisoprene Durometer-Range (Shore A) :20-90 Tensile Range (P.S.I) :500-3500 Elongation (Max.%) :700 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F:-20° to -60° High Temperature Usage (°F) :to 175° Aging Weather-Sunlight:Poor Adhesion To Metals: Excellent Usual Hardness range:35-80 shore A |
|
Viton O ring.
Abbreviation :FKM
Common Name :Fluoro Elastomers
ASTM D-2000 classification:HK
Military(Mil-Std417) :MIL=R-25897/MIL-R-83248
Chemical Definition :Fluorinated Hydrocarbon
Durometer-Range (Shore A) :60-90
Tensile Range (P.S.I) :500-2000
Elongation (Max.%) :300
Compression Set:Good
Resilience-Rebound:Fair
Abrasion Resistance:Good
Tear Resistance:Good
Solvent Resistance:Excellent
Oil Resistance:Excellent
Low Temperature Usage (°F:+10° to -10°
High Temperature Usage (°F) :400° to 600° (depending on time and service condition)
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Advantage:
1. Heat resistance up to 600°F
2. Resistance to wide range of oils and solvents; specially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils.
Disadvantage:
1. Not recommended for ketones, low molecular weight esters and nitro containing compounds.
Usage:
Automobile,motorcycle,diesel engine,and fuel system
Silicone O ring. Abbreviation :silicone ASTM D-2000 classification:FC,FE,CE Military(Mil-Std417) :TA Chemical Definition :polysiloxane Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :200-1500 Elongation (Max.%) :700 Compression Set:Good Resilience- Rebound:Good Abrasion Resistance:Fair to poor Tear Resistance:poor Solvent Resistance:poor Oil Resistance:Fair to poor Low Temperature Usage (°F:-60° to -150° High Temperature Usage (°F) :450° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Advantage: 1.after modulating formula, the tensile strength up to 1500 psi, and tear resistance up to 88 LBS. 2.Good elasticity and good compression deformation. 3.good resistance to neutral solvent. 4.excellent heat resistance. 5.With excellent cold resistance. 6.with excellent resistance to erosion of ozone and oxides . Disadvantage: 1.Does not recommend is suitable for most concentrated solvent, oil, concentrated acid after dilute sodium hydroxide Usage: Appliance:electric kettle,electric iron,Microwave owen,etc
Keypad,heat shock in DVD,cable connector
|  |
| NBR O ring. Abbreviation: NBR Common Name:Buna N, Nitrile, NBR Chemical Definition:Butadiene Acrylonitrile General Characteristics:Waterproof,oilproof Durometer-Range (Shore A):20-95 Tensile Range (P.S.I):200-3000 Elongation (Max.%):600 Compression Set:Good Resilience-Rebound:Good Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Good to Excellent Oil Resistance:Good to Excellent Low Temperature Usage (°F):-30° to - 40° High Temperature Usage (°F):to 250° Aging Weather-Sunlight:Poor Adhesion To Metals:Good to Excellent Usual Hardness range:50-90 shore A Advantage: 1. Has good solvent, oil, water and hydraulic fluid resistance. 2. Good compression set, abrasion resistance and tensile strength. Disadvantage: 1. Not recommended for using in highly polar solvents such as acetone, and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons. Usage: fuel tank, grease-box, hydraulic, gasoline, water, silicone oil, etc |
HNBR O ring. Abbreviation:HNBR Common Name:HNBR Chemical Definition:Hydrogenated AcrylonitrileButadiene General Characteristics:abrasion, compression set, tensiles Durometer-Range (Shore A) :50-90 Tensile Range (P.S.I) :2600 Elongation (Max.%):530 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Good Oil Resistance:Excellent Low Temperature Usage (°F) :-65° to 250° High Temperature Usage (°F) :to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Usual Hardness range:60-80 shore A Usage: Fridge,automobile engine,etc |  |
| EPDM O ring. Abbreviation:EPDM Common Name:EPR, EPT, EPDM ASTM D-2000 classification:CA Military(Mil-Std417) :RS Chemical Definition:Ethylene Propylene Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :500-2500 Elongation (Max.%) :600 Compression Set :Good Resilience-Rebound :Good Abrasion Resistance:Good Tear Resistance:Fair Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F) :-20° to 60° High Temperature Usage (°F):to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Fair to Good Usual Hardness range:50-90 shore A Usage: Sanitary ware; brake; radiator |
Neoprene O ring. Abbreviation :Neoprene ASTM D-2000 classification:BC,BE Military(Mil-Std417):SC Chemical Definition :polychloroprene Durometer-Range (Shore A) :20-95 Tensile Range (P.S.I) :500-3000 Elongation (Max.%) :600 Compression Set:Good Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Fair Oil Resistance:Fair Low Temperature Usage (°F:+10° to -50° High Temperature Usage (°F) :to 225° Aging Weather- Sunlight:Good Adhesion To Metals:Good to Excellent Usal Hardness range:50-90 shore A |  |
- Q: The engine cover, or valve cover, cylinder head cover, the cover is the engine.This is my graduation project... The NASTRAN is used, but the rest of the software is basically the same.Hope to have experienced master Zhidianmijin ah.At present, only 12 order free modal analysis is performed. The final is to do static strength, sealing. The details of the process are not clear. For example, how does the bolt hole bind? Does it hold all the points on the inside surface? What about the boundary conditions and loading? It has more than ten bolt holes, one ring gasket, and 120 0.7bar pressure inside. The material is engineering plastics.Or some people know the whole process from modeling to the results of the general steps to say, you can, thank you first. OK, add more. StopFrequency response and transient response are currently being done
- Such a professional problem, or experts answer better.
- Q: Gasket material? The role of materials?
- Asbestos. Asbestos material has two kinds: wet asbestos and blue asbestos. Wet asbestos, heat resistance, good alkali resistance, high tensile strength, acid resistant performance is poor, the majority of asbestos rubber plate made from it; not only blue asbestos, good heat resistance, and acid resistance is also very good, so it is used in the manufacture of acid resistant asbestos rubber sheet. The normal use temperature of asbestos board is below 550 degrees. An asbestos or asbestos rope may be used for a larger pressure vessel. When asbestos ropes are used, they are usually impregnated with water glass. Acid, alkali, solvents and other media can also use such gaskets. Asbestos rubber sheet. Asbestos rubber sheet is made of asbestos, rubber and stuffing. Asbestos fiber generally accounts for 60%-85%. According to its distribution process, performance and application of different, mainly high-pressure asbestos rubber sheet, medium and low pressure asbestos rubber sheet and oil resistant asbestos rubber sheet. Asbestos rubber sheet has the properties of proper strength, elasticity and softness, and it is convenient and cheap to make gaskets. Therefore, it has been rapidly popularized and applied in chemical enterprises. Flexible graphite.
- Q: Where is the three yuan catalyst sealing inspection machine?
- Three yuan catalyst special sealing inspection machine should not sell, domestic can produce three yuan catalytic converter manufacturers can be counted, so even if there is the production of this equipment manufacturers, a year also can't sell several units;
- Q: How can the swivel washer be disassembled and replaced? Which God knows how to change the gasket? The faucet leaks. Maybe the washer is broken
- You see the faucet switch that there should be a glue brand OEM OEM, put the Alice down, there is a screw removed, and then put the switch part rotating down, there should be a brass valve, with a bayonet on the spool, direct screw buckle will be able to get out of the valve core. The inlet valve is closed and then engaged.
- Q: Gasket is a kind of machinery, equipment, pipes and other internal sealing materials, which types are there?High and medium pressure asbestos rubber sheet gasket, oil asbestos rubber gasket, cylinder gasket, aramid gasket, non asbestos plate gasket, asbestos pad, PTFE lining rubber pad, I know that, there are other ones?Can anyone tell me what their scope of application is?
- The new organization dense, molecular structure of non-polar, used as a gasket, contact surface can be smooth, the metal flange is not sticky. In addition by molten alkali metal and containing fluorine gas erosion, which is resistant to many kinds of acid and alkali, salt, oil solution of corrosive media. PTFE gasket including pure PTFE, PTFE or PTFE expansion. The semi metallic gasket (also called metal gasket). Non metallic material has good flexibility, compression and bolt load ability is low. But it is mainly to determine the strength is not high, poor elasticity, not suitable for high pressure temperature. So the combination of metal materials with high strength and good elasticity. Withstand high temperature characteristics. The formation structure is semi metal gasket. The gasket. Semi metal gasket are mainly metallic gasket, metal winding gasket, corrugated metal gasket, with metal serrated gasket with the metal. Gasket (metal gasket). The gasket to nonmetal material core, thickness of sheet metal 0.25-0.5mm outsourcing. According to the state of coating can be divided into coating, coating, coating and half wave Double coated sheet metal. According to the elastic-plastic material, heat resistance and corrosion resistance were selected. Mainly copper, galvanized iron, stainless steel, titanium, Monel alloy. It is widely used in copper, galvanized iron, stainless steel.
- Q: How do I remove the rubber sealing washer for the washer inlet valve?
- When the dirty water filter valve plug, usually use the brush will be able to solve the problem (without dismantling),
- Q: How about the valve gasket?
- Only when the flange connection structure or thread connection structure, the static sealing cover and the gasket are checked correctly, other valve fittings can be installed with the valve gasket after the repair is completed. (1) on the front of the valve gasket, the sealing surface, gasket, thread and bolts, nuts, rotating parts coated with a layer of graphite powder or molybdenum disulfide powder. Gaskets, graphite should be kept clean, shall not stain (gasket bags are not sticky ash; graphite powder boxed, stamped), with the use of, shall not be thrown everywhere.
- Q: Should the BYD F3 intake manifold installation be encrypted?
- Hello!Extra required! If not, use sealant, too!Hope to help you, I wish you a pleasant ride! There's something wrong with the car. Ask the car master. 4S shop professional technicians, 10 minutes to solve. ]
- Q: Why don't gaskets use metal gaskets in general?
- Gasket is a kind of machinery, equipment, pipes, as long as there is a fluid, that is, the use of sealed spare parts, the use of internal and external parts, sealing material.
- Q: What kind of hardness is used to measure the hardness of gaskets, gaskets, gaskets and O rings?
- It's all rubber, but if it's Shaw's hardness tester, but you'll have to figure out Shaw's hardness tester. There are two kinds of HA and HD, one is soft rubber, one is hard rubber, and that's what you look like!
Send your message to us
Seal Seals O seals NR O ring NR O seal gasket NR seal NR gasket
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
