NBR O ring NBR O seal NBR O gasket NBR O seal gasket NBR SEAL NBR GASKET
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Silicone O Ring,Viton O Ring,Rubber O Ring
1.Mould:More 5000
2.Best price and high quality
3.Certificate:ISO9001-2000,TS16969
| NBR O ring. Abbreviation: NBR Common Name:Buna N, Nitrile, NBR Chemical Definition:Butadiene Acrylonitrile General Characteristics:Waterproof,oilproof Durometer-Range (Shore A):20-95 Tensile Range (P.S.I):200-3000 Elongation (Max.%):600 Compression Set:Good Resilience-Rebound:Good Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Good to Excellent Oil Resistance:Good to Excellent Low Temperature Usage (°F):-30° to - 40° High Temperature Usage (°F):to 250° Aging Weather-Sunlight:Poor Adhesion To Metals:Good to Excellent Usual Hardness range:50-90 shore A Advantage: 1. Has good solvent, oil, water and hydraulic fluid resistance. 2. Good compression set, abrasion resistance and tensile strength. Disadvantage: 1. Not recommended for using in highly polar solvents such as acetone, and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons. Usage: fuel tank, grease-box, hydraulic, gasoline, water, silicone oil, etc |
|
Viton O ring.
Abbreviation :FKM
Common Name :Fluoro Elastomers
ASTM D-2000 classification:HK
Military(Mil-Std417) :MIL=R-25897/MIL-R-83248
Chemical Definition :Fluorinated Hydrocarbon
Durometer-Range (Shore A) :60-90
Tensile Range (P.S.I) :500-2000
Elongation (Max.%) :300
Compression Set:Good
Resilience-Rebound:Fair
Abrasion Resistance:Good
Tear Resistance:Good
Solvent Resistance:Excellent
Oil Resistance:Excellent
Low Temperature Usage (°F:+10° to -10°
High Temperature Usage (°F) :400° to 600° (depending on time and service condition)
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Advantage:
1. Heat resistance up to 600°F
2. Resistance to wide range of oils and solvents; specially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils.
Disadvantage:
1. Not recommended for ketones, low molecular weight esters and nitro containing compounds.
Usage:
Automobile,motorcycle,diesel engine,and fuel system
Silicone O ring. Abbreviation :silicone ASTM D-2000 classification:FC,FE,CE Military(Mil-Std417) :TA Chemical Definition :polysiloxane Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :200-1500 Elongation (Max.%) :700 Compression Set:Good Resilience- Rebound:Good Abrasion Resistance:Fair to poor Tear Resistance:poor Solvent Resistance:poor Oil Resistance:Fair to poor Low Temperature Usage (°F:-60° to -150° High Temperature Usage (°F) :450° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Advantage: 1.after modulating formula, the tensile strength up to 1500 psi, and tear resistance up to 88 LBS. 2.Good elasticity and good compression deformation. 3.good resistance to neutral solvent. 4.excellent heat resistance. 5.With excellent cold resistance. 6.with excellent resistance to erosion of ozone and oxides . Disadvantage: 1.Does not recommend is suitable for most concentrated solvent, oil, concentrated acid after dilute sodium hydroxide Usage: Appliance:electric kettle,electric iron,Microwave owen,etc
Keypad,heat shock in DVD,cable connector
|  |
HNBR O ring. Abbreviation:HNBR Common Name:HNBR Chemical Definition:Hydrogenated AcrylonitrileButadiene General Characteristics:abrasion, compression set, tensiles Durometer-Range (Shore A) :50-90 Tensile Range (P.S.I) :2600 Elongation (Max.%):530 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Good Oil Resistance:Excellent Low Temperature Usage (°F) :-65° to 250° High Temperature Usage (°F) :to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Usual Hardness range:60-80 shore A Usage: Fridge,automobile engine,etc |  |
| EPDM O ring. Abbreviation:EPDM Common Name:EPR, EPT, EPDM ASTM D-2000 classification:CA Military(Mil-Std417) :RS Chemical Definition:Ethylene Propylene Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :500-2500 Elongation (Max.%) :600 Compression Set :Good Resilience-Rebound :Good Abrasion Resistance:Good Tear Resistance:Fair Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F) :-20° to 60° High Temperature Usage (°F):to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Fair to Good Usual Hardness range:50-90 shore A Usage: Sanitary ware; brake; radiator |
| NR O ring. Abbreviation:NR Common name:Nature Rubber ASTM D-2000 classification:AA Military(Mil-Std417) :RN Chemical Definition :polyisoprene Durometer-Range (Shore A) :20-90 Tensile Range (P.S.I) :500-3500 Elongation (Max.%) :700 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F:-20° to -60° High Temperature Usage (°F) :to 175° Aging Weather-Sunlight:Poor Adhesion To Metals: Excellent Usual Hardness range:35-80 shore A |
Neoprene O ring. Abbreviation :Neoprene ASTM D-2000 classification:BC,BE Military(Mil-Std417):SC Chemical Definition :polychloroprene Durometer-Range (Shore A) :20-95 Tensile Range (P.S.I) :500-3000 Elongation (Max.%) :600 Compression Set:Good Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Fair Oil Resistance:Fair Low Temperature Usage (°F:+10° to -50° High Temperature Usage (°F) :to 225° Aging Weather- Sunlight:Good Adhesion To Metals:Good to Excellent Usal Hardness range:50-90 shore A |  |
- Q:What tools or equipment do you have?Based on how iron does not hurt the spark plug on the seal pad downYou can cut the gasket, but you don't know what tools to use. Do you know?
- You can use oil (preferably diesel), dip (pay attention to dip washers only), and then gently use a knife and other thin tools to pry.
- Q:Why should the washer be fitted when the screws are installed?
- Washers are divided into flat washers and spring washers. After the screws are tightened, because of the small contact area with the base, the installation of flat washers can increase the pressure area of the base and tighten the base, which will not cause the damage or sliding of the base. The spring washer increases the stress of the buckle and makes the fastening of the screw more fastening
- Q:The gasket we used recently found some leaks.The following is the use of gasketsGaskets for pipe flange connections, piping air pressure 10 kg, gas free corrosion. The temperature is 40 degrees. What kind of gasket should be chosen to meet the working conditions I put forward?.
- Economically, the graphite pad and asbestos free are relatively cheaper. There's a problem, ++369643049, huh?
- Q:Gaskets / seals, where are those / manufacturers available?
- 3, piston special sealing ring: (lips mouth sealing ring: SODI, YXD, UNP, UHP, KDAS, SPGO)
- Q:What kind of gasket does flange have? What standard does it have?
- There are many gaskets for flanges, such as metal winding pads, toothed pads, graphite composite pads, asbestos rubber pads, PTFE gaskets, rubber mats, etc. each gasket has standard. There's a gasket problem, ++369643049, huh?
- Q:How do you use them? One hundredAre there any expanded PTFE gaskets in China? How about with Joe?
- Gore is just a world - famous company,Polytetrafluoroethylene PTFE material is composed of 100% after special processing and manufacture, with excellent flexibility, excellent adaptation property and molding ability, and has high tensile strength, creep resistance, temperature resistance, corrosion resistance, aging resistance, cold flow. Can not bad long-term storage, no pollution, and is composed of multi direction fiber countless homogeneous fine soft tough, high density fibrous tissue with unique, compressed fiber will become more closely intertwined, uniform, airtight, waterproof, sealing performance is good, in severe corrosive environment and high temperature also, can maintain excellent sealing state.The material is suitable for low pressure sealing applications. It can be used as a highly sealed and highly corrosive environment for biological pharmaceutical, food, chemical, refining, military, marine, aerospace and mechanical industries. Heat exchanger, FRP, compression frame flange, steam container flange, liquid and gas system, water system, ventilation fan rack and other construction sites.Durability, weather resistance, high safety, used for industrial leak sealing.Main technical parameters:Density (Density):1.0g/cm3Pressure (Pressure) < 4.0MpaTemperature (Temperature) -100~200 DEG CPH value (PH range) 0-14
- Q:Installation requirements for gaskets
- 1, the installation and the sudden plane flange matching sealing gasket, should pay attention to ensure that the sealing parts and pipes concentric, generally use additional strong ring and bolt internal circumferential contact to locate, not allow eccentric installation. When installing the basic spiral wound gaskets in the close flange of the mortise and tenon surfaces, the gap shall be kept in line with the groove wall.2, installation of the narrow width of the metal gasket, should be a certain thickness of the gasket plate on the outside, and then press the flange, so as to avoid compression filler metal gasket in the metal shell, the interface (or interface) burst damage, metallic gasket.3, when the flange work temperature is higher than 200 degrees, in the flange sealing surface and sealing gasket should be painted with sealant, in order to prevent high temperature sealing gasket and flange sealing surface sintering, to repair and replace the gasket to increase trouble.4, sealing surface is not normal, can be coated with sealant on the sealing surface, and then install the gasket. The sealant generally consists of red lead, manganese dioxide, graphite powder and boiled linseed oil (oil) formed after. According to the sealing medium, working temperature and medium pressure and other conditions, choose the corresponding types and grades of liquid sealant.5, for the installation of octagonal metal ring gasket, when the metal ring gasket and flange sealing groove processing is not ideal, can be achieved through research and close fitting. For large diameter metal ring gaskets, it is difficult to match and grind. In order to fill the tiny surface of metal surface, sealant can be used.
- Q:What is the standard for ASME GASKET?
- There are many kinds of ASME fasteners, such as A320-B8, A194-8, A193-B8, A193-B8, Cl2 and so on. Do use, processing, distribution of the United States, bolts and nuts, bolts nuts, bolts and nuts American Standard, must have the standard screws. Can buy a set of the latest United States fasteners standard "IFI British standard fasteners manual" as a reference.
- Q:304 stainless steel gasket, how sealed?
- Hello, 304 stainless steel ring gasket if made, the sealing performance in general, sealed liquid should also improvise, but the sealing gas on the more difficult.
- Q:What are the production standards and quality control standards?
- GB, 4848 - 1984 food container rubber washer [
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
NBR O ring NBR O seal NBR O gasket NBR O seal gasket NBR SEAL NBR GASKET
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
