Seals seal EPDM O ring EPDM O gasket EPDM seal gasket EPDM gasket EPDM seal
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Silicone O Ring,Viton O Ring,Rubber O Ring
1.Mould:More 5000
2.Best price and high quality
3.Certificate:ISO9001-2000,TS16969
| EPDM O ring. Abbreviation:EPDM Common Name:EPR, EPT, EPDM ASTM D-2000 classification:CA Military(Mil-Std417) :RS Chemical Definition:Ethylene Propylene Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :500-2500 Elongation (Max.%) :600 Compression Set :Good Resilience-Rebound :Good Abrasion Resistance:Good Tear Resistance:Fair Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F) :-20° to 60° High Temperature Usage (°F):to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Fair to Good Usual Hardness range:50-90 shore A Usage: Sanitary ware; brake; radiator |
|
Viton O ring.
Abbreviation :FKM
Common Name :Fluoro Elastomers
ASTM D-2000 classification:HK
Military(Mil-Std417) :MIL=R-25897/MIL-R-83248
Chemical Definition :Fluorinated Hydrocarbon
Durometer-Range (Shore A) :60-90
Tensile Range (P.S.I) :500-2000
Elongation (Max.%) :300
Compression Set:Good
Resilience-Rebound:Fair
Abrasion Resistance:Good
Tear Resistance:Good
Solvent Resistance:Excellent
Oil Resistance:Excellent
Low Temperature Usage (°F:+10° to -10°
High Temperature Usage (°F) :400° to 600° (depending on time and service condition)
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Advantage:
1. Heat resistance up to 600°F
2. Resistance to wide range of oils and solvents; specially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils.
Disadvantage:
1. Not recommended for ketones, low molecular weight esters and nitro containing compounds.
Usage:
Automobile,motorcycle,diesel engine,and fuel system
Silicone O ring. Abbreviation :silicone ASTM D-2000 classification:FC,FE,CE Military(Mil-Std417) :TA Chemical Definition :polysiloxane Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :200-1500 Elongation (Max.%) :700 Compression Set:Good Resilience- Rebound:Good Abrasion Resistance:Fair to poor Tear Resistance:poor Solvent Resistance:poor Oil Resistance:Fair to poor Low Temperature Usage (°F:-60° to -150° High Temperature Usage (°F) :450° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Advantage: 1.after modulating formula, the tensile strength up to 1500 psi, and tear resistance up to 88 LBS. 2.Good elasticity and good compression deformation. 3.good resistance to neutral solvent. 4.excellent heat resistance. 5.With excellent cold resistance. 6.with excellent resistance to erosion of ozone and oxides . Disadvantage: 1.Does not recommend is suitable for most concentrated solvent, oil, concentrated acid after dilute sodium hydroxide Usage: Appliance:electric kettle,electric iron,Microwave owen,etc
Keypad,heat shock in DVD,cable connector
|  |
| NBR O ring. Abbreviation: NBR Common Name:Buna N, Nitrile, NBR Chemical Definition:Butadiene Acrylonitrile General Characteristics:Waterproof,oilproof Durometer-Range (Shore A):20-95 Tensile Range (P.S.I):200-3000 Elongation (Max.%):600 Compression Set:Good Resilience-Rebound:Good Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Good to Excellent Oil Resistance:Good to Excellent Low Temperature Usage (°F):-30° to - 40° High Temperature Usage (°F):to 250° Aging Weather-Sunlight:Poor Adhesion To Metals:Good to Excellent Usual Hardness range:50-90 shore A Advantage: 1. Has good solvent, oil, water and hydraulic fluid resistance. 2. Good compression set, abrasion resistance and tensile strength. Disadvantage: 1. Not recommended for using in highly polar solvents such as acetone, and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons. Usage: fuel tank, grease-box, hydraulic, gasoline, water, silicone oil, etc |
HNBR O ring. Abbreviation:HNBR Common Name:HNBR Chemical Definition:Hydrogenated AcrylonitrileButadiene General Characteristics:abrasion, compression set, tensiles Durometer-Range (Shore A) :50-90 Tensile Range (P.S.I) :2600 Elongation (Max.%):530 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Good Oil Resistance:Excellent Low Temperature Usage (°F) :-65° to 250° High Temperature Usage (°F) :to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Usual Hardness range:60-80 shore A Usage: Fridge,automobile engine,etc |  |
| NR O ring. Abbreviation:NR Common name:Nature Rubber ASTM D-2000 classification:AA Military(Mil-Std417) :RN Chemical Definition :polyisoprene Durometer-Range (Shore A) :20-90 Tensile Range (P.S.I) :500-3500 Elongation (Max.%) :700 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F:-20° to -60° High Temperature Usage (°F) :to 175° Aging Weather-Sunlight:Poor Adhesion To Metals: Excellent Usual Hardness range:35-80 shore A |
Neoprene O ring. Abbreviation :Neoprene ASTM D-2000 classification:BC,BE Military(Mil-Std417):SC Chemical Definition :polychloroprene Durometer-Range (Shore A) :20-95 Tensile Range (P.S.I) :500-3000 Elongation (Max.%) :600 Compression Set:Good Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Fair Oil Resistance:Fair Low Temperature Usage (°F:+10° to -50° High Temperature Usage (°F) :to 225° Aging Weather- Sunlight:Good Adhesion To Metals:Good to Excellent Usal Hardness range:50-90 shore A |  |
- Q: The engine cover, or valve cover, cylinder head cover, the cover is the engine.This is my graduation project... The NASTRAN is used, but the rest of the software is basically the same.Hope to have experienced master Zhidianmijin ah.At present, only 12 order free modal analysis is performed. The final is to do static strength, sealing. The details of the process are not clear. For example, how does the bolt hole bind? Does it hold all the points on the inside surface? What about the boundary conditions and loading? It has more than ten bolt holes, one ring gasket, and 120 0.7bar pressure inside. The material is engineering plastics.Or some people know the whole process from modeling to the results of the general steps to say, you can, thank you first. OK, add more. StopFrequency response and transient response are currently being done
- What a big question you asked! I'll tell you a little about it. I hope it will help you.Let's first talk about frequency response analysis!1. study the specialized finite element mesh division soft (HyperMesh)If you have plenty of time, first learn about the finite element mesh, like Hypermesh. The mesh is pretty nice. And you'll probably use it later on,.2. establish the calculation modelGroup the mesh models into Patran, and then combine them with paste and other functions. As for the bolt hole, you can fix the inner surface. If someone asks you for a reason, you can say that the result is conservative, and that's how it works in Engineering3. detailed steps, you can find reference books.I haven't done it myself for tightness. I'm not sure about my point of view. First of all, the problem is thermal gas solid coupling. Ha ha, seems very complicated. I don't know. I understand, right?Suggest you change ABAQUS software, try it. I'm not sure. There are plenty of examples in each software that you can take a look at. The ABAQUS help file has examples of thermal coupling and fluid solid coupling. You combine these two examples to see. What might be like?
- Q: That's good. I know that. I just don't know what the machine is made of. Can you explain it in detail?Chasing the answerThere is a press, you go to the machinery factory to ask, you know
- Non asbestos gaskets required for environmental protection.Metal gaskets or semi metal gaskets can be used for more pressure.
- Q: Filter replacement did not find a small ring, so there is no problem for the filter
- Hai Yu filter tells you, friend, that's a big problem. Is the filter closed and the sealing ring not leaking? Generally, the filter has a sealing ring. If you use the old machine to filter the sealing ring, it is recommended to change immediately, the sealing ring will be aging, easy to crack, oil spills.
- Q: I found that the hydraulic joint can be used as a gasket with an aluminum pad or a copper pad, and the effect is good, but I don't know if there will be any other effect after repeated disassembly or long serviceImports of hydraulic equipment in the middle of some even no sealing ring, but spent more than ten years will not leak, but after opening and then installed on the failure, why?
- The metal pad before using the best grinding, long time use is also good, but now the popular seal combination, inside is rubber, the outer ring is a metal skeleton, but also the price is disposable, and metal pad almost.Imported generally coated with sealant, so after opening and then installed on the die
- Q: Is the cylinder ring ring the same as the cylinder liner?
- The cylinder liner seal and gasket normally is not the same, but there will be false words, sometimes on-site staff will put two different products into the same name, then it is for staff and users to understand the confirmation of seal ring.
- Q: What's the difference between the washer and the gasket?
- The sealing ring is special to seal, and the sealing effect is better.Gaskets are also divided back cushion, flat pad, spring pad, etc., may not have a sealing effect.AskO-ring seals belong to? When the two pipes are joined together, a clamp and a sealing ring are required for the position of the joint To connect the two section of the pipe.Chasing the answerO-ring seal ring belongs to
- Q: What is the standard for ASME GASKET?
- There are many kinds of ASME fasteners, such as A320-B8, A194-8, A193-B8, A193-B8, Cl2 and so on. Do use, processing, distribution of the United States, bolts and nuts, bolts nuts, bolts and nuts American Standard, must have the standard screws. Can buy a set of the latest United States fasteners standard "IFI British standard fasteners manual" as a reference.
- Q: Why don't gaskets use metal gaskets in general?
- Gasket is a kind of machinery, equipment, pipes, as long as there is a fluid, that is, the use of sealed spare parts, the use of internal and external parts, sealing material.
- Q: IFG-5500 what's the material in the gasket?
- Temperature resistanceThe antioxidant fiber can withstand a continuous operating temperature of up to 550 degrees F (290 degrees C) with a maximum short peak temperature of 800 degrees F (425 degrees C)IFG 5500 has passed the Garlock refractory test and conforms to the ABS refractory type
- Q: Will the pipe flange be welded with graphite gaskets?
- 1, pipe flange connection, welding flange, graphite gasket can not put in, otherwise it will burn graphite pad.2, the flange connection of the pipe, no matter what kind of material used in the gasket, are completed in the welding process after adding gaskets, to avoid welding when the high temperature of the arc burn gasket.3, welding fixed mouth flange, should be in the flange joint surface pad insulation object, prevent electric spark broken bad sealing surface. Only when the flange temperature drops below 60 degrees can the gasket be added, the fastening bolt is completed, and the connection procedure of the flange is completed.
Send your message to us
Seals seal EPDM O ring EPDM O gasket EPDM seal gasket EPDM gasket EPDM seal
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
