SAE1008 Steel wire rod Size:5.5/6.5/7/8/9/10/11/12mm steel wire
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1,Grade:SAE1006,SAE1008.
2,Dia:5.5-12mm in stock
3,Applicant: wire drawing, welding electrode, nails
4,Coil weight1.8-2.1mt
Low carbon steel Wire rod
1.Diameter:5.5mm, 6.5mm,8mm,10mm,12mm
2.Material:SAE1006, SAE1008
3.Coil weight:1.8-2.1ton
4.Coil OD:1.1M, Coil Length:1.5M
5.Applicant: wire drawing,welding electrode, nail
6.Payment term: TT or L/C at sight
Please kindly find our chemistry of our material based on SAE1006B and SAE1008B as below for
your information:
Grade | Chemical Composition(%) | |||||
C | Mn | Si | S | P | B | |
SAE1006B | 0.03~O.07 | ≤0.32 | ≤0.30 | ≤0.045 | ≤0.040 | >0.0008 |
Mechanical properties | ||||||
Yield strength(N/mm2) | Tensile strength(N/mm2) | Elongation(%) | ||||
250-280 | 350-380 | ≥32 |
Grade | Chemical Composition(%) | |||||
C | Mn | Si | S | P | B | |
SAE1008B | 0.10max | 0.3~O.50 | 0.15max | 0.050max | 0.040 max | 0.0008 min |
Mechanical properties | ||||||
Yield strength(N/mm2) | Tensile strength(N/mm2) | Elongation(%) | ||||
≥195 | 315-430 | ≥30 |
- Q: Now a lot of furniture on the market, do not know the solid wood or wood imitation of the wood
- First of all, you can distinguish from the pattern, pure solid wood furniture pattern is no change in the law, and paste leather furniture pattern changes are very regular, such as butterfly-like, or words continue to head, and pure solid wood furniture patterns are irregular The second measure is that you can look at the furniture is not used to start the falcons, falcons are solid wood furniture, one of the necessary technology, the so-called falcon, that is, slot, wood and wood convergence is not glue and nails , But rather like a child to play the same building blocks, so that together, this is why the reasons for environmental protection of solid wood furniture, and the layout of the furniture is absolutely impossible to use frying craft third trick, generally better solid wood furniture, in addition to In addition to the structure of the falcon, there should be splicing technology, splicing is divided into two kinds, tooth and then flat, as the name suggests, tooth connection, is the two selected wood, both ends are playing like a tooth-like teeth, and then two pairs Together, this is the tooth connection, if there are teeth of the furniture, take the wardrobe door, the door inside and outside the tooth interface must be on the fourth move, solid wood furniture should generally be round circle The design of the corner, because only the wood, in order to withstand the pressure to cut into a circular, the layout is not possible
- Q: EVA is not a gospel warrior, rubbing experience can leave. Saying that my road has a curvature, how to make EVA board stereotypes. The The With the hair dryer are hot and did not respond. The The Is it my fault? And if the use of epoxy resin or atomic ash how to use Thank you to answer, rub the experience of the chat there are simply do not know the cloud of the shotgun wait. The The I want a ...
- EVA I have seen only 3 mm 5 mm 1 cm 2 cm 3 cm thick ? EVA several polishing Do not want the final product to look very smooth, evenly colored, one to two colors dry after the spray varnish BR /> with the ordinary knife and scissors cut We generally use the universal adhesive EVA is still very strong
- Q: What are the advantages of Yixing sheet compared to other plates?
- Compared with other, Yixu sheet first is a big brand is guaranteed, and is committed to doing high-end health and environmental protection of the plate, and good quality is not too expensive, cost-effective.
- Q: Are there any plates of E0 grade?
- There are ah, there are E0 eco-board, blockboard also E0 level!
- Q: Baosteel Cr2, Cr3 plate what material
- CR2 is the standard of ISO 3574, equivalent to GB03 (GB / T 5213, or EN 10130), or standard SPCD (refer to JIS 3574), or American Standard CS Type A, B (refer to ASTM A1008M-07) ; CR3, equivalent to GB04 (GB / T 5213, or EN 10130), or standard SPCE (refer to JIS 3574), or American Standard DS Type A, B (refer to ASTM A1008M-07);
- Q: How to choose to do the wardrobe with the plate
- The whole wardrobe in the eighties of last century is already essential furniture in Europe and America. Since the new century into China, with its personality design, tailored, fashion and environmental characteristics of the rapid acceptance, especially in recent years, the overall concept of the continuous penetration of the home, so that the overall wardrobe by the modern home consumers favor, become home improvement Essential furniture. But there is a problem and plagued the vast number of consumers, we all know that the overall wardrobe is the main plate, the plate is close to the overall quality of the wardrobe, environmental protection, so many consumers on the overall wardrobe plate how to choose no start. So how do you choose the overall wardrobe sheet? The following to focus on the overall wardrobe industry ten years of manufacturers - De Manman wardrobe for everyone in detail.
- Q: My family's kitchen seven-shaped, the amount is a total of four meters, one meter over the top cabinet, put a hood in the middle. Under normal circumstances if the woodworking need a few fire board? Do you need a few sheets?
- Cabinet fire board needs an area of 9.4 square meters (including) inside the partition, the specific area of how much (depending on how much), a sheet of 1.22 * 2.44 = 2.97 square meters, estimated the need for fire board (with loss) Four, even the top cabinet came out (these are counted on the table). Door area of about 4 square meters, count down 1.36, the door needs to buy two, but also some of the rich plate. Above for reference, if any access please do not see strange.
- Q: High voltage switchgear shell plate thickness
- I really switch cabinet manufacturers work I do not know about other units, I know Our unit is 2 to 3 mm or so, the material is Complex aluminum zinc plate
- Q: Is the board of the coastal wood grade the E0 grade sheet? E0 level with E1 grade plate What is the difference?
- Coastal wood sheet has E0 grade plate. E0 / E1 / E2 and the difference: In 2004, in the national standard (GB / T9846.1-9846.8-2004), marked the E0 ≤ 0.5mg / L limit level, E0 level is China and the international caravan board and its products in the formaldehyde emission limit The highest standards; December 10, 2001, the State Administration of Quality Supervision, Inspection and Quarantine issued a "interior decoration materials man-made board and its products in the formaldehyde release limit" (GB / T18580-2001), marked E1 ≤ 1.5mg / L limit Level, the provisions of E1-class products can be directly used for indoor; December 10, 2001, the State Administration of Quality Supervision, Inspection and Quarantine issued a "interior decoration materials, wood-based panels and their products in the formaldehyde release limit" (GB18580-2001) marked E2 ≤ 5mg / L, E1 ≤ 1.5mg / L two limited levels, the provisions of E1-level products can be used directly for indoor. E2 grade products must be finishes before they can be used indoors. Last year, the "plywood" national standard GB / T9846.1-9846.8-2004 inside the formaldehyde limit level is divided into three levels, namely E2 ≤ 5.0mg / L, E1 ≤ 1.5 mg / L, E0 ≤ 0.5 mg / L. E1 is a national mandatory health standard, it is mandatory "safety standard line". E0 standard is the current international high health standards. Because the 0.5mg / l formaldehyde content is already a very safe numerical standard. According to the relevant data show that the formaldehyde content of drinking water is 0.9mg / l, ????In other words, E0 standard formaldehyde content is less than drinking water. Environmental protection products with high levels of natural prices should be high in the production cost is certainly high.
Send your message to us
SAE1008 Steel wire rod Size:5.5/6.5/7/8/9/10/11/12mm steel wire
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords