Rubber Hose 4SP DN50
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
ID of Hose(mm) | ED of Hose(mm) | ED of Braided ply(mm) | Work Pressure(MPa) | Work Pressure(PSI) | Min Explosive Pressure(MPa) | Min Explosive Pressure(PSI) | Min Bending Radius(mm) | UnitWeight(kg/m) | UnitWeight(ib/ft) |
5+/-0.5 | 12.7+/-0.8 | 9.5+/-0.6 | 21 | 3043 | 63 | 9129 | 90 | 0.3 | 0.019 |
6+/-0.5 | 16+/-7 | 11.7+/-0.6 | 20 | 2898 | 60 | 8694 | 100 | 0.34 | 0.021 |
8+/-0.5 | 18+/-7 | 13.7+/-0.69 | 17.5 | 2536 | 52.5 | 2608 | 115 | 0.42 | 0.026 |
5+/-0.5 | 15+/-0.8 | 11.2+/-0.6 | 60 | 8694 | 180 | 26082 | 90 | 0.4 | 0.025 |
6+/-0.5 | 18+/-1 | 13.5+/-0.6 | 60 | 8694 | 180 | 26082 | 100 | 0.45 | 0.028 |
8+/-0.5 | 20+/-1 | 15.5+/-0.6 | 50 | 7245 | 150 | 21735 | 115 | 0.62 | 0.039 |
5+/-0.5 | 17+/-0.8 | 13.2+/-0.6 | 72 | 10433 | 180 | 26082 | 120 | 0.5 | |
6+/-0.5 | 19+/-1 | 15+/-0.6 | 68 | 9853 | 170 | 24633 | 140 | 0.56 | |
8+/-0.5 | 22+/-1 | 17.5+/-0.6 | 54 | 7825 | 120 | 17388 | 160 |
- Q:What are the standard numbers for hose couplings? What standards are they used to accomplish?
- The general hose inside and outside the adhesive layer material with natural rubber, styrene butadiene rubber or butadiene rubber; hose with chloroprene rubber, nitrile rubber; acid and alkali resistant, high temperature resistant hose with ethylene propylene rubber, fluorine rubber or silicone rubber etc..
- Q:What is a rubber core pulling method?
- When using the core pulling method, the hole is usually made of 5 - 7 layers of canvas and 6 - 7mm thick rubber tube. The hose can be used for retaining the straight lines, curves or broken lines.
- Q:What's the detailed size of hose connection for shower?
- First, take a bath with hot water, sweat pores, body dirt with sweat excreted; second, hot water to make the blood flow smoothly, promote the The new supersedes the old. refreshing,; third, for a hot bath and systemic vascular dilatation, and because of a cold bath and contraction. Such a contraction of blood vessels, enhanced flexibility, it is difficult to harden, blood pressure is not high, the old can prevent stroke.
- Q:Faucet hose connection problem
- It is recommended to buy two kinds of hard bellows, soft metal hoses (black silk stripes). When the metal hose is installed, the joint should be horizontal or vertical, and the water pipe and gasket are not sealed properly. It will leak and do not need to be eaten with raw material.
- Q:Does rubber hose drink from tap water? Is it poisonous?
- Galvanized steel pipe is divided into cold galvanized pipe, hot galvanized pipe, the former has been banned, and the latter is also advocated by the state for the moment, can be used. In 60s and 70s, developed countries began to develop new types of pipes, and galvanized pipes were banned. China's Ministry of construction and other four ministries have also issued a civilization, from two, 000 years since the prohibition of galvanized pipe, the current New District cold water pipe has rarely used galvanized pipe, and some of the hot water pipe is galvanized pipe.
- Q:How to determine the tensile strength of GB rubber joint?
- In the middle of the specimen, 4 parallel lines marked by the mark mark are used to mark two distances equal to the standard distance (type 1 is 25mm, type 2 is 20mm, and type 3 is lOmm), and each reticle shall be equidistant from the center of the sample. If the non-contact deformation measuring device is used, the proper marking device shall be used, and two parallel markings shall be placed on the narrow parallel part of the sample. Each mark shall be equidistant from the specimen center and perpendicular to the long axis of the specimen, and the specimen shall not deform during the marking.Style cutting, punching machine blanking note the above points, is to test the tensile strength of rubber joints based on, but also guarantee.
- Q:What are the matters that should be paid attention to when installing rubber hose joint in water pump?
- Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;
- Q:There are several ways to connect the built-in rubber stop
- The spot heat vulcanization method is a heat vulcanizing mould matched with a water stopping strip and a raw film vulcanizing heat junction. The construction is difficult, but the joint effect is ideal, which is suitable for the project with strict quality requirements.
- Q:What with the appropriate suction tube Dichotomanthes tube and rubber machine
- The spiral tube called spiral steel tube or spiral welded pipe, the low carbon steel or low alloy structural steel strips in a helical line certain angle (called forming angle) rolled into a tube, then the tube welding seam made up, it can be used in narrow strip production of large diameter steel pipe spiral pipe is mainly used in oil.
- Q:How can I remove all the flavor on the rubber hose?
- After the hot water is directly boiled, wrap it directly with transparent glue
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Rubber Hose 4SP DN50
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords