Rubber Hose 4SP DN38
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
ID of Hose(mm) | ED of Hose(mm) | ED of Braided ply(mm) | Work Pressure(MPa) | Work Pressure(PSI) | Min Explosive Pressure(MPa) | Min Explosive Pressure(PSI) | Min Bending Radius(mm) | UnitWeight(kg/m) | UnitWeight(ib/ft) |
5+/-0.5 | 12.7+/-0.8 | 9.5+/-0.6 | 21 | 3043 | 63 | 9129 | 90 | 0.3 | 0.019 |
6+/-0.5 | 16+/-7 | 11.7+/-0.6 | 20 | 2898 | 60 | 8694 | 100 | 0.34 | 0.021 |
8+/-0.5 | 18+/-7 | 13.7+/-0.69 | 17.5 | 2536 | 52.5 | 2608 | 115 | 0.42 | 0.026 |
5+/-0.5 | 15+/-0.8 | 11.2+/-0.6 | 60 | 8694 | 180 | 26082 | 90 | 0.4 | 0.025 |
6+/-0.5 | 18+/-1 | 13.5+/-0.6 | 60 | 8694 | 180 | 26082 | 100 | 0.45 | 0.028 |
8+/-0.5 | 20+/-1 | 15.5+/-0.6 | 50 | 7245 | 150 | 21735 | 115 | 0.62 | 0.039 |
5+/-0.5 | 17+/-0.8 | 13.2+/-0.6 | 72 | 10433 | 180 | 26082 | 120 | 0.5 | |
6+/-0.5 | 19+/-1 | 15+/-0.6 | 68 | 9853 | 170 | 24633 | 140 | 0.56 | |
8+/-0.5 | 22+/-1 | 17.5+/-0.6 | 54 | 7825 | 120 | 17388 | 160 |
- Q:What kind of material is medical rubber tube?
- General medical grade silicone tube, environmental protection, no odor, in line with food grade certification FDA/SGS/ROHS/LFGB, widely used in the medical industry. Friends do not understand, you can contact me. New silicon rubber pipe
- Q:Are the bridges, bellows and rubber tubes drawn out or are they drawn only? And the bellows are tensioned with the steel strand?
- The bellows are buried inside the component and do not need to be pulled out. Through reinforcement, only pre-stressed, without tension bellows. When tensioning anchor is completed, grouting work is necessary.
- Q:Aging of natural gas pipeline
- 1, when in use, should always pay attention to the color of the fire. Orange flames indicate incomplete combustion of gas, and in this case carbon monoxide is released. The fire can be adjusted by adjusting the air door at the bottom of the stove, and the flame is blue.2, soup or water, containers should not be overfilled, nor unattended, so as to avoid the fire was spilled soup, water and water leakage.3, in a stew or soup, some people love the flame was very small, this can easily lead to leakage or incomplete combustion. Therefore, in the use of gas stoves, the fire can not be too small.Between the 4, and gas appliance hose inlet connector to connect closely, preferably with a pipe clip.5, in the same room, strictly prohibit the simultaneous use of two kinds of fire sources.6, the family is best equipped with dry powder fire extinguishers, so as to be prepared.
- Q:What's the smell of petrol in the car and the trunk?! Especially after a long drive!
- Some owners of the gas fuel to add too full, while refueling no leakage, but gasoline but follow the line and into the carbon canister in the tank, the steam release even a gasoline release out, if it is in air conditioning circulating state, the car will be able to smell the smell of gasoline.Solution: as long as the carbon canister inside the gasoline consumed, the excess carbon canister gasoline vapor through the engine negative pressure into the cylinder combustion, there will be no gasoline vapor overflow, and then open the window ventilation is.If you smell the smell of gasoline at the same time there is a pungent rubber flavor, it should be careful, there may be a harbinger of fire, you have to do a good job of checking and preventive measures in advance.
- Q:How to determine the tensile strength of GB rubber joint?
- In the middle of the specimen, 4 parallel lines marked by the mark mark are used to mark two distances equal to the standard distance (type 1 is 25mm, type 2 is 20mm, and type 3 is lOmm), and each reticle shall be equidistant from the center of the sample. If the non-contact deformation measuring device is used, the proper marking device shall be used, and two parallel markings shall be placed on the narrow parallel part of the sample. Each mark shall be equidistant from the specimen center and perpendicular to the long axis of the specimen, and the specimen shall not deform during the marking.Style cutting, punching machine blanking note the above points, is to test the tensile strength of rubber joints based on, but also guarantee.
- Q:What are the types of metal hose couplings?
- DKJ jointStructure and characteristics:The DKJ card sleeve type metal hose joint can connect the steel pipe without the screw and the hose, and save the thread setting process, just screw the screw in;The metal joint is made of zinc alloy. The surface is zinc plated, sanded or chrome plated. The structure is compact and the strength is high. The steel pipe and the metal hose are connected reliably, and the appearance is beautiful;The metal fittings are jacketed to connect the metal hose to the non threaded steel tube;Suitable metal hose: JS, JSH, JSB, JSHG;Adaptation: steel thin steel wire pipe, black, tin pipe (water, gas);When choosing DKJ card type metal joint, please pay attention to the specification and size of the connecting pipe hose.
- Q:The copper joint is leaking, and the tap water hose and copper joint are leaking
- It is suggested that the material used for piping may be better. At least the same material
- Q:How should we distinguish between the silicone hose and the rubber tube?
- Silicone hose is relatively soft, flexible, and looks better than other rubber tube gloss, color is mostly red, blue, translucent and other colors. Others, such as three yuan ethylene propylene and nitrile rubber hose, are basically black.
- Q:Water heater hose 4 points and 6 points difference
- 4, in charge of 1/2 inches of pipe, 6 in charge of 3/4 inches of pipe, different specifications of some differences.The so-called 5 turn 4, should be different diameter, that is, pipe and pipe joints, parts of different specifications.A bellows is a pipe, not flat, corrugated.
- Q:Why are the lengths of the household combustion equipment linked to the gas pipe hose no more than 2 meters?
- A pipe is a weak link. Many accidents occur on pipes. In theory, the leakage of pipe per unit length may be the same. Then, the longer the pipe, the higher the risk coefficient.In reality, the longer the tube, the higher the possibility of being clipped. For example, bending, stretching, foot work, cracking, aging, these are potentially dangerous.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Rubber Hose 4SP DN38
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords