Hydraulic Hose SAE100 R5
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000M m
- Supply Capability:
- 80000 Meter Per Month m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details of Hydraulic Hose SAE100 R5
I.D: | 3/16"~4" | Length: | 100m 50m 40m 20m | W.P: | 80bar-420bar |
B.P: | 320bar-1700bar | Material: | synthetic rubber | Surface: | smooth and cloth |
Brand: | print and embossed | Color: | black and colorful | Package: | transparent plastic film |
Specifications of Hydraulic Hose SAE100 R5
1,Application: A low pressure, textile reinforced hose for petroleum or water based hydraulic fluids or pneumatic applications. Not to be used for air brake.
2,Inner tube:nitrile
3,Reinforcement:two textile braids
4,Cover compound: neoprene
5,Temperature range: -40°F~ 212°F; -40oC~ +121oC
6,Color available: black, grey, blue, yellow, red, etc.
The Technical Parameters of Hydraulic Hose SAE100 R5
Part | Hose Size ID | Hose OD | Max. Working Pressure | Min. Bend Radius | Min. Burst Pressure | |||||
in | DIN | in | mm | psi | mpa | in | mm | psi | mpa | |
R5-04 | 3/16 | 4.8 MM | 0.52 | 13.2 | 3000 | 20.7 | 3 | 76 | 12000 | 82.7 |
R5-05 | 1/4 | 6.4 MM | 0.58 | 14.8 | 3000 | 20.7 | 3.38 | 86 | 12000 | 82.7 |
R5-06 | 5/16 | 7.9 MM | 0.67 | 17.1 | 2250 | 15.5 | 4 | 102 | 9000 | 62.1 |
R5-08 | 13/32 | 10.3 MM | 0.76 | 19.5 | 2000 | 13.8 | 4.62 | 117 | 8000 | 55.2 |
R5-10 | 1/2 | 12.7 MM | 0.92 | 23.4 | 1750 | 12.1 | 5.5 | 140 | 7000 | 48.3 |
R5-12 | 5/8 | 15.9 MM | 1.07 | 27.4 | 1500 | 10.3 | 6.5 | 165 | 6000 | 41.4 |
R5-16 | 7/8 | 22.2 MM | 1.23 | 31.4 | 800 | 5.5 | 7.38 | 187 | 3200 | 22.1 |
R5-20 | 1 1/8 | 28.6 MM | 1.5 | 38.1 | 625 | 4.3 | 9 | 229 | 2500 | 17.2 |
R5-24 | 1 3/8 | 35 MM | 1.75 | 44.4 | 500 | 3.4 | 10.5 | 267 | 2000 | 13.8 |
R5-32 | 1 13/16 | 46 MM | 2.22 | 56.4 | 350 | 2.4 | 13.25 | 337 | 1400 | 9.7 |
Packaging & Delivery
Packaging Detail: | By woven bag |
Delivery Detail: | In 15~30days after receiving the 30% deposit |
- Q: Is hot melt hose toxic and harmful?
- The heater adopts the U.S. and high temperature heating wire line, uniformly wound around the pipe wall, with thermal insulating properties and uniformity, good heat resistance, heat insulation material of high quality, ensure that the insulation performance of larynx.
- Q: What kinds of pipe joints can be divided into? What are the differences between the so-called one - piece pipe joint and other types of pipe joint?
- The pipe joint is divided into a steel pipe joint and a hose joint.The steel pipe joint is provided with a clamp sleeve type, a welding type, a clapboard is connected, a reducing connecting, an oil inlet connection, a combined connection, a pressure gauge connection, a flange connection, etc..A seizure type hose connector, removable, plug-in, you said one pipe joint is extruded hose connector, connector and sleeve is one, there is a separate.My side is to do this piece, the United States PARKER Parker hydraulic hose, joints, assembly, quick change connector.
- Q: The difference between the rubber pipe and PE pipe
- PE is the most basic plastic of polyethylene plastics, plastic bags, plastic film and so on are PE, HDPE is a high crystallinity, non-polar thermoplastic resin. The appearance of the native HDPE is milky white and is somewhat translucent in the narrow cross section.
- Q: Is flexible rubber joint and telescopic device a kind of thing?
- The utility model discloses a pipe expansion device, which is a connecting piece which is compensated by the size change caused by thermal expansion and cold contraction in the pipe connection. There are two kinds of pipe expander, one is rubber pipe telescopic device, and the other is metal pipe telescopic device.
- Q: What is a hose valve?
- Hose valve structure is simple, easy to overhaul and replace rubber hose, with a multi-purpose valve, hose valve can also replace the gate valve, stop valve, control valve use. Manual hose valve cold resistance and good wear resistance, according to the needs of chemical production users, using a variety of recipes produced.
- Q: Hose connector JB1885-77 what is the standard?
- The reason of high pressure hose joint leakage are the following: "a" ring aging or deformation caused by leakage; the "C" ring assembly is not in place, the two plane connection or "C" uneven pressure ring is cut caused by leakage; "a" ring without compaction, the elastic deformation caused by leakage; the "C" ring spigot groove deep caused leakage. In this regard, the need to re select the same diameter and thick section "C" ring, can also be provided with a sealing plane rabbet groove of cutting or grinding, in order to reduce the rabbet groove depth, the "C" ring has enough elastic deformation (compression should be between 0.35-0.65mm).
- Q: Aging of natural gas pipeline
- 1, when in use, should always pay attention to the color of the fire. Orange flames indicate incomplete combustion of gas, and in this case carbon monoxide is released. The fire can be adjusted by adjusting the air door at the bottom of the stove, and the flame is blue.2, soup or water, containers should not be overfilled, nor unattended, so as to avoid the fire was spilled soup, water and water leakage.3, in a stew or soup, some people love the flame was very small, this can easily lead to leakage or incomplete combustion. Therefore, in the use of gas stoves, the fire can not be too small.Between the 4, and gas appliance hose inlet connector to connect closely, preferably with a pipe clip.5, in the same room, strictly prohibit the simultaneous use of two kinds of fire sources.6, the family is best equipped with dry powder fire extinguishers, so as to be prepared.
- Q: The difference between silicone tube and rubber tube
- Silicone hose is the biggest feature of resistance to temperature changes of -60 degrees to 250 degrees, but the cost is very expensive, no requirement for the hose. Compression resistant silicone hose resistant to pressure can also be.
- Q: How to identify the quality of rubber pipes for sewage treatment?
- A tubular rubber product used to transport gases, liquids, slurries, or granular material. It is composed of inner and outer rubber layer and skeleton layer. The material of skeleton layer can be made of cotton fiber, various synthetic fiber, carbon fiber or asbestos, steel wire and so on.
- Q: What kind of material does hose screw protection cover have? What are their advantages and disadvantages?
- The utility model relates to a pipe protecting sleeve, which is a new product replacing the traditional metal protecting spring used for the protection of traditional rubber hoses. Alias: hose sheath, rubber tube outside protection special nylon spiral sheath, etc..
1. Manufacturer Overview
| Location | Tianjin, China |
| Year Established | 1998 |
| Annual Output Value | Above US$ 2 Million |
| Main Markets | Mid East, Africa, Europe, America |
| Company Certifications | ISO 9001:2008； |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Tianjin; Qingdao |
| Export Percentage | 50% |
| No.of Employees in Trade Department | 300 People |
| Language Spoken: | English; Chinese; Spain; Alabic |
| b) Factory Information | |
| Factory Size: | Above 20,000 square meters |
| No. of Production Lines | 4 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Average |
Send your message to us
Hydraulic Hose SAE100 R5
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000M m
- Supply Capability:
- 80000 Meter Per Month m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
