Rubber Hose 4SP DN32
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
ID of Hose(mm) | ED of Hose(mm) | ED of Braided ply(mm) | Work Pressure(MPa) | Work Pressure(PSI) | Min Explosive Pressure(MPa) | Min Explosive Pressure(PSI) | Min Bending Radius(mm) | UnitWeight(kg/m) | UnitWeight(ib/ft) |
5+/-0.5 | 12.7+/-0.8 | 9.5+/-0.6 | 21 | 3043 | 63 | 9129 | 90 | 0.3 | 0.019 |
6+/-0.5 | 16+/-7 | 11.7+/-0.6 | 20 | 2898 | 60 | 8694 | 100 | 0.34 | 0.021 |
8+/-0.5 | 18+/-7 | 13.7+/-0.69 | 17.5 | 2536 | 52.5 | 2608 | 115 | 0.42 | 0.026 |
5+/-0.5 | 15+/-0.8 | 11.2+/-0.6 | 60 | 8694 | 180 | 26082 | 90 | 0.4 | 0.025 |
6+/-0.5 | 18+/-1 | 13.5+/-0.6 | 60 | 8694 | 180 | 26082 | 100 | 0.45 | 0.028 |
8+/-0.5 | 20+/-1 | 15.5+/-0.6 | 50 | 7245 | 150 | 21735 | 115 | 0.62 | 0.039 |
5+/-0.5 | 17+/-0.8 | 13.2+/-0.6 | 72 | 10433 | 180 | 26082 | 120 | 0.5 | |
6+/-0.5 | 19+/-1 | 15+/-0.6 | 68 | 9853 | 170 | 24633 | 140 | 0.56 | |
8+/-0.5 | 22+/-1 | 17.5+/-0.6 | 54 | 7825 | 120 | 17388 | 160 |
- Q: Between the two flanges in the middle of the rubber pipe, what is the name of the connection?
- Rubber flexible joint is also called rubber flexible joint, flexible rubber joint, flexible rubber joint, rubber shock absorber and so on.
- Q: What is the function of the rubber pipe joint and the installation pipe?
- The action of the rubber pipe joint on the installation of pipes:1. Small size, light weight, good elasticity, easy installation and maintenance.2. After installation, the transverse, axial and angular displacement of the pipe vibration can be absorbed. The pipe is not concentric and the flange is not parallel.3 、 after installation, it can reduce the noise caused by vibration of pipes, pumps and so on, and has strong vibration absorption ability.
- Q: Acid burette and burette why different structure
- Acid burette can be used frosted glass cock, convenient use, good sealing performance.
- Q: What are the matters that should be paid attention to when installing rubber hose joint in water pump?
- Installation notes:?1, Shanghai rubber pipe joint non super displacement limit at the time of installation;?, 2 installation bolts to be symmetric, gradually tightening pressure, to prevent local leakage;?3, flat, suspended, vertical installation of rubber pipe joint, actual axial displacement pressure rubber tube joints should be smaller than the pipe support, otherwise should install anti pull off device to prevent work pressure;?4, rubber pipe joints should be away from heat, ozone, no strong radiation light. Exposure and use of media that do not meet the requirements of the product;?5, rubber pipe joint in the transportation, loading and unloading, installation, no sharp instruments across the surface of the sealing surface;
- Q: Why should liquefied petroleum gas use strong rubber hose and liner?
- These gases on the rubber has a certain corrosion, swelling (not resistant to oil will speed up swelling), aging effect, liquefied petroleum, so choose rubber seal to consider oil resistance, corrosion resistance, swelling. Petroleum gas is corrosive to ordinary rubber pipes and gaskets and easy to cause air leakage. Therefore, it is necessary to use rubber pipes and gaskets with strong oil resistance.
- Q: Is it feasible to use rubber material, middle canvas layer and outer rubber material in PVC rubber tube?
- Improvement measures: 1, adjust the process, plastic material in place; mixing rubber plastic stability; vulcanized rubbing with low temperature long time vulcanization; 2, test cloth in curing temperature shrinkage coefficient is too big, consider changing cloth;
- Q: Excuse me: how can a pen with a rubber tube attract more ink?
- Pull out the iron sleeve outside the rubber tube and suck it again and again
- Q: Flexible rubber joints. What do they mean by flexing?
- Stainless steel bellows are not a kind of rubber joint.Flexure generally means that it can be bent repeatedly.The rubber joint mainly plays the axial and angular compensation displacement, and withstands the mechanical vibration, protects the pipeline not to burst.Stainless steel bellows can also be flexible, but the performance of vibration proof is better than that of rubber joints. If the requirements of the engineering drawings are rubber joints, it is better to be careful. Don't change it indiscriminately. Otherwise, the service life will be affected
- Q: Faucet hose connection problem
- The buried water pipe is outside the wire, you can use the inner home angle valve. When installing, pay attention to the rubber ring in the metal hose. The gasket should be put away. It is better to buy the transparent rubber ring and the metal hose of that kind of gasket, and pay attention to the length.
- Q: What's the difference between hose and hose for compressed air?
- In use, it is usually marked with color. For example, the intake is made of blue, and the exhaust is made red, but it is not necessary.
Send your message to us
Rubber Hose 4SP DN32
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords