Road Roller Buy S814H Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: S814H Road Roller
Parameter:
Type | Unit | S814C |
Operating weight | kg | 14000 |
Load on front drum | kg | 8200 |
Load on rear wheels | kg | 5800 |
Drum width | mm | 2130 |
Static linear load | N/cm | 385 |
Vibration frequency(Low/High) | Hz | 28/35 |
Nominal amplitude(High/Low) | mm | 1.86/0.88 |
Excitation force(High/Low) | KN | 305/225 |
Travel speed | km/h | 0~12 |
Steering angle | ° | ±33 |
Swing angle | ° | ±10 |
Theoretical gradeability | % | 55 |
Min. external turning radius | mm | 6415 |
Engine model | Cummins B5.9 | |
Engine power | kw | 110 |
Rated engine speed | r/min | 2200 |
Engine oil consumption | g/kW.h | 232 |
Hydraulic oil tank capacity | L | 240 |
Fuel tank capacity | L | 240 |
Advantages:
state-owned company
fortune 500 company
AAcustom
Why choose us?
1 sincre
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the equipment such as tower cranes, produced by CNBM are compliant with the national level quality.
2 professional
Our engineers will at your services 24hours to solve all your tower crane installation and other questions. Our goal is to provide the best professional services.
3 quality
CNBM International’s tower crane have strict quality control, only the best quality products can pass the test.
4speed
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
- Q: The vibratory roller is rolled back and forth several times at a time
- From the left to the right, or from the right to the left, roll the construction area once, as far as the lap of the previous work area is concernedGenerally,
- Q: Where is the driving wheel of the steel roller?
- Full hydraulic drive, stepless speed change, eighth generation hydraulic single drive single steel wheel roller (SSR200AC-8)
- Q: Strong earthquakes and small earthquakes can be used normally,
- Suddenly a weak is the connecting shaft bearing fault vibration wheel these problems in mechanical problems, there is a problem with this hydraulic system pressure test to determine the need to carefully check the problems in professional roller I ask
- Q: The front wheel diameter of the roller is 1.6m, and the width is 2m. What is the area of the roller that rotates for one week? M2
- Solution: it is known that the front diameter of the roller is 1.6 meters and the width is 2 meters,The front wheel is rotated for one week, the area of the roller = the front wheel's perimeter * width=3.14 * front wheel diameter * width=3.14 * 1.6 * 2=10.048 square metersA: the front wheel is rotated for one week. The area of the roller is 10.048 square meters.
- Q: What is the influence distance of the road roller on the building?
- It's a professional question. I really don't know,
- Q: Small roller, that house is of good quality
- As the car roller consists of roller, walking roller, single steel wheel and double steel roller, different products have different characteristics. Which one is good?. Each has its advantages. The important thing is to actually look at the size of the factory.
- Q: Where can I find a road roller in Yuncheng?
- What size rollers do you need, and general roller manufacturers are concentrated in some provinces and municipalities?.
- Q: Which is compact for single steel wheel roller and double steel roller?
- Single steel wheel and double steel wheel are suitable for different construction conditions, which can not be simply said which kind of compaction effect is good.
- Q: Why is the price difference so large? Is there a problem of repeated calculation?
- To meet the requirements of doing subbase filling and rolling; including earthwork backfilling, bulldozer, layered rolling to meet the design requirements of the degree of compaction, the smoothness of the road not good.No double counting, for example, road subgrade backfill, backfill compacted well, if you want to do is road subbase, rolling, if it is not just the general fill roadbed RCC.
- Q: Two grade engineer in Municipal Engineering: what does the wheel overlap overlap?
- But in order to better connect the two, the road safe covers the edge just pressed back. If the width of the edge is 30cm, then the 30 cm is the width of the wheel trace overlap. The width of the trip back and forth pressure is 5.7m. I don't know. Do you understand? I feel like this.
Send your message to us
Road Roller Buy S814H Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords