Raw Materials for Refractory:High Sodium Refractory Grade White Fused Alumina
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Specifications
White Fused Alumina ( WFA OR WA) is made from chemical by high furnace or tilting furnace at high temperature . it is very impor
White Fused Alumina
White Fused Alumina ( WFA OR WA) is made from chemical by high furnace or tilting furnace at high temperature . it is very important raw material for advanced refractory and abrasives. Its properties are as following :
Property | Size 0-1 1-2 3-5mm |
| Fine (mesh) 0-180 0-320 |
|
|
| Spec | Typical Value | Spec | Typical Vlalue |
|
a-Al2O3 | 99%Min | 99.5% | 99%Min | 99.2% |
|
SiO2 | 0.2%Max | 0.08% | 0.2%Max | 0.12% |
|
Fe2O3 | 0.2%Max | 0.01% | 0.25%Max | 0.05% |
|
Na2O | 0.4%Max | 0.23% | 0.4%Max | 0.30% |
|
Principal crystalline Phase | a-Al2O3 |
Crystal systerm | Hexzagon |
Color | White |
True density | 3.95Min |
Bulk density | 1.75-1.95 |
Mohs hardness | 9 |
Size (mm) | 85 53 31 10 |
Fine(Mesh) | -80,-120,-240,-320 |
|
- Q: A chemical problem with refractory materials
- Not necessarily. What you mean is silicate
- Q: What are the electrical fire protection materials?
- Electrical fire protection materials are the following: 1, fire proof board It is the most commonly used materials in the market, which has the advantages of fire prevention, moisture, abrasion, oil, easiness to clean, and more varieties of colors. Installed in the building exit corridors, stairs and corridors, such as fire ceiling ceiling, it can ensure that people can be evacuated safely, and to protect people from the spread of the fire. 2, fire proof door, fire proof door is divided into wooden fire door, steel fire door and stainless steel fire door. Fire proof doors are usually used for the opening of the firewall, the entrance of the staircase, the evacuation of the aisle, the openings and other parts of the pipeline, the fire prevention, playing an important role in reducing the loss of fire. 3, fire shutter It can be set in the location where it is not convient to install a fire proof wall, fire shutter generally has functions such as good fire resistance, heat insulation, smoke, compression, anti aging, wear and corrosion. 4, fireproof and mothproof wood fire wood moth is made by putting ordinary wood into the solution containing calcium and aluminum, and then into the solution containing phosphate and silicate. In this way, two ion will be undergong chemical reaction in the wood, forming materials similar to the ceramic, and filling the gap of cells and tissues, so that allowing it to have fireproof and mothproof performance.
- Q: What are the applications of refractory?
- Refractory usually refers to the inorganic non-metallic material, whose refractoriness is above 1580℃. And it can be used for necessary parts. You can search more information on the Internet. It can be used in ferrous metal metallurgy, chemical, ceramics and so on. Fire material generally refers to above 1580 ℃ refractoriness of inorganic material, where the material can be used in corrosion, the network is very strong look, we know that colored when the metallurgical, chemical-resistant ceramics, etc. of industrial production high temperature. Different things are needed in different industries.
- Q: What characteristics do A grade external wall fireproofing material have?
- 1. Save space and reduce costs; 2. Fireproofing, green and environmental protection; 3. Waterproofing; 4. Sound insulation; 5. Thermal insulation; 6. Install easily and shorten the construction period; 7. High safety performance.
- Q: What does the function of SiC for refractories?
- Anti-wear! High intensity!
- Q: what's the fire endurance of fireproof?panel?
- fire endurance of fireproof?panel generally is 3 hours. For example, 12 mm non-asbestos fiber reinforced calcium silicate board, fireproof?panel, two single 75 keel. through the monitoring of national fireproof construction materials quality supervision center, it's security and refractory time will reach over 3 hours. fireproof?panel, also called fire resistance board, scientific name is thermosetting resin impregnated paper laminated wood,english abbreviation HPL(Decorative High - pressure Laminate) is fire resistant building material for surface decoration and has rich surface colors,lines and special logistics performance, it's widely used in interior decoration, furniture, cabinets, laboratory table, external wall, etc.
- Q: What are the specific steps of stirring the steel ladle castable?
- Steps are as follows. 1 Compulsory mixer is used to stir the castable and bags, rope and other debris can not mix in the castable when stirred. 2, Castable should be unpacked on the scene. Stirred volume depends on the capacity of the mixer. Castable should be accurately measured and put into a blender. 3 The process of first dry mixing and then wet mixing is adopted. After the castable is added to the mixer, it is dryly mixed for 2 minutes, add about 5.2 to 5.5 percent of water and continue to add water while stirring. Water that is 80% of the total should be added, and then decide whether to continue to add or not depending on the consistence (noting that the water must be clean water and sewage can not be used). Then it is wetly mixed for 4 minutes and stirred for not less than 6 minutes at one time, until castable is even. In general, the bottom is slightly dry and the wall of the ladle is slightly dilute (the amount of water is only for reference). 4, The amount of water and mixing time should be controlled strictly when stirred to ensure that the needs of the consistency are met. If castable is too thin, it will seriously affect the quality of the material. The stirred volume, stirring time and water that is added should be consistent and they can not suddenly be thick or suddenly be thin. If the consistency does not meet the requirements, the castable should be put back to the mixer and stirred with appropriate water or dry materials. 5, It should be stirred evenly and casting should finish in 20 minutes, in order to avoid sclerosis, affecting structural strength of ladle lining 6, After each completion of construction, varieties of castable should be changed and the mixer should be cleaned 7, Stirring can stop in halfway. If the mixer breaks down and it can be repaired in a short time, some of the materials have to be removed before the machine is opened. If the machine can be repaired on time, castable refractory should all be removed.
- Q: What's the difference of fire-resistant material's density, specific gravity and bulk specific gravity?
- glass
- Q: What are the characteristics of clay refractory materials?
- Clay refractory has excellent performance in anti fatigue. The fatigue strength of the general metal is 50% ~ 40 of the tensile strength, and some composite materials can be as high as 70 ~ 80%. The fatigue fracture of the composite is from the matrix, which is gradually extended to the interface between the fiber and the matrix. Therefore, the composite material has omen before destruction, and it can be checked and remedied. Fiber composite material also has good performance in anti vibration fatigue. The fatigue life of The helicopter rotor made of composite material is longer that made of metal. I hope my answer will help you!
- Q: How to distinguish the fire resistant level of construction materials?
- There are 3 conditions for building components to reach fire endurance, namely: Loss of ability to support; loss of integrity; loss of fire insulation function. As long as one condition occurs, fire endurance is reached and the time before it is called fire endurance. 1), loss of ability to support: If the specimen bearing capacity and rigidity reduce, section area shrink, collapses or deformation exceeds specified numerical value because it cannot bear the load of original design under flame or high temperature, it loses the ability to support. 2), loss of integrity: It mainly refers to the thin wall separating component(such as stairs, windows,partitions, ceiling, etc.) burst or partially collapse under flame or high temperature, and penetrating?fracture or opening appears, and the reverse side even burn. For example, when the floor is under flame or at high temperature, the flame spread to the upper room, which indicates that the integrity has been damaged. 3), loss of fire insulation function: It mainly refers to that seperating components loses thermal insulation and excessive heat conduction. In experiment, if the average temperature of component unexposed surface exceeds 140 ℃, or if any spot at the unexposed surface exceed the initial temperature of 180 ℃, the component loses fire insulation function.
Send your message to us
Raw Materials for Refractory:High Sodium Refractory Grade White Fused Alumina
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
