Raw Materials for Refractory:Under 325 Mesh Calcined Alumina Powder Al2O3
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 30000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Under 325 Mesh Calcined Alumina Powder AL2O3
The main material of our refractory castable high alumina powder is Al2O3—SiC—C, there’s 2 types including baking casting material and free baking material, the width of iron runner is required above 2.4 meter, the depth is above 1.7 meter,it has a good performance in site operation, with easy repair, tapping iron is allowed after pouring finished. Although the invest is more higher for once time, but it will be with a longer service life and a few mending work. Refractory castable is the production and the most widely used a monolithic refractories.
Application:
It can be used to formulate unshape refractory material; expansive cement, self-stressing cement, addition material of chemical construction material and projects with special requirements.
aluminum oxide property:
It has higher hardness and slight lower toughness comparing with brown fused alumina. It is also characterized by its high purity, ability of self-sharpening, better cutting, less heat emit, higher efficiency, acid and alkali resistance, good thermal stability. As the abrasive materials, it is suitable for grinding high-speed, high carbon steel, as loose grains, it widely used for bonded and coated abrasives , polishing, precision casting and so on .
white fused alumina grits&powder chemical composition
aluminum oxide property:
Soluble in water white solid. Odourless. Tasteless. Qualitative very hard. Easy absorption of moisture and not ChaoXie. Both sexes oxide, soluble in inorganic acid and alkaline solution, almost insoluble in water and the polar organic solvents. The relative density (d204) 4.0. Melting point about 2000 °C.
The physical and chemical analysis:
Main standard:
Alumina(industry grade) made by slkali-lime sintered,It is white powdered crystal with low assay of Ti, Mn, Zn, Cu, V, Zr, Cr, Li, Pb, B, P, etc.It is used in the production of fused salt eletrorefining aluminium, corundum eramics, refractories and other alumina chemical products.
Product Pictures:
If you’ve any enquiry please don’t hesitate to contact us!
- Q: What are the fire endurance requirements of class A fire resistant door ?
- The fire endurance of class A fire resistance door is 1.5H, but also depends on the product quality. The filling material of class A, B, C fire doors is the same, new fireproofing material-- perlite. The difference is their thickness. The general structure is: surface panel, fireproof?board framework (filled with perlite) fireproof?board panel. !
- Q: How long is the duration of fire resistance of autoclaved flyash-lime bricks?
- The fly ash effect will continue to play a role in a considerable period of time, so the long-term strength keeps strengthening, the average age of 90 days of strength will grow 80%-100% more than the 28 days.
- Q: What's the maximum temperature that the high-temperature resistant refractory ceramic fiber cotton can endure?
- It depends on what material the ceramic fiber gasket uses. It’s usually referred to high temperature gasket made from ceramic fiber paper. It is generally classified into normalized form and high alumina type, of which the former can resist the maximum temperature of 1260℃ and its continuous use temperature is 1000℃, and the latter can be used for a long period at the temperature of 1200℃. Nichrome wire, stainless steel wire and glass fiber are reinforced. Ceramic fiber coating cloth and slag cloth, sintering ceramic fiber cloth and ceramic fiber fumigation cloth) Characteristics of the ceramic fiber cloth: It has high temperature resistance, low heat conductivity, thermal shock resistance, low thermal capacity; superior insulating property at high temperature, long service life; resistance to nonferrous metals like molten aluminum and zinc erosion; low and high temperature strength; innocuity with no adverse effect on the environment.
- Q: What are the standards of refractory concrete ?
- Heat-resistant concrete refers to the kind of concrete which remain undamaged, do not lose the necessary bearing capacity at 200 ~ 1300 ℃ high temperature for long term, and still maintain its physical and mechanical properties.
- Q: What's the difference between refractory metal raceway and fireproof raceway?
- In terms of fire protection, fireproof raceway means that it is composed of the material with certain combustion performance and generally made of flame retardant or incombustible?material. While for the refractory raceway, according to GA 479-2004 "Fire Resistant Cable Tray", its most important properties are: Fire resistance of the cable tray should meet with the following requirements: The cable tray of I grade fire resistance should keep the working time more than 60min, of II grade fire resistance should keep the working time more than 45min, and of III grade fire resistance should keep the working time more than 30min. Hope this is helpful for you! Thank you.
- Q: Does anyone know which materials belong to light fire resistant material?
- Fire partitions can be divided into organic and inorganic fire partitions, the main ingredient of organic fire partitions is organic material, which can be used for cable tray with corrosion-resistant and fire protection requirements, and the main ingredient of inorganic fire partitions is inorganic material, mainly used for fire protection. As the main component is inorganic material, it can not be use in projects with acid-resistant and alkali-resistant requirements. Of course, the price of the same amount of organic fire partitions is generally more expensive than that of the inorganic fire partitions . The fire endurance of these two products of general enterprises are 3 hours.
- Q: What refractory material does cupola lining use?
- Refractories for ehongtianlu, Yong, eajliao, najhuo cupola, refractory (refraetoriesfo:Cupola, furnace) masonry cupola and related parts. The utility model also discloses a heating furnace, which is a thermal equipment for melting pig iron in the casting industry and certain steel smelting plants. The working temperature of the guard is usually 1400 ~1 stone.. C.
- Q: what's the varieties of thermal insulation material with A level fire?rating?
- Inorganic thermal insulation material can do it, such as glass wool,rock wool,foam glass,etc. phenolic foam materials in organic foam material is special. phenolic foam not only has good thermal insulation properties but also can be composited with steel plate and other materials, A class thermal insulation materials that reach A class combustion performance include: rock (mine) wool, foam glass, EVB, etc. thermal insulation materials with A class combustion performance mainly include: phenolic aldehyde,gelatine powder polyphenyl granule, etc. thermal insulation material of fire barrier zone can use rock (mine) wool, foam glass, EVB and other materials with A class combustion performance.
- Q: The manufacturing technique of refractory material
- The major components of alkaline refractory material include magnesium oxide and calcium oxide. The commonly used alkaline refractory material is magnesia bricks. The magnesia bricks with 80%～85% magnesium oxide has good resistance to basic slag and slag and higher refractoriness than clay bricks and silica bricks. It is mainly used in open hearth, oxygen blowing of converter, electric furnace and smelting non-ferrous metal equipment and other high temperature equipment. Refractory materials applied on special occasions include high temperature oxide refractory materials such as alumina, lanthanum oxide, beryllium oxide, calcium oxide, zirconium oxide, etc., refractory compounds such as carbide, nitride, boride, silicide and sulfide, etc., and high temperature composite materials, including metal ceramics, high temperature inorganic coating and fiber reinforced ceramics, etc. Consult and find reference for efractory materials production equipment, go to http://hi.baidu.
- Q: What kinds of fireproof materials does the safe use?
- The fireproof materials of the safe, cement foam. It is often said recently that the safes with cement inside are bad. Actually, it is not like this. Chemical means are taken to make the cement inside safes rise like a leaven dough so as to achieve good insulation. The principle is the cement foam. Fireproof safes with such techniques have good performance in terms of fireproofing and anti-theft. The manufacturing processes of this fireproof safe are highly technical, some safes with poor techniques have problems in quality. Here are some data of the foam cement.
Send your message to us
Raw Materials for Refractory:Under 325 Mesh Calcined Alumina Powder Al2O3
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 30000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
