Raw Materials for Refractory:Plastic Grade Mica Refractory Powder
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 600 m.t.
- Supply Capability:
- 7000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Details: 8~20 mesh is mainly used for building materials, playing an important part in water-proof, fire-proof, heat preservation, heat insulation and decoration. 40~60 mesh is well used for filler to improve the product usability. 60~120 mesh is available for paint admixture, filler, covering agent and rubber lubricant, plastic filler. Moreover, it is also the basic materials of mica ceramics. 200~325 mesh is widely used for pearl pigment. |
1. Chemical index
SiO2 | Al2O3 | K2O | Na2O | MgO | CaO | TiO2 | Fe2O3 | PH |
44.5~46.5% | 32~34% | 0.6~0.7% | 0.53~0.81% | 0.4~0.6% | 0.8~0.9% | 3.8~4.5% | 7.8 |
2. Physical index
Heat resistance | color | Mohs hardness | elastic coefficient | transparency | Melting point | disruptive strength | purity |
650 | silver white | 2.5 | 1475.9~2092.7×106Pa | 71.7~87.5% | 1250 | 146.5KV/mm | >99% |
Mica powder can be used in paint and coating to reduce the damage of ultraviolet rays or other Light and heat damage to the paint film, promote coating acid and alkali. and insulation, and to t= strengthen its durability , freezing resistance corrosion resistance, water resistance etc. it helps to strengthen the adherence to the layer, improve its intensity, brightness, tenacity and Compaction. As a result ,it is conducive to reduce the ventilation ,to prevent speckle and chaps as well as reduce sediment in the paint. As a prior filler in paint, mica powder can be used to substitutesome expensive raw materials in the paint so as to reduce the production cost.
Mica powder is also the basic raw material for mica ceramicsproducts.
Mica powder can be applied in protecting layer of welding rods, conducting wires and electric cables.
It can be use as suspended substance in fire-fighting dry powder.
- Q:what is best for making refractory insulation for Blast furnace, hot stove.
- high alumina insulating brick diatomite?brick
- Q:how to divided the external wall thermal insulation materials fire rating
- The external wall thermal insulation materials is divided by fire rating: 1. The thermal insulation material of level A combustion performance: inorganic fiber spray coating, glass wool, foam glass, foamed ceramics, rock wool, foam cement and hole-closed perlite, etc. 2. combustion performance is level B1 insulation materials: Extruded polystyrene board (XPS) after special treatment / Special treatment of polyurethane (PU), phenolic aldehyde and gelatine powder polyphenyl granule 3, combustion performance is level B2 insulation material: Molded polystyrene board (EPS), extruded polystyrene board (XPS), polyurethane (PU), polyethylene (PE), etc.
- Q:Technical scheme of refractory for refuse incinerator
- Refractory technical index1. Physical and chemical indexes of graphite brickThe volume density (g/m3 = 1.6)The compressive strength (Mpa = 23)Apparent porosity is less than 21Ash% less than or equal to 0.5The thermal conductivity at room temperature (W/M.K = 45)200 c = 43600 C = 40800 C = 352, N-4 clay brick physical and chemical indexesRefractoriness 1690Load softening temperature of more than 1300 startThe change of reheating line is%1350 DEG C * 2H - 0.5 to +0.2Apparent porosity is less than 24The compressive strength (Mpa = 20)
- Q:What kind of refractories do the anode baking furnace use?
- Use refractory bricks.
- Q:Refractory material, refractory brick
- 1, according to the degree of refractoriness:Ordinary refractory material: 1580 ~ 1770 DEG CAdvanced refractory material: 1770 ~ 2000 DEG CSuperfine refractory material: >2000 DEG C2, depending on the shape and size of the product:Standard type: 230mm * 113mm * 65mm;No more than 4 measurements, (size ratio) Max:Min<4:1;Profile: no more than 2 concave, (size ratio) Max:Min<6:1;Or an acute angle of 50~70 degrees;Specific type: (size ratio) Max:Min<8:1;Or not more than 4 or a sharp angle; 30 ~ 50 degrees;Special products: crucibles, vessels, tubes, etc.3, according to manufacturing methods, refractory materials can be divided into:Fired products, unfired products, unshaped refractories4. classification according to the chemical properties of materials:Acid refractory material, neutral refractory material, basic refractory material
- Q:Which one is better, fire-resistant wood or steel?
- From the aspect of low-carbon and environment protection, the steel and timber structures are both OK, they are both renewable resources, the steel can be recycled and melt down again and wood can continue to be planted. Fireproof board Fireproof board is a refractory material used for surface decoration. It is widely used in interior decoration, furniture, kitchen cabinets, laboratory tables, walls, and other fields.
- Q:What brands are the best in the A-level refractory materials?
- A-level refractory materials: Dulux, Nippon, Carpoly, Skshu and Smoz. Fireproof boards are the most common materials in the market. There are two are commonly used: one is HPL decorative plastic laminates with advantages of fire- ,moisture-, wearproof and oil resistance as well as easy to wash, besides it has a great variety of colors and types. Another one is glass fiber magnesite fireproof board, the out layer of which is decorative materials while the inner layer is mineral magnesium fireproof materials which can resist a high temperature of 1,500 Celsius degree but it is not a good ornament.
- Q:What are the fire resistances of grc partition panels?
- waterproofing: It has good water resistance; 2. fireproofing: fire resistance of partition panel≥3.5h, it has an excellent fireproof performance and can be applied to fire-proof bulkhead; 3.soundproofing: According to the different thickness of walls and surface treatments, perlite light partition panels insulation can be 40-50 decibels, to ensure that products can be used for office, commercial, entertainment and residential buildings; 4, light weight:
- Q:What are the basic requirements of continuous casting for molten steel? What are the requirements for refractory materials?
- Refractories for continuous casting is an important part of the continuous casting machine, in addition to the characteristics of general refractory material, also for the purification of molten steel and improve the steel quality, stable molten steel temperature and composition, control and regulate the flow of the molten steel and other functions, so it is called functional refractories. The above is provided by the China Technology Department
- Q:What is special refractories?
- Long nozzle, slidding plate, tapping hole, stopper rods, and products that steel mills use
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Raw Materials for Refractory:Plastic Grade Mica Refractory Powder
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 600 m.t.
- Supply Capability:
- 7000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
