Raw Materials for Refractory:Down Draft Kiln Bauxite 85% CNBM China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 11 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Calcined Bauxite Description
Down Draft Kiln Bauxite 85% of CNBM in China
Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron. From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle. Very difficult to melt. Insoluble in water, soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material.
2.Main Features of the Calcined Bauxite
Down Draft Kiln Bauxite 85% of CNBM in China
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum
hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there. By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
3.Main usage of the Calcined Bauxite
Down Draft Kiln Bauxite 85% of CNBM in China
(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc.
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department.
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties.
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries.
(5) in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects.
(6) manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.
4. Calcined Bauxite Images
Down Draft Kiln Bauxite 85% of CNBM in China
5. Calcined Bauxite Specification
Down Draft Kiln Bauxite 85% of CNBM in China
Shaft kiln calcined bauxite:
Al2O3:50.0% MIN Fe2O3:3.5%MAX TiO2:4.0% MAX Cao+MgO:0.6% MAX K2O+Na2O:0.30%MAX
Bulk Density:2.5g/cm3 MIN MOISTURE:6.0%MAX
SIZE:0-1MM 1-3MM 3-5MM 0-5MM 5-8MM 0-50MM
100 MESH 120 MESH 150 MESH 200 MESH 325 MESH
6.FAQ of Calcined Bauxite
Down Draft Kiln Bauxite 85% of CNBM in China
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please connect me for samples
4). Q: Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
- Q:What is the appropiate thickness if fire resistant time for ultra thin steel structure coating is 2.5 hours?
- A level fire resistant steel structure building steel column cannot be constructed with super thin steel structure fire retardant coating, because the ultra thin steel structure fire retardant limit is less than 3 hours. Thin fire retardant coating for steel structure is water borne fireproof coatings painted on the surface of steel structure. It will form carbonized fireproof heat insulation protective layer to insulate oxygen and delay the speed of heating steel structure when it catches on fire, avioding the rapid temperature rise of steel structure and increasing its fire resistant limit. Fire resistance performance: The 2mm coating ≥ 60min, 3mm 100min.
- Q:For refractory, what is critical particle size? Thank you.
- Critical granularity means the maximum size of particles in refractory.
- Q:What is the concept of lightweight refractory material?
- Lightweight refractory material has high porosity, mechanical strength and erosion resistance. Compared with normal refractory bricks, it is a kind of refractory material with large volume shrinkage in high temperature, low thermal conductivity and small bulk density. It is used as thermal insulation material in industrial furnace and other thermal equipments. It has poor wear resistancel.
- Q:What is the requirement of refractory concrete for raw materials? What is the main principle of commercial mixing station?
- Commodity concrete stations can not be produced in general, and are made by professional fire resistant concrete manufacturers.
- Q:Does anyone know what is a lightweight refractory material?
- I am ignorant of this!!
- Q:What types of steel are silicious quicksand and chromium quicksand used in respectively?
- Chromium quicksand can be used in steel-making process that has longer refining time like LF, VD and RH, in stainless steel drainage and thin plate drainage agent. Silicious quicksand is used in short steel-making process, process that is less than 45 seconds or process without refining. You can consult Hua Heng for details or inspect it by yourself.
- Q:How many refractory materials does the annual output of 1 million tons of coke oven require?
- The production of dense synthetic Magnesium Oxide requires many steps, briefly summarized as follows:(1) Mgcl2+Ca, Mg (OH) 2, =Mg (OH) 2+CaCl2Sea salt or brine, dolomite, magnesium hydroxide, residual salt(2) Mg (OH) 2 Mg0 (low density);(3) MgO, Mgo (compact)The resulting compact Magnesium Oxide generally has a purity of up to 95%-99%, depending on the manufacturing process and the final application requirements. As shown above, Magnesium Oxide can be obtained from sea water and slaked lime. The density of the final product is through the high temperature roasting in shaft furnace and the large area obtained by calcination, and the mechanical compaction. Through the pre sintered refractory material to fundamentally eliminate the permanent contraction or extension is extremely important, it is obviously, because we cannot expect excessive contraction or extension in the use of the materials can be used to store the proper degree of molten metal or slag. The production of magnesium oxygen throughout the world (Fang Meishi) large factories in the United States, Michigan by brine well production, and by the sea water production Magnesium Oxide factory is located in Florida, Texas, California and Maryland.
- Q:Can I use ordinary cement with the addition of sand, clay, and salt as refractory material to paste the stove?
- Add some hair and slags, or it will crack before calcination.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Raw Materials for Refractory:Down Draft Kiln Bauxite 85% CNBM China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 11 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
