Raw Materials for Refractory - 83% Rotary/Shaft/Round Kiln Alumina Calcined Bauxite
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
83% Rotary/ Shaft/ Round Kiln Alumina Calcined Bauxite Raw Material for Refractory
Specifications
| Al2O3 | SiO2 | Fe2O3 | CaO+MgO | K2O+NaO | Density | TiO2 |
| 80% | 6-14% min | 2%-3% max | 0.4% max | 0.05-1% max | 2.9-3.2 | 3.5% max |
| 85% | 6-14% min | 2% max | 0.4% max | 0.05-1% max | 2.9-3.2 | 3.5% max |
| 87% | 6-14% min | 2% max | 0.4% max | 0.05-1% max | 2.9-3.2 | 3.5% max |
| 88% | 6-14% min | 2% max | 0.4% max | 0.05-1% max | 2.9-3.2 | 3.5% max |
It can be used in aluminium industry ,precision casting, refractory materials and refractory cement.Sized Sand: 0~1mm
1~3mm
3~5 mm
5~8mm
8~12mm
100mesh
180mesh
240mesh
320mesh
Characteristics:
1. Chemical stability,
2. Good physical properties.
3. High volume density.
4. High refractoriness.
5. High temperature calcination.
6. Low content of impurities.
Physical and chemical index:
Grade/Item | Chemical composition % | Bulk density g/cm³(min) | Water absorption% | ||||
AL2O3 | Fe2O3 | Ti02 | CaO+MgO | K20+Na20 | |||
GAL-88 | >=88 | <=1.5 | <=4.0 | <=0.4 | <=0.4 | >=3.15 | <=4 |
GAL-85 | >=85 | <=1.8 | <=4.0 | <=0.4 | <=0.4 | >=3.10 | <=4 |
GAL-80 | >=80 | <=2.0 | <=4.0 | <=0.5 | <=0.5 | >=2.90 | <=5 |
GAL-70 | >70--80 | <=2.0 | - | <=0.6 | <=0.6 | >=2.75 | <=5 |
GAL-60 | >60--70 | <=2.0 | - | <=0.6 | <=0.6 | >=2.65 | <=6 |
GAL-50 | >50--60 | <=2.5 | - | <=0.6 | <=0.6 | >=2.45 | <=6 |
| 1.Refractory Grade: |
Refractory grade bauxite has high refractoriness, good mechanical strength and moderate slag resistance. Bauxite in the refractory industry is typically used in ladle working lining, tundish furniture, delta sections, general perpose repairment, aluminium melting furnace and mineral processing.
| 3. Rotary calcined bauxite: |
Rotary Kiln Bauxite, as the name suggests, it is the bauxite produced by rotary kiln. there are three kinds of kilns for bauxite production mainly, rotary kiln, shaft kiln and round kiln.
| 4. Shaft kiln calcined bauxite: |
Shaft kiln bauxite, the bauxite calcined by shaft kiln. the raw material-bauxite ore is loaded from the top of kiln together with coal powder and combustion improver,the fire of calcination comes from kiln bottom, about 1300-1400 ℃After the complete calcination, the bauxite is carried out from the bottom.
Application:
1.Aluminium metallurgy.
2.Precision casting/Investment casting: bauxite grog fines can be made into mold for precision casting.
3.Refractory: high alumina bauxite's refractoriness can reach 1780°C.
It is charactered by good chemical stability and mechanical performance.(Al2O3 ≥48% with low Fe2O3)
4.Aluminium silicate refractory fiber: The high alumina bauxite grog can melt under2000°C-2200°C in the electric arc furnace. After a series of processing, it can become aluminium silicate refractory fiber, which can be made into fiber blanket,plate,cloth.
5.Mixing magnesia and bauxite grog with binders to pour the molten steel ladle for better overall lining performance.
6.Producing bauxite cement.
7.Abrasives.
8.Ceramics industry.
9.Chemistry industry for all kinds of aluminium compound.
Calcined Bauxite Grade:
Shaft Kiln Bauxite
Rotarty Kiln Bauxite
Round Kiln Bauxite
Packaging & Delivery
Packaging Details: In bulk or in 1-1.25mr bag
Product Pictures:
Our Service:
1. Your inquiry related to our products or prices will be replied in 24hours.
2. Manufacturer with large capacity, ensure the fast production cycle after confirmed the order.
3. Our professional technicians will answer your entire enquiry in patient.
4. To meet the refractory solutions, we can serve as your instructions.
5. Protection of sales area and private information for our entire customer.
If you’ve kind enquiries, please don’t hesitate to let us know. ^_^
- Q:What are the applications of refractory in petroleum?
- It can be used in chemical filler. For general process, some insulation parts also need to use refractory.
- Q:What's the fireproof specification for constrcution external wall thermal insulation materials?
- Specification for constrcution external wall thermal insulation materials: Article 1 In order to implement the "State Council opinions on strengthening and improving fire prevention work" (state issued [2011] No. 46), to standardize fireproof design and application of external wall thermal insulation materials of newly constructed, renovated, and expanded civil buildings and to prevent and reduce fire of building external wall thermal insulation materials, this provision is made in accordance with relevant national technical standards and our province real situation. Article 2 When there is no cavity between external wall thermal insulation material for exterior wall and base wall and between decorative layers, the insulation system shall comply with the following provisions: (A) Residential buildings: 1. When the building is higher than 54m, combustion performance of the thermal insulation material shall be A level; 2. When the building is not higher than 54m,combustion performance of the thermal insulation material shall be at least B level. When using B1 level insulation materials, non-combustible materials should be used to make the protective layer, and a protective layer thickness of the first floor of the building should be not less than 10mm, the other floors not less than 5mm; incombustible?materials of more than 300mm height should be used to make horizontal fire barrier zone in every floor. (B) Other buildings in addition to residential buildings
- Q:How long can gypsum board endure fire?
- Fire endurance refers to the fire-resistent limit of the whole system of light-gauge steel structure coupled with gypsum. It does nor merely refers to gypsum board. Fire endurance of the common gypsum board with the thickness of 9.5mm keeps 1.5 hours. Those gypsum board with the thickness of 12mm has a fire endurance of 3 hours.
- Q:What are the fire resistance ratings of the glass partition?
- Hello, friend. The glass partition system is composed entirely of metal structures, glass, color plate and other materials which also has fire resistance capacity. When the inner structure of the system is steel structure, the fire resistance of which is 30 mins, 60mins or even longer.
- Q:What's the definition of fire endurance of the fire-resistant coating for steel structure?
- 1. Fire endurance. Conduct fire resistance test of any building component according to the standard time-temperature curve, and the time when it is subjected to the fire to the time when it loses support capability or fire insulation function or its integrality is destroyed is referred to fire endurance. 2. Steel has relatively low fire endurance which is usually 0.25h only, namely 15 minutes; 3. Of steel structure buildings, steel can be used as beams, pillars, etc. but its fire endurance is not enough (usually these components have higher requirement on fire endurance, and take pillar as an example, it is usually demanded that the fire endurance should be 2-3h), and under this condition, it needs to brush fire retardant coating so as to raise the fire endurance. As to the specific quantity or types of the fire retardant coating, it is decided upon the actual conditions. In short, the building material needs to meet the required fire endurance of the buildings.
- Q:What are the models of bauxite with high alumina?
- China Ferrous Metal Industry Corporation released the industry standard of bauxite (YS / T78-94) in 1994. According to this standard, bauxite can be divided to sedimentary diaspore, stacked type diaspore and lateritic gibbsite. According to the chemical composition, it can be divided into nine trade marks as LK12-70, LK8-65, LK5- 60, LK3-53, LK15-60, LK11-55, LK8-50, LK7-50 and LK3-40. In addition to the provisions of chemical composition of bauxite, the standard also requires that the water of sedimentary diaspore shall not exceed 7% and water of stacked type diaspore and lateritic gibbsite shall not exceed 8%. Moreover, particle size of bauxite should be not greater than 150mm. Bauxite shall not be mixed with clay, limestone and other debris.
- Q:What are the types of advanced refractory?
- it can be divided into two categories of general and special refractories ordinary refractories by chemical properties into acidic, neutral and alkaline. Special refractory composition divided by high temperature oxide, refractory compounds and high-temperature composite materials Furthermore, according to refractoriness can be divided into ordinary refractory products (1580 ~ 1770 ℃), advanced refractory products (1770 ~ 2000 ℃) and grade refractory products (2000 ℃ above). the article can be divided into blocks (standard bricks, shaped bricks, etc. ), special shape (crucible, sagger, pipe, etc.), fibrous (aluminosilicate, zirconia and boron quality, etc.) and a random shape (refractory clay, pouring materials and ramming mixes, etc.) according to the sintering process it can be divided into sintered products, cast products, melt blown products.
- Q:Who knows about the differences between 3M fireproofing materials and ShiLiDe materials?
- Advertising materials can be divided into fireproofing and non-fireproofing ones which can not tell the differences with naked eyes. You can ask 3M to provide test reports or go to a the third party test organization SGS to do flame retardant test, maybe I can help you. Mineral wool board is harmful to human body, will lead to chronic poisoning, the quality of it is bad! You must pay attention to it! It can not be used in chemical and pharmaceutical plants.
- Q:Who knows how many poured refactory material are there?
- Pouring refractory material can be classified into the followings according to the body density: Heavy (> 2.0g\cm3), medium heavy (1.0-2.0g\cm3), light (0.4-1.0g\cm3); by binding agent: Combination of hydration, chemical binding, condensation, hydration and condensation: Clay, high alumina, silica, magnesia, alumina magnesia, magnesium and chromium, magnesium zirconium, silicon carbide etc.. Clay brick, high alumina brick, bead brick, silica brick, light mullite, alumina hollow spherical brick, oxidation zirconium hollow spherical brick, corundum brick, magnesia brick, magnesia brick, magnesia alumina spinel brick, magnesia chrome brick and so on
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Raw Materials for Refractory - 83% Rotary/Shaft/Round Kiln Alumina Calcined Bauxite
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
