QY20G.5,TRUCK CRANE, BEST PRICE AND GOOD QUALITY
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Dimension | Unit | QY20G.5 |
|---|---|---|
Overall length | mm | 12400 |
Overall width | mm | 2500 |
Overall height | mm | 3320 |
Weight |
|
|
Total weight in travel | kg | 26020 |
Front axle load | kg | 6900 |
Rear axle load | kg | 19120 |
Power |
|
|
Engine model |
| SC8DK260Q3 WD615.327 |
Engine rated power | kW/(r/min) | 192/2200 198/2200 |
Engine rated torque | N.m/(r/min) | 1100/1400 1150/1400 |
Travel |
|
|
Max. travel speed | km/h | 75 |
Min. turning diameter | m | 20 |
Min. ground clearance | mm | 275 |
Approach angle | ° | 16 |
Departure angle | ° | 13 |
Max. grade ability | % | 24 |
Fuel consumption for 100km | L | ≈35 |
Main performance |
|
|
Max. rated total lifting capacity | t | 20 |
Min. rated working radius | mm | 3000 |
Turning radius at turntable tail | m | 3.385 |
Max. lifting torque | kN.m | 860 |
Base boom | m | 10.06 |
Fully extended boom | m | 32.76 |
Fully extended boom+jib | m | 42.12 |
Longitudinal outrigger span | m | 4.97 |
Lateral outrigger span | m | 5.4 |
Working speed |
|
|
Boom luffing time | s | 75 |
Boom full extension time | s | 95 |
Max. swing speed | r/min | 3 |
Max. speed of main winch (single rope) | m/min | 100 |
Max. speed of aux. winch (single rope) | m/min | 100 |
More excellent performance
• The optimizing layout of the machine makes the stress of the main bearing carriers more reasonable, and the lifting performance is higher than the products with the same tonnage.
• Apply the mature jib technique which integrates plug-in boom head, embedded boom block, and special telescoping mechanism, which makes the jib more stable and reliable.
• Optimize the stress design. Adopt the box-type outriggers which have larger span, stronger rigidity, and better stability.
More reliable quality
• Adopt the classic K series jib telescoping technique, working safer and more reliable.
• Make the most complete safety device system in the industry, ensuring the lifting safer and more reliable.
• The comprehensively upgraded brake system adopts double circuit air pressure design. Multiple systems ensure the brake safety of the truck during travel.
• The intensity and rigidity of the rotary table and frame structure with high rigidity are completely coordinated.
• The perfect integration of the design and structure realizes the automation of welding, which is more reliable.
Easier to maintain
• The optimizing design of the pipeline traces makes the layout more scientific and reasonable, greatly reducing the dismantling and installing time of the pipelines and the maintenance expense.
• Completely upgrade the electrical system. Adopt anti-creep connector clips, greatly prolonging the service life of the parts.
• Adopt K series rope anti-disorder technique, improving the lifting efficiency, reducing the labor intensity, and prolonging the service life of the steel rope.
• The telescoping steel wire rope oriented and protective device avoids the steel wire rope out of the track and broken.
More energy-efficient and environmental friendly
• Adopt double industrial automation control engine, featuring strong power and energy efficiency.
• Under the economical mode, it can meet the engine power requirement of the normal lifting work. Under the high power mode, it can meet the requirement of the high challenge and high efficient lifting work.
• Adopt the advanced matching technique, which makes the design more scientific. It can reduce the consumption of the mechanism, prolong the service life of the machine, and has high residual value.
- Q: i know not to eat much when trying to decrease the size of your tummy, so don't bother mentioning it.
- Do sit-ups. Without exercise machinery, that's probably the best exercise you can do. Even with machines, it's still probably one of the best. It strengthens your abdominal muscles, and you can probably get a six-pack if you work hard enough. ;-)
- Q: Any one no og some good pec exercises i can do without machinery or equpitment? i no of the obv. push up but i was thinking more of like a seated work out thx
- SQUEEZE YOUR HANDS TOGETHER AS HARD AS YOU CAN FOR A CERTAIN AMOUNT OF TIME AND DO IT REPEATEDLY FOR LIKE 3-5 TIMES. OR YOU CAN ALWAY DO DUMBELL BUTTERFLIES??
- Q: I swore into the Navy and i chose MR over a few other jobs, the other jobs sucked and they said this was the better one of them all. Do you know where MR's are usually stationed and if its a cool job? thanks
- It's ok. As an MR, your job is to become proficient in the operation of heavy machinery and damage control equipment. Specifically, you will become skilled in working a lathe and die set to manufacture small parts and things for the ship (and you will be stationed on ship-MR is a sea-intensive rate). You also will make a lot of name tags and Bakelite placards, since you own the engraving machine. With the caveat that my experience is all small boy (FF/DDGs), here are the pros/cons of the job. Pros-learn really technical skills that can come in handy throughout life. Work with your hands. People want to be friends with you so you can hook them up with placards. Usually one of only a few on a ship-you as one man (or woman) can make a lot of difference. Cons-Work as part of Repair Department/Division, normally a pretty screwy, unorganized mess of a unit. Lots of knowledge-have to learn the DC/HT job as well. Especially on small boys, have to contribute to Engineering Department manning/watch, lots of work there. It's not a bad rate, but it is a lot of work, like everything else in the Navy.
- Q: What's the level of the construction machinery in China?
- Listen to one of my friends said, the secondary market is not on the selling price of domestic excavator. Buy imported, do not go to the secondary market or sell
- Q: How do the proteins of the transcription machinery access DNA that is tightly associated in chromatin?
- Chromatin is tightly condensed to chromosomes only during mitotic/meiotic phases and not all the time. In your body, right now there are several cells which are not dividing and hence the DNA is freely available coiled around histone proteins. Transcription machinery access DNA by unwinding DNA from histones (histone deacetylases) initially. Later DNA gyrase unwinds the coiled DNA (like zip open) where the transcription machinery acts.
- Q: We found this little shed right outside Virginia City, NV.Inside was this old machinery.. it was probably used for mining.
- Yep, it looks like a winch to me too. I see a second drum, so perhaps it was a winch that could pull a cable in two directions, with the cable looped around a pulley at some distant point and being wound onto one of the drums as it is unwound from the other. (hard to see the gearing, etc., from that image). As for age, that electric motor looks like it's about 100 years old! (just a wild guess, of course)
- Q: should no Fundy be allowed to drive/ operate heavy machinery in case they're Raptured suddenly?
- That's an interesting, and disturbing thought. I wonder if they should be allowed to smoke cigarettes, as a dropped cigarette can cause a serious fire. Pumping fuel, too, in fact any activity involving potentially dangerous substances, the operation of machinery, and even holding small children should become proscribed acts, immediately. This is a serious safety issue!
- Q: a.mRNAb.tRNAc.translation factorsd.ribosomese tein polymerase
- e. protein polymerase
- Q: I enlisted in the navy and choose to Machinery Repairmen (MRs) for my rating. It seems good and I felt confident to do the job because I qualified for it in the first place. I'm just worried because I know nothing about it beforehand. Will I be taught everything I need to know to become a MR? I know that nor every job is easy in the navy but is this particular rating hard? I'm looking forward to becoming a (MR). I really want to have a great career in the Navy and I want to be able to perform my job up to standards.
- I've always thought MRs were the expert fixers and fabricators on the ship; really good at making things. It's a rating that requires lots of skill to it to make worse. If you like lathes, you're in luck. They'll teach you everything you need to know in A-school. It's a hard rating because it's an engineering rate, so lots of hard work associated with it. Advancement is easy up to second class, then impossible beyond that.
- Q: A certain piece of machinery was purchased 5 yr ago by Garland Mills for $470,000. Its present resale value is $280,000. Assuming that the machine's resale value decreases exponentially, what will it be 3 yr from now? $___________.thanks
- decreases exponentially: A_t = A_0 e^(kt) A_0 = original value A_t = value at time t t = time elapsed from original value k = coefficient of growth/decay (or something like that) e = 2.718... using time, your original value, and current value, find k. from there, find A_t three more years down the road. units don't matter as long as they're consistent. and, your answer should make sense according to the context; i.e. less than $280000. hope this helps
Send your message to us
QY20G.5,TRUCK CRANE, BEST PRICE AND GOOD QUALITY
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
