Plastic Tubes - PVC Tubes UPVC Drainage Pipes with Good Quality on Hot Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:Are plastic tubes suitable for electrical conduit?
- No, plastic tubes are not suitable for electrical conduit. Electrical conduit needs to be made of materials that are fire-resistant, durable, and able to withstand high temperatures. Plastic tubes are not able to meet these requirements, making them unsuitable for use as electrical conduit.
- Q:What is the minimum wall thickness for transparent plastic tubes?
- The minimum wall thickness for transparent plastic tubes can vary depending on the specific type of plastic being used and the intended application. However, in general, the minimum wall thickness for transparent plastic tubes is typically around 0.5mm to 1mm.
- Q:Are plastic tubes suitable for beverage dispensing?
- Yes, plastic tubes are suitable for beverage dispensing. They are commonly used in the food and beverage industry due to their durability, flexibility, and resistance to chemical reactions with various liquids. Plastic tubes also offer ease of cleaning and maintenance, making them a practical choice for beverage dispensing systems.
- Q:How do you store plastic tubes to prevent damage?
- Plastic tubes can be stored to prevent damage by keeping them in a cool, dry place away from direct sunlight and extreme temperatures. It is advisable to arrange them vertically or suspend them horizontally to avoid bending or warping. Additionally, using storage racks or compartments can help organize and protect the tubes from accidental impacts or crushing.
- Q:i finally bought a new faucet, and changed it. it seems that there is no more leaking from the faucet.but now, it seems that there is some water leaking right under that white plastic screw. around the plastic looking tube. inside of it, there is a dark rubber kind of ring around it. i can't take out the white plastic screw (i don't know the those special names.) otherwise, i will just put some plastic tape, and seal it. that shouldn't be so hard. so my question is 1. what do you recommend? should i buy a new tube? or is there any other way to fix this thing?extra question.2. the new faucet has the top iron thing and a black plastic base. i put the plumb's putty on the edge of top and bottom of the black plastic base. i am thinking what if there are some water leaking inside of the faucet, if i sealed the whole plastic base, the water will accumulate inside of it. did i do the right thing at all?
- Time to start over. The only place that you should sue plumber's putty is where the drain goes into the sink. On any connection that you have water running through, that will have pressure, you will need to use what is known as pipe dope. the spot that is leaking should only leak if the seal is broken. In which case, just go buy another one. If you bought the pipe dope, and new lines for both sides, you will spend less than $20. The supply line that you have in the pic seems to be relatively new, but it is possible that the seal can be damaged.
- Q:What are the common diameters of plastic tubes?
- The common diameters of plastic tubes can vary depending on their intended use, but some common sizes include 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, and 1 inch.
- Q:What is the expansion joint in the drain pipe?
- In order to protect the pipeline in the heat up and cold contraction of the pipeline will not damage, in the case of guaranteed leakage, the pipe expansion, contraction, play a regulatory role in order to avoid the pipe was broken or burstExpansion joint from the material, there are rubber expansion joint, stainless steel expansion joint, carbon steel expansion joint
- Q:Can plastic tubes be used for transporting powders?
- Yes, plastic tubes can be used for transporting powders. Plastic tubes are commonly used in various industries, including pharmaceuticals, food processing, and chemicals, due to their durability, flexibility, and resistance to corrosion. These tubes can effectively transport powders, ensuring efficient and safe handling of the materials.
- Q:Can plastic tubes be used for pet food packaging?
- Yes, plastic tubes can be used for pet food packaging. They are commonly used for packaging various types of products, including pet food. Plastic tubes offer durability, flexibility, and can be easily customized to meet specific packaging requirements. They provide a convenient and efficient way to store and dispense pet food, ensuring its freshness and quality.
- Q:im looking for a place to buy a small piece of latex tubing maybe about a foot long. i checked local pharmacy and drug stores with no luck. any other suggestions?
- plastic tubing is available at the hardware giants ... all sizes and by the foot price .... finding latex may be difficult ....
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Plastic Tubes - PVC Tubes UPVC Drainage Pipes with Good Quality on Hot Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords