Plastic Tubes - PVC Tubes UPVC Drainage Pipes from China on Sale with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5< span="">
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: Are plastic tubes lightweight?
- Yes, plastic tubes are generally lightweight due to the lightweight nature of the material itself.
- Q: Can plastic tubes be used for labeling products?
- Yes, plastic tubes can be used for labeling products. They can be easily customized and attached to various items, providing a convenient and efficient way to display important information such as product names, descriptions, and barcodes. Plastic tubes offer durability and versatility, making them suitable for labeling a wide range of products in different industries.
- Q: Why is the concrete wall filled with long and thin white plastic pipes?
- Mass concrete produces a lot of heat when it is solidified and must be released. Otherwise, it is easy to crack, so it is ventilated and cooled, but this possibility is the least. We usually use steel pipe.
- Q: I have a 1 year old Robo hamster named Jewel. She has PLENTY of food (slightly chubby lol) and things to chew on..yet she is chewing on the plastic hamster tubes? She lives in a 10 gallon tank and has a silent spinner and toys (and a hut) 1.can she chew THROUGH the tube and escape? 2.can this hurt her health?
- Hamster Video Tube
- Q: I have a little bit of a project. I'm trying to figure a way to cool a pair of water filled tubing lines. I was thinking to wrap it with some type of cooling device but not quite sure what to use. Can you guys give me some ideas? I want to cool the lines as cool as refrigerator temps. Thanks.
- You have not said how much heat you need to disperse - whether it needs to be a continuous process or not. You have not mentioned whether the lines are flexible or what length they are! However, without making things too complicated, if you use a longish length of plastic tubing, you could coil them and run them through a bucket full of an ice/salt/water mixture. Depending on how fast the water is moving through the tubes, if you had a strong mixture of salt and ice - with just enough water in the bucket to allow conduction - you might be able to freeze the water in the tubes - which is probably NOT what you want to do. So experiment before the performance.
- Q: A meat baster consists of a squeeze bulb attached to a plastic tube. When the bulb is squeezed and released, with the open end of the tube under the surface of the basting sauce, the sauce rises in the tube to a distance h, as the drawing shows. It can then be squirted over the meat.Using 1.013e+05 Pa for the atmospheric pressure and 1100 kg/m3 for the density of the sauce, find the absolute pressure in the bulb when the distance h is each of the following.(c) h = 0.140 m Pa=?(d) h = 1.10 10-1 m Pa=?
- What's up, just wanted to mention, I loved this discussion. very valuable answers
- Q: I make models and the plastic that winds up in the trash could be reused if only I knew how to glue it. I have tried all of mine (401, epoxy, Loctite, Gorilla Glue, etc) to no avail.
- I use E-6000 clear glue for almost everything. I am a sewer and needed some weights so I used this glue on huge metal washers putting two of them together for more weight. I have had these weights for quite a few years. The trick to this glue is to let is set. According to the label is it flexible, paintable, non-flammable, waterproof, safe for photographs, etc. I would suggest not using this in an enclosed area for any length of time. Good luck - Hope that helps.
- Q: Are plastic tubes suitable for hydrostatic pressure testing?
- Yes, plastic tubes can be suitable for hydrostatic pressure testing. Plastic materials such as PVC, polyethylene, and polypropylene are commonly used for this purpose due to their strength and ability to withstand high pressure. However, the suitability of plastic tubes depends on various factors like the specific type of plastic, thickness, and intended pressure levels. It is important to consider the properties and limitations of the plastic material before conducting hydrostatic pressure testing.
- Q: i connected a plastic tube about 7 or 8 inchs long onto a butane can im wondering if when i push down on the can and put a match near it can the fire go back into the can and make the can explode and if so how can i stop that from happening and y would it happened
- The fire in this case is a reaction between butane from the can and oxygen from the air. If either one is missing, there can be no fire. The fire cannot propagate back up the tube, since the tube will be filled with pure butane, meaning there will be no oxygen in the tube.
- Q: What is the maximum diameter-to-length ratio for plastic tubes?
- The maximum diameter-to-length ratio for plastic tubes can vary depending on the specific type of plastic and the intended application. However, generally speaking, plastic tubes typically have a maximum diameter-to-length ratio of around 10:1.
Send your message to us
Plastic Tubes - PVC Tubes UPVC Drainage Pipes from China on Sale with Good Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 kg
- Supply Capability:
- 1000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
