Plastic Tubes - PVC Tube PVC Hose with CE Certificate for Agriculture Greenhouse
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m
- Supply Capability:
- 999999000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PVC Tube PVC Hose With CE Cetificate for Agriculture Greenhouse
Description of PVC tubes are PVC resins HDPE pipes and UPVC pipes for Agriculture Greenhouse
PVC tubes are PVC resins through plastic extruder and molding plasticize and form. It has a lot of advantages like light weight, long length, small resistance of water transportation, corrosion resistance, better aging resistance, and convenient construction and so on. It has been widely used in the projects of low–pressure conveyance of water irrigation technology. The product has great advantages in energy-saving, environmental protection, economic and practical aspects and is the replacement for the traditional material.
PVC Tube PVC Hose With CE Cetificate for Agriculture Greenhouse
The specification of HDPE pipes and UPVC pipes for Agriculture Greenhouse
Part No. | Inch Size | I.D | O.D | Thickness | W.P. | B. P. | Length |
inch | mm | mm | mm | bar | bar | m/roll | |
GNSD20-22.7 | 3/4" | 20 | 22.7 | 1.35 | 7.0 | 21.0 | 100 |
GNSD20-23.1 | 3/4" | 20 | 23.1 | 1.55 | 10.5 | 31.5 | 50 |
GNSD26-28.6 | 1" | 26 | 28.6 | 1.30 | 4.0 | 12.0 | 100 |
GNSD26-29.0 | 1" | 26 | 29 | 1.50 | 7.0 | 21.0 | 100 |
GNSD26-29.4 | 1" | 26 | 29.4 | 1.70 | 10.5 | 31.5 | 50 |
GNSD33-35.4 | 1-1/4" | 33 | 35.4 | 1.20 | 4.0 | 12.0 | 100 |
GNSD33-35.6 | 1-1/4" | 33 | 35.6 | 1.30 | 7.0 | 21.0 | 100 |
GNSD33-35.9 | 1-1/4" | 33 | 35.9 | 1.45 | 10.5 | 31.5 | 50 |
GNSD41-43.5 | 1-1/2" | 41 | 43.5 | 1.25 | 5.0 | 15.0 | 100 |
GNSD41-43.9 | 1-1/2" | 41 | 43.9 | 1.45 | 7.0 | 21.0 | 100 |
GNSD41-44.8 | 1-1/2" | 41 | 44.8 | 1.90 | 10.5 | 31.5 | 50 |
GNSD45-48.2 | 1-3/4" | 45 | 48.2 | 1.60 | 8.0 | 24.0 | 50 |
GNSD45-49.0 | 1-3/4" | 45 | 49 | 2.00 | 10.5 | 31.5 | 50 |
GNSD53-55.0 | 2" | 53 | 55 | 1.00 | 4.0 | 12.0 | 100 |
GNSD53-55.6 | 2" | 53 | 55.6 | 1.30 | 6.0 | 18.0 | 100 |
GNSD53-56.0 | 2" | 53 | 56 | 1.50 | 8.0 | 24.0 | 50 |
GNSD53-57.1 | 2" | 53 | 57.1 | 2.05 | 10.5 | 31.5 | 50 |
GNSD66-68.3 | 2/1/2" | 66 | 68.3 | 1.15 | 4.0 | 12.0 | 100 |
GNSD66-69.4 | 2-1/2" | 66 | 69.4 | 1.70 | 7.0 | 21.0 | 100 |
GNSD66-70.3 | 2/1/2" | 66 | 70.3 | 2.15 | 10.5 | 31.5 | 50 |
GNSD78-80.1 | 3" | 78 | 80.1 | 1.05 | 4.0 | 12.0 | 100 |
GNSD78-80.9 | 3" | 78 | 80.9 | 1.45 | 6.0 | 18.0 | 100 |
GNSD78-82.5 | 3" | 78 | 82.5 | 2.25 | 9.0 | 27.0 | 100 |
GNSD78-83.0 | 3" | 78 | 83 | 2.50 | 10.0 | 30.0 | 50 |
GNSD104-106.4 | 4" | 104 | 106.4 | 1.20 | 4.0 | 12.0 | 100 |
PVC Tube PVC Hose With CE Cetificate for Agriculture Greenhouse
The advantages of HDPE pipes and UPVC pipes for Agriculture Greenhouse:
The PVC tubes have both advantages of HDPE pipes and UPVC pipes which are easy to be installed and maintained. And the PVC tubes’ price is lower than HDPE pipes. So it has greater future than UPVC, HDPE pipes.
PVC Pipes With CE Cetificate for Agriculture Greenhouse
Application of PVC Tube PVC Hose With CE Cetificate for Agriculture Greenhouse
Indoor water supply system for civil and industrial constructions
Underground water supply system for community and factories
Urban water supply piping system
Water pipeline system in water treatment plants
Marine culture, garden irrigation and agricultural irrigation
Drilling engineering and other industrial tubes
PVC Tube PVC Hose With CE Cetificate for Agriculture Greenhouse
FAQ
1.What kind of products do we produce?
The main productions of company are dripping irrigation tubes, sprinkling irrigation equipments,filter, fertilizing system, pipe fitting, tubes, and developments of new technology.
And meanwhile the company can provide customer the technology consultation and service for integratedwater and fertilizer solution.
2.which kind of certificate we have ?
ISO9000 certification is company’s management foundation. The all indicators of productions reached national standard after detecting by Ministry Water Resources Irrigation and Drainage Center and the company obtained the irrigation level II qualification.
3. what is the payment term ?
We accept LC ,TT etc .
- Q: Can plastic tubes be used for fire extinguishing systems?
- Yes, plastic tubes can be used for fire extinguishing systems. However, it is important to note that the type of plastic used must be fire-resistant or fire-retardant to ensure the safety and effectiveness of the system.
- Q: the tube is a 24 inch tube how do i use it onit?
- Read the directions that came with it.
- Q: My 99 Ford Escort has been making sloshy water sounds and whistling sounds on the passenger side of the car when I run the A/C. I have also noticed that the floor is damp on the passenger side only. If I look up under and behind the glove compartment there is a black plastic box that is covered with condensation within a few minutes of running the a/c. Based on what I've read, this problem is probably a blocked drain rather than the heater core (I live in Florida and haven't touched my heater in 6 months :P). Can anyone confirm? The noise has also been getting worse, I noticed the damp floor a week or two ago, but the water noises have only kicked up the past 2 days. Will running the a/c without fixing it permanently damage anything? If I can't locate the drain to unblock and have to take it into the mechanic, how much would I be looking at? Thanks!
- Bigrick has it right. But use a coathangar for the wire, and fold it in half. Use the rounded end to snake the drain tube out. That way if you do go too far in or slip or whatever, you won't put a hole in the evaporator core. It is extremely thin for heat transfer, and is easily punctured. The rounded end of a folded coathangar will not damage it in anyway, and is safe. Just watch for the waterfall that will come rushing out!!!!!!
- Q: How can the pipe support for water supply and drainage be calculated?
- The support of a drain pipe is contained in a pipe and is usually not counted
- Q: can you use rubber tubing to make moonshine?
- It's fine to use rubber. That other guy doesn't know what he's talking about.
- Q: ...little grinding bits come in.The seal can be O.D. or I.D. and needs to slip on and off fairly easy, just like the seals in the tubes that contain the littler grinding bits Dremel makes.
- 1 piece of heat-shrink tubing to insulate your solder connection between EL wire and stereo wire (RadioShack) 1/2 6x32 clear polycarbonate screw to hold end bushing in (this is a recent addition, because the end bushings have come out of some of my blades when they are dueled with. However, these are rather expensive, as screws go. I think I payed about $10 for 50 screws.) hot glue, or silicone for end of blade super glue to glue in top and bottom bushings Note: I don't really like RadioShack all that much. I have a much better electronics store locally that I use that has a better selection and cheaper prices, but you can't order from them online, so I know you should be able to find what you need at RadioShack) That's just for the blade.
- Q: Can plastic tubes be used for pneumatic applications?
- Yes, plastic tubes can be used for pneumatic applications. Plastic tubes are often used in pneumatic systems due to their lightweight, flexible, and durable properties. They can effectively transmit compressed air or gases and are resistant to corrosion. However, it is important to consider the specific requirements of the application and select a plastic tube material that is suitable for the desired pressure, temperature, and chemical resistance.
- Q: Our Kenmore washing machine #110.2970091 recently started leaking water from underneath. When we looked, there was a clear plastic bag/tube attached to a hole on the side of the tub that was leaking.The tube was taped up at the bottom and doesn't look like it's supposed to be there, the water in it looked like it was there awhile. We bought this used so it doesn't have a manual or warranty. If it is an overflow pipe, where is the excess water supposed to go? We have it hooked up to the laundry sink.Thanks
- first element i could do is examine and make useful the drain hose is inserted perfect. whether this is, and you nonetheless have overflow, you ought to have some blockage interior the drain that became no longer observed including your previous washer by using fact it did no longer pump water into the drain as rapid. in case you're mushy doing so, attempt and sparkling the blockage. in case you haven't any longer any thought the thank you to accomplish that, call a plumber.
- Q: Explain using the kinetic theory of matter.
- Metal tubes are not necessarily better suited. It is application dependant. They are more robust meaning in general they can support more pressure. Copper is an excellent thermal conductor. Plastic is lighter à, can flex much more… If weight is no issue, then for sure go with copper! It also depends on very many factors like temperature, pressure, chemical compatibility... Hope this properly answers your question Guru
- Q: Can plastic tubes be used for architectural models?
- Yes, plastic tubes can be used for architectural models. Plastic tubes provide a versatile and lightweight option for creating various architectural elements such as structural columns, pipes, or even complex geometries. They can be easily cut, shaped, and assembled to represent different architectural components in a cost-effective manner. Additionally, plastic tubes can be transparent, allowing for the inclusion of internal details or for the use of lighting effects in the model.
Send your message to us
Plastic Tubes - PVC Tube PVC Hose with CE Certificate for Agriculture Greenhouse
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m
- Supply Capability:
- 999999000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords