Plastic Tubes PVC Garden Hose for Greenhouse Irrigation
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m
- Supply Capability:
- 999999000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PVC Garden Hose
Description of PVC Garden Hose for Greenhouse :
Inner and outer PVC layer with polyester fiber reinforcement embedded. Size:PVC garden hose with bigger diameter can deliver more water.The typical sizes for garden hose include 3/8inch,1/2inch.5/8inch.3/4inch and 1inch varieties.The most commonly used ones are the 1/2”, 3/4 inch and 5/8 inch.
Features of PVC Garden Hose for Greenhouse:
1.Made from durable PVC material.It is scratch and cut resistant and can withstand harsh weather
2.The fiber reinforcement typically increases resistance to pressure.
3.Beautiful appearance and any color are available at your request.
Temperature range:--5~65℃(23~149℉)
The specification of PVC Garden Hose for Greenhouse
Part No. | Inch Size | I.D | O.D | Thickness | W.P | B.P. | Length | Weight | Volume |
inch | mm | mm | mm | bar | bar | m/roll | kg/roll | m3/roll | |
GNHYG10-14 | 3/8" | 10 | 14 | 2.0 | 8 | 24 | 100 | 10.2 | 0.035 |
GNHYG12-16 | 1/2" | 12 | 16 | 2.0 | 5 | 15 | 100 | 11.5 | 0.045 |
GNHYG12-17 | 1/2" | 12 | 17 | 2.5 | 6 | 18 | 100 | 14.8 | 0.048 |
GNHYG13-17 | 1/2" | 13 | 17 | 2.0 | 6 | 18 | 100 | 12.5 | 0.048 |
GNHYG13-18 | 1/2" | 13 | 18 | 2.5 | 6 | 18 | 100 | 15.8 | 0.052 |
GNHYG16-20 | 5/8" | 16 | 20 | 2.0 | 5 | 15 | 50 | 7.5 | 0.035 |
GNHYG16-21 | 5/8" | 16 | 21 | 2.5 | 6 | 18 | 50 | 9.5 | 0.038 |
GNHYG19-24 | 3/4" | 19 | 24 | 2.5 | 5 | 15 | 50 | 11.0 | 0.045 |
GNHYG19-25 | 3/4" | 19 | 25 | 3.0 | 5 | 15 | 50 | 13.5 | 0.048 |
GNHYG25-30 | 1" | 25 | 30 | 2.5 | 3 | 9 | 50 | 14.0 | 0.093 |
GNHYG25-31 | 1" | 25 | 31 | 3.0 | 3 | 9 | 50 | 17.1 | 0.093 |
Applications of PVC Garden Hose for Greenhouse:
Water conveyance,garden irrigation and general domestic water applications.
Advantage of PVC Garden Hose for Greenhouse:
SGS report for PVC Garden Hose, which comply with RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
Tips for choosing suitable PVC garden hose:
Size:PVC garden hose with bigger diameter can deliver more water.The typical sizes for garden hose include 3/8inch,1/2inch.5/8inch.3/4inch and 1inch varieties.The most commonly used ones are the 1/2”, 3/4 inch and 5/8 inch.
Length:The typical length ranged from 15 to 50m. You need to purchase the PVC garden hose with a length that’s just right for your requirements..A shorter hose may not be used at all,and much longer hose are quite heavy and difficult to move around the garden.The weight of very long hose could also cause damage to structure when stored on a reel.
Package: wrapped by plastic film or customized.
FAQ
1.What kind of products do we produce?
The main productions of company are dripping irrigation tubes, sprinkling irrigation equipments,filter, fertilizing system, pipe fitting, tubes, and developments of new technology.
And meanwhile the company can provide customer the technology consultation and service for integratedwater and fertilizer solution.
2.which kind of certificate we have ?
ISO9000 certification is company’s management foundation. The all indicators of productions reached national standard after detecting by Ministry Water Resources Irrigation and Drainage Center and the company obtained the irrigation level II qualification.
3. what is the payment term ?
We accept LC ,TT etc .
- Q: I was given an Mellita One:One coffee maker and I noticed when inter running it through a cycle it would leak all the water through the bottom. So I opened it up and noticed that one part of waterpump tubing is not attached so I attempted to use super glue to reattach it. So do you think it will hold during use?
- Only one way for sure to find out, try it!
- Q: This machine would be used for sealing plastic tubing used in packaging soft drinks
- These are complicated electro mechanical devices.Another way would be to look at any patents filed explaining the principles of operation and come up with your own simplified designs that you may be able to build yourself, or get built for you.
- Q: How do you prevent plastic tubes from becoming brittle in cold weather?
- One way to prevent plastic tubes from becoming brittle in cold weather is by using materials with higher flexibility and impact resistance, such as PVC or polyethylene. Additionally, insulating the tubes or providing them with protective covers can help maintain a more stable temperature and prevent extreme cold exposure.
- Q: How do plastic tubes compare to ABS tubes in terms of impact resistance?
- In terms of impact resistance, plastic tubes generally offer lower resistance compared to ABS tubes. ABS (Acrylonitrile Butadiene Styrene) tubes are known for their superior impact resistance, making them more resilient to accidental drops or heavy impacts. Plastic tubes, on the other hand, may be more susceptible to cracking or breaking when subjected to the same level of force.
- Q: What is the name of the clear plastic tube like thing you can fill with water, and then squeeze gently to let a stream of water clean out the area where a tooth was recently removed?
- You can use either of the following : 1. A syringe. Usually the dentists give you a syringe without a needle. The one that is commonly given out is the monoject syringe that has the tip built into it with a slight curve. That means it is a one piece plastic syringe with the dispensing tip and a plunger. 2. You can also use a WaterPik or Water Jet Hope this helped :)
- Q: Just curious, when there is only a bit of toothpaste left, I have to squeeze little by little from bottom up. But then after using it, I'll have to do the same thing next time around. Obviously the toothpaste has to settle down the tube. Why and how does it do that?
- The plastic material has internal stresses that retain the shape it was cast in originally. Since it is attached to a round head it tends to form a sort of flattened cone. The toothpaste moves back up the tube to fill the available space as it is a type of really thick fluid. The shape may also lead to the toothpaste moving upwards due to capillary action (similar to how water moves up a very thin straw) To combat this effect, you can buy a little squeezy thing that rolls over the tube to prevent the toothpaste from moving backwards, or you can fold/bend it over as you use it like many people do. I store mine upright on the cap so the toothpaste settles at the end I squeeze it out of. The tube also uses less counter space when you store it upright as compared to laid over on its side.
- Q: I'm looking to start a business plastic coating oilfield tools just needing a little more info of anyone out there had any good ideals or a way of doing this I'm already working on the shop remodeling it ....
- Harbor Freight Tools: $70 for the gun, $5 for the coating powder, $500 for a small oven. Read up, I thought I heard where you can use a converted household oven for small parts.
- Q: Are plastic tubes suitable for use in the pharmaceutical packaging industry?
- Yes, plastic tubes are suitable for use in the pharmaceutical packaging industry. They offer numerous advantages such as being lightweight, durable, and cost-effective. Plastic tubes can provide proper protection for pharmaceutical products, maintaining their quality and extending their shelf life. Additionally, they offer flexibility in design and can be easily customized for specific packaging requirements.
- Q: Gravity head available = 80` -- Please advise.
- Pressure Drop Online-Calculator Calculation output Flow medium:Water 20 °C / liquid Volume flow::34.95 gal/min Weight density:998.206 kg/m? Dynamic Viscosity:1001.61 10-6 kg/ms Element of pipe:circular Dimensions of element:Diameter of pipe D: 2 in. Length of pipe L: 3000 ft. Velocity of flow:3.57 ft./s Reynolds number:55078 Velocity of flow 2:- Reynolds number 2:- Flow:turbulent Absolute roughness:.03 mm Pipe friction number:0.02 Resistance coefficient:404.69 Resist eff.branching pipe:- Press.drop branch.pipe:- Pressure drop:4992.72 lbw./sq.ft. 34.67 psi Based on my experience with real systems, 30 - 35 gpm seems reasonable for a 2 pipe with 35 psi pressure drop. A 1.5 inch pipe will give much less, a little over half as much, as a 2 pipe.
- Q: Suppose I take a plastic tube and some insulated wire and wrap the wire very tightly around the plastic pipe so that the pipe is covered with several layers of wire wrap. The wire is always wrapped around the pipe in the same direction. Then we connect the two ends of the wire together. If I then drop a strong magnet down this pipe arrangement, will the magnet fall slowly, or not?
- It depends on a number of factors. The winding direction, the polarity, and how you drop the magnet. The only real way to know is to experiment.
Send your message to us
Plastic Tubes PVC Garden Hose for Greenhouse Irrigation
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m
- Supply Capability:
- 999999000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
