PVC Suction Hose Plastic Tubes
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 2000PCS kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PVC SPIRAL SUCTION HOSE
1: Specification :
Standard ID: 1/2"----16" (12mm-400mm)
Temprerature: -10°C-65°C
Standard Length : 30m/rol
Color: any color
suitable for conveying water ,powder ,grain,and oil, etc, in the industry ,agriculture,irrigation and civil engineering, it is the ideal alternative for the rubber and metal pipe.
Inch | I.D mm | O.D mm | Weight KG/m | W.P Mpa | B.P Mpa | Length m/roll |
5/8 | 14 | 18 | 0.137 | -0.1~0.4 | 1.0 | 20 |
3/4 | 19 | 24 | 0.229 | -0.1~0.4 | 1.5 | 20 |
1 | 25 | 30 | 0.294 | -0.1~0.4 | 1.5 | 20 |
1-1/4 | 32 | 38 | 0.448 | -0.1~0.4 | 1.5 | 20 |
2 | 50 | 58 | 0.922 | -0.1~0.4 | 1.5 | 30 |
3 | 75 | 83 | 1.35 | -0.1~0.4 | 1.5 | 30 |
4 | 100 | 110 | 2.242 | -0.1~0.4 | 1.5 | 30 |
5 | 125 | 135 | 2.776 | -0.1~0.4 | 1.5 | 30 |
6 | 150 | 170 | 6.833 | -0.1~0.4 | 1.5 | 30 |
7 | 175 | 195 | 7.9 | -0.1~0.4 | 1.5 | 30 |
8 | 200 | 220 | 8.968 | -0.1~0.4 | 1.0 | 30 |
10 | 250 | 280 | 16.975 | -0.1~0.4 | 1.0 | 30 |
12 | 300 | 330 | 20.178 | -0.1~0.4 | 1.0 | 30 |
- Q: How are plastic tubes tested for quality and safety?
- Plastic tubes are tested for quality and safety through a series of rigorous evaluations. These evaluations typically include tests for physical properties such as tensile strength, flexibility, and durability. Additionally, they undergo assessments for chemical and biological safety, ensuring that they are free from harmful substances and do not pose any health risks. These tests can involve conducting chemical analyses, assessing stability under various temperature and pressure conditions, and examining the tubes for potential leaching or degradation. Overall, these comprehensive testing procedures ensure that plastic tubes meet industry standards and are safe for their intended use.
- Q: one of the tubes from the radiator cracked so i want to glue them together..
- Sounds like a good plan if you want your car to overheat from lack of coolant. JBweld might do it but it costs more than just replacing the hose.
- Q: Just curious, when there is only a bit of toothpaste left, I have to squeeze little by little from bottom up. But then after using it, I'll have to do the same thing next time around. Obviously the toothpaste has to settle down the tube. Why and how does it do that?
- The plastic material has internal stresses that retain the shape it was cast in originally. Since it is attached to a round head it tends to form a sort of flattened cone. The toothpaste moves back up the tube to fill the available space as it is a type of really thick fluid. The shape may also lead to the toothpaste moving upwards due to capillary action (similar to how water moves up a very thin straw) To combat this effect, you can buy a little squeezy thing that rolls over the tube to prevent the toothpaste from moving backwards, or you can fold/bend it over as you use it like many people do. I store mine upright on the cap so the toothpaste settles at the end I squeeze it out of. The tube also uses less counter space when you store it upright as compared to laid over on its side.
- Q: Can plastic tubes be used in high-pressure applications?
- Yes, plastic tubes can be used in high-pressure applications. However, it is important to select the appropriate type of plastic that can withstand the desired pressure range. Some plastics, such as polyethylene or PVC, have lower pressure ratings whereas others like nylon or PTFE can handle higher pressures. Additionally, the tube's construction and wall thickness should be considered to ensure it can safely contain the high-pressure fluid or gas without bursting or deforming.
- Q: Plastic pipes have steam, how to handle dry?
- We like PC plastic pipe is the use of air blowing dust, water vapor will suggest that you try the effect
- Q: where would be a good place to start looking? recycling places? arts and crafts? home depot? Im just looking for something rather cheap.
- Try PVC piping hard to find it in clear normally comes in white/grey but this am sure will do it you. Good luck
- Q: What are the common lengths of plastic tubes used for interior design?
- The common lengths of plastic tubes used for interior design vary depending on the specific project and purpose. However, standard lengths typically range from 1 to 10 feet, offering flexibility for various design applications and customization.
- Q: Looking for just the top lid, but everyplace only offers the lid, plastic cup and straws.
- off the counter at Mcdonalds
- Q: Do plastic tubes have any limitations in terms of material compatibility?
- Yes, plastic tubes have limitations in terms of material compatibility. Some chemicals or substances can react with certain types of plastics, causing them to degrade, become brittle, or even dissolve. It is important to consider the chemical resistance of the plastic material when selecting a tube for specific applications to ensure it is compatible with the intended substances.
- Q: Does the PVC-U drain plastic pipe need to be fabricated and installed?
- PVC-U plastic drainage tube placement should be calculated or not should be laying pipe support method, pipe diameter and special credentials resettlement environment and position to determine the situation: 1, laying underground drainage pipeline laying is not needed to calculate; includes 2 stent drainage pipeline, resettlement quota items should not be calculated. 3, debugging, placement, stability methods, such as integrated pipe laying, drainage pipe support or hanger, need to extend the distance of the support and hanger should be converted to increase.
Send your message to us
PVC Suction Hose Plastic Tubes
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 2000PCS kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords