PVC Pressure Pipe (PN10&16) ASTM, AS, ISO, GB Plastic Tubes - Various Colors
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: I was given an Mellita One:One coffee maker and I noticed when inter running it through a cycle it would leak all the water through the bottom. So I opened it up and noticed that one part of waterpump tubing is not attached so I attempted to use super glue to reattach it. So do you think it will hold during use?
- i do be conscious of a woman who mistook a tube of glue for her eye meds .... numerous hours later the medical institution fastened her up without genuine harm .... She had blood shot eyes for a week .... go determine. Rule of thumb: Is there a caution label on it ... some fool did it ! particularly who would of theory McDonalds espresso essential a caution label.
- Q: So I was eating GoGurt yogurt. And I think I accidentally swallowed a part or the jagged part on the top of the tube. I don't think it was very big. I'm guessing the size was the size of half of a dime or a 1/4 of a dime. I know this doesn't sound too bad, since I've heard people who swallowed pennies, then they were fine, but I don't know how to get rid of it. I can still breathe and drink normally, but when I talk for too long, my throat starts to hurt a little. So far, I've tried drinking lots of water, swallowing some food to push it down (rice. :D), coughing, vomiting, and clearing my throat but I think it's still there. I'm actually not sure if it's still there or if it is gone, or just made a cut so it hurts. But I don't want to go to the doctors or ER, I'm poor. Are there any other ways to get the plastic out? Oh and if I leave it there, how long will it take for it to go down my throat and digest?
- Try eating more rice. If that doesn't work try to stick your finger down your throat but not far enough to make you throw up. Try to pull it out. I did that once when I was choking on a cheeto. Good luck
- Q: i want to buy it
- Depends. You can get little pieces at $5 to $10, and elaborate setups up to $50. Gotta tell you though, I've had hamsters and rats with the plastic tube setups and they're a whole lot of fun--until it's time to clean them. As you may know, rodents can't control their sphincters so they poo and wee all over the place, and that includes the little tubes. If you have a whole bunch of them, it's a real pain in the tuckus to clean, especially since your pet will bring pieces of cedar shavings with it into the tubes to create little nests, and that's going to bind with the urine and feces and it'll get stuck in there and the whole thing is going to stink to high heaven until you just soak it all in bleach and then there's pieces of urine-soaked cedar shavings stuck to your sink and GAH!!! I will never do it again. I'd rather get a metal cage with multiple levels, or a whole bunch of toilet paper rolls to play in, cause they'll just chew on those until they're gone and you won't need to clean them.
- Q: Okay this is a really horrifying scenario and I'm panicking. I have two 6 weeks old baby alexandarine parrots. I feed them by hand through a syringe. I attach a small rubber tube at the end of the syringe and feed them slowly. However as I was just feeding one, the tube got loose and is now stuck in the parrot's throat. I'm very worried. I can't go to a vet as there is no avian vet in our area. What should I do? Please Please help!! I'll be really thankful.
- Go to a regular vet. Though they are not bird-specific, it is still a better chance than trying to remove it yourself and risk damaging their esophagus. Hopefully it's not too late. Please at least call a vet; if you can't go to them, it's possible they can at least tell you how to safely remove the tube.
- Q: Are plastic tubes impact-resistant?
- Yes, plastic tubes can be impact-resistant depending on the type of plastic used and the thickness of the tube walls.
- Q: Can plastic tubes be used for storing construction materials?
- Yes, plastic tubes can be used for storing construction materials. Plastic tubes offer various benefits such as durability, resistance to moisture, and ease of transportation. They are commonly used for storing items like concrete, cement, sand, gravel, and other construction materials. Additionally, plastic tubes can be sealed tightly to protect the materials from external elements, making them a convenient option for construction storage.
- Q: I have a hole ins a plastic tube that contains water how do I seal the hole?
- Epoxy putty and a pencil.
- Q: the tubing , on the door, where water depenses is cracked. how do I replace the tubing?
- Wow! Are you wanting to replace all the tubing inside the door? This can be a very difficult if not impossible job to accomplish. There are countless components that require removal to expose all the tubing for replacement. Although you just ask about the door, the tubing going to the icemaker is embedded in the permanent foam insulation in the cabinet casing. It is also installed in the foam inside the door. They do this to prevent the water inside the tubing from freezing. Most water dispensers are located in the freezer side door. If you just want to replace the short stub of tubing that the water passes through at the dispenser, you should be able to cut off the part that is cracked or split and glue a short food grade piece of tubing on to it using food grade adhesive (available at restaurant supply stores). (Use a short collar of the next larger diameter tubing to join the two pieces.Also available at the supply store.) Good luck!
- Q: Why, in general, the strong tube is plastic tubes, weak tubes are metal tubes?
- The metal tube can be grounded to shield, eliminate interference, and reduce the electromagnetic interference between the weak current
- Q: Are plastic tubes suitable for hydrostatic pressure testing?
- Yes, plastic tubes are suitable for hydrostatic pressure testing.
Send your message to us
PVC Pressure Pipe (PN10&16) ASTM, AS, ISO, GB Plastic Tubes - Various Colors
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords