PVC Pressure Pipe GB/T10002.1 2006 on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q: Rubber soft joint, what brand of good, the best price is more reasonable. Don't say anything expensive.
- The rubber joints produced throughout the country have the longest history in Shanghai, and have the characteristics of the type and sales volume of Gongyi city. They have been sold in the plumbing market all over the country
- Q: Can the high-pressure rubber hose be followed by water pipes? Will it be poisonous?
- No, because I did not meet the drinking water level requirement!! Hose with drinking water hose!! Drinking for a long time is poisonous!
- Q: How can you pump out the water from a fishpond with a rubber tube?
- Can hand over water inlet, the water inlet end will be submerged, another person to the outlet to open the outlet end, both sides are ready to open both ends of pumping, the pumping process must remain in the water inlet end of the pond, otherwise have to repeat the process.
- Q: How to detect the reliability of rubber hose
- Hydraulic test verification pressure test: Test hose and assembly under verification pressure, continue 30s-60s, whether to produce leakage, deformation and damage. Compression deformation test: keep 1 minutes under the specified pressure (work pressure, verification pressure or other pressure below the proof pressure), measure the length and diameter of the hose, twist angle and bend. Bursting pressure test: Determination of the pressure at which the hose burst during the specified step-up rate. Leak test: save 5min at 70% of the minimum blast pressure, and check again and again for leaks or damage. Due to the fact that water is often used in tests, the pressure and leakage pressure at normal temperatures may be slightly lower at normal temperatures.
- Q: Which is better for binding files with rubber tubes and cotton threads?
- X rubber hose and rubber band type light aging fast, not suitable for long-term preservation, cotton is afraid of water and insects
- Q: What is the rubber sleeve flange connection sleeve?
- Soft rubber joints commonly known as flexible rubber joint, its products are widely used in water, electricity, chemical industry, ship system, the main performance of high pressure resistance, good elasticity (axial, transverse and angular displacement) noise, shock, light weight, convenient installation, flexible use, easy disassembly and maintenance, with acid resistance, oil etc.. The product can be automatically extended during natural weather changes in use. The structure of material by dip outside glue nylon cord cloth with high strength and aging resistance of polar rubber material. In order to prevent the product from shrinking naturally in the long run and to reduce the aging and cracking, the netted steel wire is used for multi body protection.
- Q: The main features of Linatex rubber tube or what are the characteristics?
- The main characteristics are excellent wear resistance, high impact resistance, high pressure resistance
- Q: Single ball chloroprene rubber flexible joint, Shanghai Song Jiang rubber ball joint manufacturer where?
- Rubber joint is also called soft rubber pipe joint, flexible rubber joint, soft rubber joints, rubber joints, high-pressure rubber joints, rubber shock absorber, compensator.
- Q: Flex rubber joint installation skills, what are the materials of rubber soft joint?
- Flexible rubber joint is normal for medium temperature of 0-60 DEG C usually water medium such as oil, acid, high temperature and other corrosive and texture should be selected under the peace situation should be relatively Tenai data can not be blindly on rubber joint or universal.
- Q: Laboratory condensate water pipe must use rubber tube, shall not use latex tube reasons
- Suction flat test: in the 1min vacuum, after maintaining 10min, with diameter of 0.9 times the diameter of the hose rolled over, check the degree of collapse of the hose. Some standards used to measure the rate of change in the outer diameter of the hose to indicate the extent of deformation of the hose.
Send your message to us
PVC Pressure Pipe GB/T10002.1 2006 on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords