Ppr Pipe Plastic Pipe Used in Garden Irrigation Made in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
ppr pipe plastic pipe used in garden irrigation Made in China
Specification:
PPR Pipe Fitting
1. OEM Available
2. Material:R200P
3. ISO15874 DIN8077/8078
4. ISO9001 14001 AENOR
PPR pipe and fitting size:
Pressure | PN1.0Mpa | PN1.6Mpa | PN2.0Mpa | PN2.5Mpa |
outer diameter dn(mm) | Wall Thickness en(mm) | Wall Thickness en(mm) | Wall Thickness en(mm) | Wall Thickness en(mm) |
20 | 1.9 | 2.3 | 2.8 | 3.4 |
25 | 2.3 | 2.8 | 3.5 | 4.2 |
32 | 3.0 | 3.6 | 4.4 | 5.4 |
40 | 3.7 | 4.5 | 5.5 | 6.7 |
50 | 4.6 | 5.6 | 6.9 | 8.4 |
63 | 5.8 | 7.1 | 8.7 | 10.5 |
75 | 6.8 | 8.4 | 10.3 | 12.5 |
Introduction of Our Products:
The comprehensive technical performance and economic indicator of PP-R are much better than galvanized pipe, UPVC pipe, polyethylene-aluminum compound pipe, PE-X (cross-linked polyethylene) and polybutylene pipe etc. For this reason PP-R is the leading products and widely used for feed-water piping in developed countries in Europe and America.
Nowadays PPR pipes win more attention and have been used all over the whole world more widely with its excellent sanitization performance, high heat resistance, compression resistance, corrosion resistance, pliability and seismic performance which make PP-R the real environmental friendly pipe.
Applications PPR Pipe :
1) Cold and hot water supply systems for civil and industrial constructions, e.g. in residential buildings, hospitals, hotels, school and office buildings, ship building
Irrigating system for gardens and green houses
2) Public and sport facilities such as swimming pools and stadiums
3) For rainwater utilization systems.
- Q: How to choose the connection mode of clamp type flexible pipe joint correctly
- The overall price of steel ring is lower than that of pipe endSummary: the middle and high pressure pipeline is recommended to use the pipe end connection, and the middle and low pressure pipeline is recommended to use the steel ring connectionThe customer can choose the clamp type flexible pipe joint (steel ring joint) or clamp flexible pipe joint (pipe end connection) according to the demand to reduce the purchasing cost.
- Q: no i like being a boy i got my own fire hose ^_^
- You can use wire nuts, butt connectors, or plain old electrical tape to cover the metal ends of the wires, and then just tuck them up out of the way and leave them there. The big thing to be aware of is that some areas have codes requiring the wired smoke detectors on buildings built after a certain year, so check with your local building authority before you remove the wired ones. If you are in such an area and are concerned about them not working during an electrical outage, just add a few of the battery powered ones in critical areas (like by bedrooms). If you are in one of these areas, you could get in a lot of trouble (fines) if you remove the wired ones, so make sure of the laws before you do so. I know this because I took classes and had a license for a while as a Home Inspector. I don't do it anymore because I went back into my previous career, but I still remember most of it. I hope this helps.
- Q: Consult the problem of the pressure at the entrance and exit of the pipe jointNow I'm in the oil system design has a 4 joint, one port as the oil inlet, the other three ports as an oil outlet, so, now oil inlet pressure is 2MPA, the oil outlet pressure is not each only 2/3=0.66MPA, because in this way, each oil outlet the flow of oil inlet flow only 1/3, the trouble which master to help me explain, I understand you talked about from the truth, I added 10 points
- The oil outlet is 2MPa, too,The relation between the pressure at the outlet and what you call the inlet pressure is as follows:
- Q: Can anyone please tell me what is the BMS (Bulilding Management System). Is there any regulation for BMS system?Where it has to be fitted and who are the approval authorities.
- No argument that White Phosphorous became used. using white phosphorous against civilians is illegitimate decrease than international regulation. utilising any munition concentrated on civilians is constrained by utilising the Geneva conventions. Chemical weapons convention does not evaluate WP a chemical weapon. unlawful use of white phosphorous by utilising Israel in Gaza?' utilising phosphorus to mild up a aim or create smoke is valid decrease than international regulation. there became no info that Israel became intentionally utilising phosphorus in a questionable way, alongside with burning down homes or consciously putting civilians in possibility.
- Q: How tight is the gas pipe joint?
- For a fixed gas pipeline, it should be installed by a professional Gas Co, and the individual shall not change the sealing of the joint. It should be sealed by special sealant. Plastic pipes should not be too long, should be far away from the electrical circuit, and the high temperature area of the hearth.
- Q: I just came into contact with this kind of things.. now I can't figure out how to do it. Who can help me to solve it? Is there any way to calculate? For example, 3/4 pipe fittings, how many millimeters is it? How can I count it? Thank you!
- Pipe fittings 3/4 refers to the pipe fittings of six points (6 British points), DN (diameter) of 20mm, the outer diameter of 26.8mm.
- Q: Please specify a bit, 10 finger tube diameter or outside diameter, screw thread is the pipe thread size, cone or cylindrical pipe thread?
- Dg is the standard name, DN, is called Dg=DN, in standard GB, GB, Dg, DN are mm (mm), "Dg DN, the name is called" nominal diameter ", can be processed R 1/4" external tapered threadThe diameter of the pipe can be divided into outer diameter, inner diameter and nominal diameter.
- Q: Hydraulic hose joint is spherical and cone sealing, threaded connection, what is the form of joint?
- WREN we also do ultra high pressure joint (hydraulic joint) and all hydraulic wrenches, hydraulic pumps, etc., you can contact us to negotiate!
- Q: When was the lightning rod invented?
- According to my Perry's reference there are pipe thread standards up to 24 inch but you typically only see threaded piping in sizes of about 3 inch and below.
- Q: Well, one day, due to lack of excitement in my day, I decided to go on a little computer exploration adventure.I went to Control Panel System Hardware Device Manager Device Manager.However, once I clicked &Device Manager,& I was restricted from accessing &mmc.exe.&So what is this &mmc.exe&/&Device Manager,& and what does it do?
- Sounds like you want to build a go-cart frame from pipe? If so, you should know that ordinary steel pipe, the type usually used for water, is rather fragile will crack easily for it's weight. Lots of people prefer to use structural tubing which has design and alloy properties that make it better for such things. It will resist bending cracking, but you'll probably have to weld it. If you're talking about very low power and low speed and have a lot of scrap pipe and fittings to play with, then you should think about triangulation. Concentrate on making your frame look like a lot of triangles.
Send your message to us
Ppr Pipe Plastic Pipe Used in Garden Irrigation Made in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches