Ppr Pipe Plastic Pipe Used in Garden Irrigation Made in China with Ppr Materials
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
ppr pipe plastic pipe used in garden irrigation Made in China
Specification:
PPR Pipe Fitting
1. OEM Available
2. Material:R200P
3. ISO15874 DIN8077/8078
4. ISO9001 14001 AENOR
PPR pipe and fitting size:
| Pressure | PN1.0Mpa | PN1.6Mpa | PN2.0Mpa | PN2.5Mpa |
outer diameter dn(mm) | Wall Thickness en(mm) | Wall Thickness en(mm) | Wall Thickness en(mm) | Wall Thickness en(mm) |
| 20 | 1.9 | 2.3 | 2.8 | 3.4 |
| 25 | 2.3 | 2.8 | 3.5 | 4.2 |
| 32 | 3.0 | 3.6 | 4.4 | 5.4 |
| 40 | 3.7 | 4.5 | 5.5 | 6.7 |
| 50 | 4.6 | 5.6 | 6.9 | 8.4 |
| 63 | 5.8 | 7.1 | 8.7 | 10.5 |
Introduction of Our Products:
The comprehensive technical performance and economic indicator of PP-R are much better than galvanized pipe, UPVC pipe, polyethylene-aluminum compound pipe, PE-X (cross-linked polyethylene) and polybutylene pipe etc. For this reason PP-R is the leading products and widely used for feed-water piping in developed countries in Europe and America.
Nowadays PPR pipes win more attention and have been used all over the whole world more widely with its excellent sanitization performance, high heat resistance, compression resistance, corrosion resistance, pliability and seismic performance which make PP-R the real environmental friendly pipe.
Applications of PPR Pipe ：
1) Cold and hot water supply systems for civil and industrial constructions, e.g. in residential buildings, hospitals, hotels, school and office buildings, ship building
Irrigating system for gardens and green houses
2) Public and sport facilities such as swimming pools and stadiums
3) For rainwater utilization systems.
4)Connecting pipe for air conditioners
- Q: and then you can hook the other side to your clothes, etc, so you can wear it?
- A Kong toy. They come in large sizes. The black Kong is reportedly indestructible. You stuff Kongs with goodies or food and your dog spends a lot of time trying to remove the contents. You could use the Kong as a ball. The Kong is an abnormal shape, so beware, it bounces crazily. It's great jaw stimulation, and terrific mental stimulation too.
- Q: I am building a small rolling road to test my nitro RC cars out and i am trying to figure out the best way to simulate a realistic resisance for the engine and transmission to work againstany ideas?
- Ive worked in a company that manufactured plastic containers and it sounds like an issue in the molding department
- Q: Does the alarm go off on a saturn L100 when you open it with a key? i lost the remote to my car and i don't want to try it because im not sure how to turn the alarm off
- In your position, I'd find a low place (such as the first floor ceiling, or in the basement if possible) where the existing pipe is clear and cut it off square. Before doing so, get a flash light and mirror if needed and determine where the pipe is supported. With those cast pipes being as heavy and brittle as they are, it's important to keep keep them supported securely. When possible, I like to use a circular saw or 4 angle grinder (cut off wheel) to do the cutting. They cause less vibration than many alternatives. If you need to use a sawzall, use a fine toothed metal cutting blade. Consider fernco fittings or others of their type to join the new PVC to the existing cast. You can get them from Home Depot, Lowes, Ace, etc. If you use silicone to seal up the new fittings (shouldn't be needed) be sure that everything is darned good and dry first.
- Q: What is the manual pre assembly procedure for the EO-2 joint?
- I. pre assembled1, EMB card sleeve type pipe joint pre assembly of the most important link, directly affect the sealing reliability. A dedicated preprocessor is usually required. The small diameter can be pre joint in a vise. The concrete method is to use a joint as the mother's body and press the nut and the sleeve onto the tube. The utility model mainly comprises a sleeve type through pipe joint, a clamping sleeve type end through connection head, a clamping sleeve type three way pipe joint and other patterns. I found that even if the same manufacturer of a batch of goods, the cone of these joints on the depth of the hole is often different, resulting in a leak, and this problem is often neglected. The correct approach is to connect the end of the pipe with what kind of joint, and the corresponding connection ends are prefabricated with the same type of joint, so that the leakage problem can be avoided to the maximum extent.
- Q: I would like to ask who has 24 degrees taper hydraulic pipe joint processing drawings, please send me, thank you very much
- If you can, then I have thousands of pipe joints drawings, are the original pipe joint processing factory technician to do when painting,
- Q: What do you mean by the next connection in the pipe connection? How do you use it?
- The difference with the common joint is that the thread on one side is longer, and the next joint is fixed to the board by the locking nut
- Q: When i open my truck manually the alarm goes off and i have to put the key in the ignition for it to stop. I would like to know if there is someway to remove the alarm system or stop it from alarming whenever i open it manually
- The second question is Calcium Oxide because Calcium Carbonate Calcium Oxide + Carbon Dioxide.
- Q: Obviously a bike, but what else will i need so far i can include the following into my budget:-insurance-helmet-gloveswhat other safety equipment will there be? ive seen full body suits, and im assuming there is a specific boot to wear im just wondering as a starting motorcycler what should i be looking to spend in total for the bike insurance and the safety equipment.
- The cheapest and easiest way to repair a leak in a copper pipe. If you do not have the tools and experience, is to 1.)determine the size of the pipe, 2.) if it is a elbow, straight piece aka coupling etc. Then go to Home Depot and ask for Shark-Bite- Fittings needed to complete repair. You then follow instructions and assemble. No need to use fire/ torch, and wait for house to drain etc. As long as you follow instructions, the repair will be easy and will not come apart. This is a much safer way to make a repair in copper pipe. If it is a tight repair and/or a section of pipe must be replaced, you can use cpvc (yellow looking pvc pipe), copper tubing. I have used Shark-Bite Fittings, ***Very Important***, is to follow instructions
- Q: How to compile the welding technology of 12CrlMoVG header and pipe joint
- (2) before welding, before welding, the pipe should be 30 degrees, and the inside and outside 15mm range of the pipe should be polished to be metallic. The pipe clearance is 1~3mm. When the actual clearance is too large, the transition layer shall be deposited on the side of the pipe groove. Set up temporary shelter facilities, strictly control the wind speed at the welding operation place, and the air hole is easy to generate because the wind speed is beyond a certain range.(3) the operation uses WST315 manual tungsten argon arc welding machine, the welder itself is equipped with high frequency arc striking device, and the high frequency arc striking can be adopted. The arc and arc electrode, such as arc too fast, easy to produce crater crack, so the operation will lead to the edge of the pool or parent material is thick, and then gradually reduced the pool slowly extinguish arc, and finally close the protective gas.
- Q: Is it safe to use a fire hose as a substitute for an enema? Just wondering. Plugged up in Poughkeepsie.?
- I believe what you refer to is called PEX. There are other trade names as well, but this is what I use. The piping itself will contract when thawed and will (has not yet) not leak. You should be aware that the piping is supposed to be freeze resistant, but the brass fittings used for the connections are NOT. Find some comfort in the fact that It is extremely unlikely that the fitting will freeze and crack, given the amount of flexing in the PEX piping. Also know that this type of piping is not designed to be used outdoors or where sunlight may contact it. The components will breakdown leading to failure. The piping needs to be covered to prevent UV light from hitting it. There are other factors too, like needing special tools for the connections and not scratching or gouging the outer sheath, etc.
Send your message to us
Ppr Pipe Plastic Pipe Used in Garden Irrigation Made in China with Ppr Materials
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
