Plastic Tubes PVC Pipe Length:5.8/11.8m Specification:16-630mm Standard:GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: Are plastic tubes resistant to mold and mildew?
- Yes, plastic tubes are generally resistant to mold and mildew due to their non-porous nature and lack of organic materials that promote mold growth.
- Q: Are plastic tubes suitable for medical diagnostics?
- Yes, plastic tubes are suitable for medical diagnostics. They are commonly used in various diagnostic procedures such as blood collection, urine analysis, and specimen transport. Plastic tubes are lightweight, disposable, and offer excellent chemical resistance, making them safe and hygienic for medical use. They also allow for easy identification, labeling, and storage of samples, ensuring accurate diagnostics.
- Q: ...placing them in a humidor? Seems to me that they won't achieve proper humidification if they're wrapped in plastic or stored in a sealed metal tube. What say you?
- Cigars in a sealed glass or metal tube should already be humidified. For storing, you could open the tube and place the opened tube in your humi As for the cellophane, its a matter of personal preference - leaving them on will protect them if you decide to carry them later. Cellophane is porous and will alllow humidity to pass thru.
- Q: how we can design a simple total head tube ??
- A tube with an open ends and connected straight (at right angle) into the side of a pressure container like a pipe or a vessel is called a piezometer. Fluid will rise in the tube equivalent to the static pressure in the container. In a pipe the fluid will probably also be moving and so will have some dynamic energy. If the tube tip has been bent 90 deg. and inserted ( preferably to the center) so that active end is facing upstream, the impact of the moving fluid will convert to additional height of fluid in the tube so that the total head will be the sum of the static equivalent plus the velocity equivalent in feet or meters. That tube is sometimes called an impact tube. The best arrangement is to close the active end of the tube and drill a hole at 90 deg near the end. This allows for the straight tube to be more easily inserted through a small round opening with a sealing gland to stop leakage. This short part can be metal and a clear plastic or glass tube extension fitted to it. A Pitot tube is a combination of the two types of tube and is commonly utilized to measure velocity by subtracting the two heads. It is used in any fluid, water or air, open or contained. However, the Pitot like most other pressure devices usually employs a gage rather than open tubes. The open tubes will limit the amount of pressure to be measured because for each pound of measured pressure (psig), water will rise 2.31 feet.
- Q: Are plastic tubes suitable for point-of-purchase displays?
- Yes, plastic tubes are suitable for point-of-purchase displays. They are versatile, lightweight, and can be easily customized in terms of size, shape, and color. Plastic tubes can effectively showcase products, capture attention, and enhance the overall visual appeal of the display. Additionally, they are durable, cost-effective, and can accommodate various marketing materials such as brochures, samples, or promotional items.
- Q: Can plastic tubes be used for fluid transfer?
- Yes, plastic tubes can be used for fluid transfer.
- Q: I once saw a tunnel tube part that is just a small flat part with holes in it. It would allow you to connect, say, two cages together and allow the hamsters in those cages to see and smell each other but NOT pass through. I have been looking for this part but I cannot seem to find it again. If anyone has a website, I would appreciate it very much
- Petco petsmart try OKorder OKorder for better prices but most definately petco n.petsmart will hav wat ur looking for!!!!!
- Q: How are plastic tubes stored to maintain their shape?
- Plastic tubes are typically stored in a straight and vertical position to maintain their shape. They can be placed in specially designed racks or holders, ensuring that they are not bent or twisted. This storage method prevents any deformation or warping of the tubes, allowing them to retain their intended shape.
- Q: Are plastic tubes suitable for vacuum applications?
- Plastic tubes can be suitable for vacuum applications depending on their material composition and design. Some plastic tubes, such as those made from materials like polytetrafluoroethylene (PTFE), are highly resistant to chemical and thermal degradation, making them suitable for vacuum applications. However, it is important to consider the pressure and temperature limits of the specific plastic tube being used to ensure it can withstand the desired vacuum conditions without deformation or failure.
- Q: Can a plastic pipe be evacuated into a vacuum?
- The general is not, because the plastic tube is made of PVC material such as silica gel, the obturating performance is not good
Send your message to us
Plastic Tubes PVC Pipe Length:5.8/11.8m Specification:16-630mm Standard:GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
