Plastic Profile and Window and Door Frame Factory with HIgh Quality
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t
- Supply Capability:
- 1000 m.t/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description for PVC UPVC Profile
A casement window is hinged at the side and opens outward. It provides excellent ventilation,at times literally reaching out and catching the breeze. It looks like a narrow picture window because, unlike double hung or sliding windows, it has no rail to obstruct the view.
Some casement windows are simply pushed open, but most have a hand crank. Screens are placed on the inside of the window, where they're more protected from the elements. If you're installing windows over a sink, countertop or appliance, a casement window with a crank can be the perfect solution.
One of the things to look for in a casement window is how far it opens. The best open up perfectly perpendicular to the house for maximum ventilation
They are opened with a crank, lever, or cam handle, which is placed around hand height or at the bottom and serves as a window lock.
A crank, stay, or friction hinge is necessary when the window opens outward, to hold the window in position despite wind.
Often the glass panes are set in a rabbeted frame and sealed with beveled putty or glazing compound to secure the glass.
- Q:The state of high-rise residential building doors and windows materials are not allowed to use steel profiles are expressly provided?
- Plastic can not be used mainly to see its ability to withstand wind pressure can not meet the requirements, and the state did not force the request. At present, only Qinghai is limited to plastic steel, it is because the UV is relatively strong in Qinghai, steel weather resistance is not good aluminum. In fact, as early as ten years ago, steel doors and windows can be used in the tall buildings in Xiamen, indicating the use of absolutely no problem, provided that your doors and windows must be reasonable design, through the local fifty years once the wind. But also in the doors and windows production and installation process to comply with the specification.
- Q:Steel windows and aluminum windows compare which is more expensive
- Sound insulation performance: Aluminum windows and plastic window gap sealing level is basically the same, the sound insulation performance is basically the same.
- Q:What is the amount of plastic profiles
- For the sliding window, the commonly used fan frame of the European profile, for example, the amount of lap by the window frame ribs, window groove groove and pulley size decision. Usually the ribs, the same size (also has a rib size larger than the groove size), 20 ~ 22mm. Fan groove size minus the pulley height, that is, fan and the next frame of the lap, pulley height is generally 12mm, The amount of lap is 8 ~ 10mm. Industry standard requirements between the frame fan lap uniform, then the fan and the box on the amount of overlap is 8 ~ 10mm.
- Q:It is good for aluminum alloy
- It is also good for aluminum alloy. The strength of the aluminum alloy is three times the strength of plastic, wind pressure strength than plastic two high. Aluminum alloy frame cross-sectional area of only steel 1/3, window frame weight is much lighter. Plastic doors and windows due to the strength of the material and low steel, although the steel lining by adding enhanced, but its wind pressure and watertight performance than the aluminum alloy window two levels. Just because the plastic window steel lining is not in its profile lap angle to connect the complete frame system, window frame, fan four corners and the T-shaped plastic angle of penetration is relatively low, so the high-rise buildings should be used with caution.
- Q:The difference between steel and aluminum alloy profiles
- Plastic windows are easy to weather, aluminum alloy will not. If you want to be insulated when you do windows with double glass
- Q:Fence material outside the plastic inside is iron or steel this material called
- Ordinary steel profiles will be deformed, the color is relatively monotonous, usually white, if you want to change the color will add PVC with the film, a long time the PVC film will fade. Automotive supplies industry in the use of steel, the material requirements are relatively high, the most typical is the engine chassis protection board, has been widely used by most riders. Plastic steel is also used in the production of tapered roller bearing cage. Plastic cage has: 1, reduce the friction and roller slip, reduce the working temperature; 2, improve safety and performance; 3, fail safe mode, not stuck.
- Q:What is the broken bridge of aluminum? What are the characteristics?
- Broken bridge aluminum bridge is actually aluminum material, but in the middle of the aluminum through the insulation bar, the aluminum cut off the formation of broken bridge, which is characterized by: 1, broken bridge aluminum insulation is good, good air tightness: aluminum-plastic composite profiles in the plastic thermal conductivity is low, good insulation effect, coupled with a good air tightness, in the cold area despite the outdoor minus tens of degrees, Indoor is warm as spring. ?????? 2, broken bridge aluminum sound insulation is good: its structure has been carefully designed, seams tight, using the insulating glass. Test results The sound insulation standard is: 30db, in line with the relevant noise material standards. ?????? 3, broken bridge aluminum is not easy to deformation, impact resistance: the broken aluminum and aluminum plastic composite profile of the outer surface of aluminum alloy material, so it is much stronger than the impact resistance of plastic window profiles, long years of use is not easy to deformation.
- Q:Is the powder produced when the crushed plastic is crushed?
- 1, plastic shredders and power units to be installed firmly. If you need plastic crusher long-term fixed operation, it should be fixed on the basis of cement; if you need plastic crusher flow operation, the unit should be installed in the angle made of iron on the base, and to ensure that the power machine (diesel or motor) and plastic The pulley groove of the crusher is in the same plane of rotation. 2, after the installation of plastic crusher to check the Department of fasteners fastening, if loose to be given to tighten. Also check the belt tightness is appropriate. 3, plastic shredder before starting, first hand rotation of the rotor, check the claws, hammer and rotor operation is flexible and reliable, broken room with or without collision phenomenon, whether the direction of rotation of the rotor and arrows in the same direction, Plastic crusher lubrication is good. 4, do not casually replace the pulley, to prevent the speed is too high to cause the explosion chamber explosion, or too low speed affect the efficiency of the pulverizer. 5, plastic shredder should be maintained after the first start idle 2 ~ 3min, no abnormal phenomenon after feeding work. 6, the work should always pay attention to the operation of the plastic crusher, first of all, to be uniform to prevent the blockage of waste room; Second, do not work for a long time overload. If you find a vibration, noise, bearing and body temperature is too high, such as spraying out of the phenomenon, should immediately stop checking, troubleshooting can continue to work.
- Q:PVC plastic profiles dip in the seam, how to deal with seamless docking
- Fill too much for the current market price of profiles is low, and the pattern of rising raw material prices, profile manufacturers are to reduce the cost of the article, the formal profile manufacturers through the optimal combination of formula is not to reduce the quality of the premise, Cost; some manufacturers are in reducing costs while also reducing the quality of products. As a result of the ingredients of the formula, the most direct and effective way is to increase the filler, in the PVC-U plastic profile commonly used filler for the calcium carbonate. Most of the previous formula system is to add heavy calcium, the purpose is to increase the rigidity and reduce costs, but the calcium particles because of their irregular shape and relatively thick particle size and PVC resin body compatibility is poor, so the number of its added Low, and the number of copies will increase the color and appearance of the impact. Now with the development of technology, most of the use of ultra-fine light activated calcium carbonate, and even nano-calcium carbonate, which not only play a role in increasing rigidity and filling, but also has the role of modification, but its filling is not Infinitely, the proportion should be controlled. Now some manufacturers in order to reduce the cost of calcium carbonate added to 20-50 copies, which greatly reduces the physical and mechanical properties of profiles, resulting in this chapter referred to the phenomenon of brittle profile.
- Q:China 's top ten brands of steel profiles in 2014
- Vikavica plastic doors and windows are produced by the German company of Vicat plastics in Shanghai. In the eastern coastal provinces of China occupies a considerable market. Is one of the top ten brands of steel doors and windows in China. It is a foreign - funded enterprise. It is one of the large - scale steel - making windows and doors enterprises directly under the Ministry of Construction of the new world. Companies in China's northeast Liaoning Anshan, China's steel doors and windows is one of the top ten brands.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Plastic Profile and Window and Door Frame Factory with HIgh Quality
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t
- Supply Capability:
- 1000 m.t/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords